Abstract
This investigation describes the potential of sol–gel derived alumina coating on the corrosion resistance of magnesium metal in 3.5 % NaCl solution. Coating deposition was performed by dip coating technique using boehmite (AlOOH) sol followed by their sintering at 250 °C. EDX and FTIR analysis confirmed that alumina is a main constituent of the coating. Microstructural examination of the coated surface demonstrated amorphous nature of coating of 2–3 µm in thickness. Potentiodynamic polarization and electrochemical impedance measurements indicated a considerable improvement in the corrosion resistance of the coated substrates.
Similar content being viewed by others
References
Cao FH, Len VH, Zhang Z, Zhang JQ (2007) Corrosion behavior of Mg and its alloy in NaCl solution. Russ J Electrochem 47:837–843
Baril G, Pebere N (2001) The corrosion of pure magnesium in aerated and de-aerated sodium sulphate solution. Corros Sci 43:471–484
Makar GL, Kruger AJ (1990) Corrosion studies of rapidly solidified magnesium alloys. J Electrochem Soc 37:414–421
Hwang DY, Kim YM, Shin DH (2009) Corrosion resistance of plasma-anodized AZ91 Mg alloy in the electrolyte with/without potassium fluoride. Mater Trans 50:671–678
Jamesh MI, Zhao Y, Wu G, Jin W, McKenzie DR, Bilek MM, Chu PK (2014) Effects of zirconium and nitrogen plasma immersion ion implantation on the electrochemical corrosion behavior of Mg–Y–RE alloy in simulated body fluid and cell culture medium. Corros Sci 86:239–261
Gray JE, Luan B (2002) Protective coatings on magnesium and its alloys. J Alloys Compd 336:88–113
Song GL, Shi Z (2014) Corrosion mechanism and evaluation of anodized magnesium alloys. Corros Sci 85:126140
Song S, Shen WD, Liu MH, Song GL (2012) Corrosion study of new surface treatment/coating for AZ31B magnesium alloy. Surf Eng 28:486–490
Fini MH, Amadesh A (2013) Improvement of wear and corrosion resistance of AZ91 magnesium alloy by applying Ni–SiC nanocomposite coating via pulse electrodeposition. Trans Nonferr Met Soc China 23:2914–2922
Shashikala AR, Umarani R, Mayanna SM, Sharma AK (2008) Chemical conversion coatings on magnesium alloys—a comparative study. Int J Electrochem Sci 3:993–1004
Kartsonakis IA, Balaskas AC, Koumoulos EP, Charitidis CA, Kordas G (2012) Evaluation of corrosion resistance of magnesium alloy ZK10 coated with hybrid organic–inorganic film including containers. Corros Sci 65:481–493
Jin F, Chu PK, Xu G, Zhao J, Tang D, Tong H (2006) Structure and mechanical properties of magnesium alloy treated by micro-arc discharge oxidation using direct current and high-frequency bipolar pulsing modes. Mater Sci Eng A 435–436:123–126
Hu W (2012) Protective diffusion coatings on magnesium alloys: a review of recent developments. J Alloys Compd 520:11–21
Senf A, Broszei E (1999) Wear and corrosion protection of aluminum and magnesium alloys using chromium and chromium nitride PVD coatings. Adv Eng Mater 1:133–137
Liu DM, Troczynski T, Tseng WJ (2001) Water-based sol–gel synthesis of hydroxyapatite: process development. Biomaterials 22:1721–1730
Zhang S, Li Q, Fan J, Kang W, Yang X (2009) Novel composite films prepared by sol–gel technology for the corrosion protection of AZ91D magnesium alloy. Prog Org Coat 66:328–335
Ćurković L, Ćurković HO, Salopek S, Renjo MM, Šegot S (2013) Enhancement of corrosion protection of AISI 304 stainless steel by nanostructured sol–gel TiO2 films. Corros Sci 77:176–184
Tiwari SK, Tripathi M, Singh R (2012) Electrochemical behavior of zirconia based coatings on mild steel prepared by sol–gel method. Corros Sci 63:334–341
Salahinejad E, Hadianfard MJ, Macdonald DD, Mozafari M, Vashaee D, Tayebi L (2013) A new double-layer sol–gel coating to improve the corrosion resistance of a medical-grade stainless steel in a simulated body fluid. Mater Lett 97:162–165
Dias SAS, Lamaka SV, Nogueira CA, Diamantino TC, Ferreira MGS (2012) Sol–gel coatings modified with zeolite fillers for active corrosion protection of AA2024. Corros Sci 62:153–162
Ramírez-del-Solar M, Esquivias L, Craievich AF, Zarzycki J (1992) Ultrastructural evolution during gelation of TiO2-SiO2 sols. J Non Cryst Solids 147–148:206–212
Giampaolo Conde ARD, Puerta M, Ruiz H, Olivares JL (1992) Thick aluminosilicate coating on carbon steel via sol–gel. J Non Cryst Solids 147:468–474
Guglielmi M, Festa D, Innocenzi PC, Colombo P, Gobbi M (1992) Borosilicate coatings on mild steel. J Non Cryst Solids 147:474–477
Shane M, Macartney ML (1990) Sol–gel synthesis of zirconia barrier coatings. J Mater Sci Lett 25:1537–1544
Miyazawa K, Suzuki K, Wey MY (1996) Microstruclure and oxidation-resistant property of sol–gel-derived Zr02–Y201 films prepared on austenitic stainless steel substrates. J Am Ceram Soc 78:347–357
Maggio RD, Fedrizzi L, Russ R, Scardi P (1996) Dry and wet corrosion behaviour of AISI R.D. 304 stainless steel coated by sol–gel ZrO2–CeO2. Thin Solid Films 286:127–135
Wang D, Bierwagen GP (2009) Sol–gel coatings on metals for corrosion protection. Prog Org Coat 64:327–338
Ruhi G, Modi OP, Singh IB (2009) Pitting of AISI 304 SS coated with nano structured sol–gel alumina coating in chloride containing acidic environment. Corros Sci 51:3057–3063
Ruhi G, Modi OP, Singh IB (2009) Corrosion behaviour of nano structured sol-gel alumina coated 9Cr–1Mo ferritic steel in chloride bearing environment. Surf Coat Technol 204:359–365
Ruhi G, Modi OP, Singh IB (2009) Effect of sintering atmosphere on the corrosion and wear resistance of sol–gel alumina coated mild steel surface. Corrosion 65:758–764
Ardelean H, Marcus P, Fiaud C (2001) Enhanced corrosion resistance of magnesium and its alloys through the formation of cerium (and aluminium) oxide surface films. Mater Corros 52:887–889
Wilson S, Howthrone HM, Yang Q, Troczynsk T (2000) Sliding and abrasive wear of composite sol–gel alumina coated alloys. Surf Coat Technol 133(389):396
Gao JH, Shi XY, Yang B, Hou SS, Meng EC, Guan FX, Guan SK (2011) Fabrication and characterization of bioactive composite coating on Mg–Zn–Ca alloy by MAO/sol–gel. J Mater Sci Mater Med 22:16811687
Wang H, Akid R, Gobara M (2010) Scratch-resistant anticorrosion sol–gel coating for the protection of AZ31 magnesium alloy via a low temperature sol–gel route. Corros Sci 52:256–2570
Phani AR, Gammel FJ, Hack T, Haefke H (2005) Enhanced corrosion resistance by sol-gel based ZrO2–CeO2 on magnesium alloys. Mater Corros 56:77–82
Hernández-Barrios CA, Duarte NZ, Hernández LM, Pena DY, Coy AE, Viejo F (2013) 2nd international meeting for researchers in materials and plasma technology. J Phys Conf Ser 466:012011
Venkatesh R, Ramanan SR (2000) Effects of organic additive on the properties of sol–gel spun micro alumina fibers. J Eur Ceram Soc 20:2543–2548
Saraswathi V, Rao GVR (1987) Structural evolution in alumina gel. J Mater Sci 22:2529–2534
Gallardo G, Duran A, Danberenea JJ (2004) Electrochemical and vitro behaviour of sol–gel coated 316 stainless steel. Corros Sci 46:795–806
Ruhi G, Modi OP, Sinha ASK, Singh IB (2008) Effect of sintering temperatures on corrosion and wear properties of sol–gel alumina coatings on surface pre-treated mild steel. Corros Sci 50:639–649
Meher T, Basu AK, Ghatak G (2005) Physicochemical characteristics of alumina gel in hydroxyhydrogel and normal form. Cer Int 31:831–838
Colomban P (1989) Structure of oxide gel and glasses by IR and Raman scattering: aluminas. J Mater Sci 24:3002–3010
Low M, Pherson RM (1989) Crystallization of gel derived by alumina and alumina–zirconia ceramics. J Mater Sci 24:892
Keddam M, Kurtz C, Takenouti H, Scuster D, Zuili D (1997) Exofoliation of corrosion of Al alloy examined by electrode impedance. Electrochim Acta 42:87–97
Peber N, Picaud T, Duprat M, Dabosi F (1989) Evaluation of corrosion performance of coated steel by the impedance technique. Corros Sci 29:1073–1079
Acknowledgments
Authors are thankful director, CSIR-AMPRI for providing laboratory facilities. They are also thankful to Mr. A. K. Khare for EDS analysis.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Singh, I.B., Gupta, P., Maheshwari, A. et al. Corrosion resistance of sol–gel alumina coated Mg metal in 3.5 % NaCl solution. J Sol-Gel Sci Technol 73, 127–132 (2015). https://doi.org/10.1007/s10971-014-3503-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10971-014-3503-5