Abstract
An environmental scanning electron microscope (ESEM) equipped with a hot stage was used to investigate how the anatomical features of spruce wood respond to heating in vacuum conditions. The ESEM allowed for continuously observing the swelling, shrinkage, and other deformations of certain anatomical elements during heating. Observations showed that, as the temperature increases, there is a slight initial swelling due to thermal expansion of wood and steam and gas release from the cell wall, up to a threshold of 90–100 °C. Subsequently, the size of the various anatomical elements remained stable up to 200 °C, after which the cell walls withdrew and deformed. There were few significant differences between earlywood and latewood, while the deformation of cell lumen was strongly influenced by the dimension and the arrangement of the walls that surrounded them. None of the observed cracks was directly attributable to the impact of increased heat. Nevertheless, existing intercellular spaces strongly increased in size, arriving to grow up to 300 % of the initial dimension. These results emphasize the importance of sound starting materials to avoid defects in the treated samples.
Similar content being viewed by others
References
Adewopo JB, Patterson DW (2011) Effects of heat treatment on the mechanical properties of Loblolly pine, Sweetgum, and Red Oak. For Prod J 61(7):526–535
Awoyemi L, Jones IP (2011) Anatomical explanations for the changes in properties of western red cedar (Thuja plicata) wood during heat treatment. Wood Sci Technol 45(2):261–267
Biziks V, Andersons B, BeĮkova Ļ, Kapača E, Militz H (2013) Changes in the microstructure of birch wood after hydrothermal treatment. Wood Sci Technol 47(4):717–735
Blechschmidt J, Engert P, Stephan M (1986) The glass transition of wood from the viewpoint of mechanical pulping. Wood Sci Technol 20(3):263–272
Boonstra MJ, Rijsdijk JF, Sander C, Kegel E, Tjeerdsma B, Militz H, van Acker J, Stevens M (2006a) Microstructural and physical aspects of heat treated wood. Part 1. Softwoods. Maderas Cienc Tecnol 8(3):193–208
Boonstra MJ, Rijsdijk JF, Sander C, Kegel E, Tjeerdsma B, Militz H, van Acker J, Stevens M (2006b) Microstructural and physical aspects of heat treated wood. Part 2. Hardwoods. Maderas Cienc Tecnol 8(3):209–217
Bourgois J, Guyonnet R (1988) Characterization and analysis of torrefied wood. Wood Sci Technol 22(2):143–155
Bryne LE, Lausmaa J, Ernstsson M, Englund F, Walinder MEP (2010) Ageing of modified wood. Part 2: determination of surface composition of acetylated, furfurylated, and thermally modified wood by XPS and ToF-SIMS. Holzforschung 64(3):305–313
Davis WH, Thompson WS (1964) Influence of thermal treatments of short duration on the toughness and chemical composition of wood. For Prod J 14(3):50–356
Esteves BM, Pereira HM (2009) Wood modification by heat treatment: a review. BioResources 4(1):370–404
Fengel D, Wegener G (1989) Wood: chemistry, ultrastructure, reactions. Walter de Gruyter, Berlin
Giebeler E (1983) Dimensional stabilization of wood by moisture-heat-pressure treatment. Holz Roh- Werkst 41(1):87–94
Kamdem DP, Pizzi A, Jermannaud A (2002) Durability of heat-treated wood. Holz Roh- Werkst 60(1):1–6
Kubojima Y, Okano T, Ohta M (2000) Bending strength and toughness of heat-treated wood. J Wood Sci 46(1):8–15
Mitsui K (2006) Changes in colour of spruce by repetitive treatment of light irradiation and heat treatment. Holz Roh- Werkst 64:243–244
Pelaez-Samaniegoa MR, Yadamac V, Garcia-Pereza M, Lowelle E, McDonald AG (2014) Effect of temperature during wood torrefaction on the formation of lignin liquid intermediates. J Anal Appl Pyrolysis 109:222–233
Sehlstedt-Persson M, Johansson D, Morén T (2006) Effect of heat treatment on the microstructure of pine, spruce and birch and the influence on capillary absorption. In: Proceedings of the 5th IUFRO symposium “wood structure and properties’06”, Sliač—Sielnica, Slovakia, Sept 3–6 2006, pp 251–255
Turkulin H, Holzer L, Richter K, Sell J (2005a) Application of the ESEM technique in wood research: part I. Optimization of imaging parameters and working conditions. Wood Fiber Sci 37(4):552–564
Turkulin H, Holzer L, Richter K, Sell J (2005b) Application of the ESEM technique in wood research. Part II. Comparison of operational modes. Wood Fiber Sci 37(4):565–573
Xie Y, Liu Y, Sun Y (2002) Heat-treated wood and its development in Europe. J For Res 13(3):224–230
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bernabei, M., Salvatici, M.C. In situ ESEM observations of spruce wood (Picea abies Karst.) during heat treatment. Wood Sci Technol 50, 715–726 (2016). https://doi.org/10.1007/s00226-016-0808-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00226-016-0808-2