Abstract
This paper presents the use of crude oil ash in asphalt flexible pavement and concrete rigid pavement. Conventional micro-size fly ash produced from burning crude oil in Jizan electrical power plant in Saudi Arabia was used in this study. The size of conventional crude oil ash waste reduced from micro-scale to nano-scale using ball-milling techniques. The first series of testing investigate the development of flexible pavement using asphalt bituminous AC60/70 incorporated conventional and nano-crude oil fly ash waste. The percentage of conventional and nano-ash used in asphalt mixes was varied from 0 to 15% of asphalt binder. The use of nano-fly ash increases the rutting factor by 0%, 33%, 61% and 38% at 0%, 5%, 10% and 15% nano-fly ash content, respectively. The nano-fly ash improves the rutting factors and bearing load capacity of flexible pavement mixes more than the control mix and mixes containing conventional micro-fly ash. The second series of testing investigates the use of nano-fly ash in rigid pavement asphalt concrete. Conventional and nano-fly ash replaced cement content in concrete material at 0%, 5%, 10%, and 15%. Concrete material incorporated nano-fly ash shows higher compressive strength and lower absorption compared to concrete control sample and concrete containing conventional micro-fly ash. The strength of concrete incorporated nano-fly ash increases by 14.8%, while absorption of concrete improves by 20.1% at 10% nano-fly ash content. The optimum nano-fly ash content was 10% to achieve the highest performance of both pavement materials. The use of nano-crude oil fly ash improves the performance of both pavement materials and helps in reducing the cost of repair in road and highway construction. Moreover, the use of nano-fly ash in paving materials can help in the recycling of this toxic waste to produce sustainable and environmentally friendly road construction materials.
Similar content being viewed by others
References
Abuaddous M, Dahim M, Ismail R, Taamneh M, Alomari AH, Darwish W, Al-Mattarneh H (2021) Sustainable asphalt concrete for road construction and building material. IOP Conf Ser Earth Environ Sci 801:012023
ACI Committee 211.1 (1991) Standard practice for selecting proportions for normal, heavyweight and mass concrete. Detroit, American Concrete Institute
Al-Akhras N, Abu-Alfoul B (2002) Effect of wheat straw ash on mechanical properties of autoclaved mortar. Cem Concr Res 32(6):859–869
Al-Mattarneh H, Dahim M (2019) Physical and mechanical properties of microwave absorber material containing micro and nano barium ferrite. Adv Mater Lett 10(4):259–262
Al-Osta MA, Baig MG, Al-Malack MH, Al-Amoudi OSB (2016) Study of heavy fuel oil fly ash for use in concrete blocks and asphalt concrete mixes. Adv Concr Constr 4(2):123–143. https://doi.org/10.12989/acc.2016.4.2.123
BS 1881: Part 102 (1983a) Method for determination of slump. British Standards Institution, Her Majesty Stationery Office, London
BS 1881: Part 111 (1983b) Method of normal curing of test specimen. British Standards Institution, Her Majesty Stationery Office, London
BS 1881: Part 116 (1983c) Method for determination of compressive strength of concrete cubes. British Standards Institution, Her Majesty Stationery Office, London
BS 1881: Part 122 (1983d) Method for determination of water absorption. British Standards Institution, Her Majesty Stationery Office, London
Chindaprasirt P, Chareerat T, Sirivivatnanon V (2007) Workability and strength of coarse high calcium fly ash geopolymer. Cem Concr Compos 29(3):224–229
Dahim M (2018a) Enhancement the performance of asphalt pavement using fly ash wastes in Saudi Arabia. Int J Eng Technol 7(3.32):50–53
Dahim M (2018b) The use of heavy oil fly ash as a filler in asphalt pavement mixture. In: International conference on urban transitions 2018, 25–27 Nov, Sitges, Barcelona, Spain
General Authority for Statistics (2016) Statistical year book 52, 2016 (1437H/1438H)
Hardjito D, Rangan BV (2005) Development and properties of low-calcium fly ash-based geopolymer concrete. Research Report GC1, Faculty of Engineering, Curtin University of Technology, Perth
Hoy M, Horpibulsuk S, Arulrajah A (2016) Strength development of recycled asphalt pavement fly ash geopolymer as a road construction material. Constr Build Mater 117(1):209–219
Jeffry SNA, Ramadhansyah PJ, Abdul Hassan N, Yaacob H, Mohd Satar MKI (2018) Mechanical performance of asphalt mixture containing nano-charcoal coconut shell ash. Constr Build Mater 173:40–48
Khana MN, Jamil M, Karimc M, Zain M (2014) Strength and durability of mortar and concrete containing rice husk ash: a review. World Appl Sci J 32(5):752–765
Laskar AI, Bhattacharjee R (2013) Effect of plasticizer and su-perplasticizer on rheology of fly-ash-based geopolyrner concrete. ACI Mater J 110(5):513–518
Leiva C, Vilches LF, Vale J, Fernández-Pereira C (2005) Influence of the type of ash on the fire resistance characteristics of ash-enriched mortars. Fuel 84:1433–1439
Ministry of Interior (2010) The statistical report for the year of 1431H. General Administration of Traffic, Kingdom of Saudi
Mosaberpanah MA, Umar SA (2020) Utilizing rice husk ash as supplement to cementitious materials on performance of ultra high performance concrete: a review. Mater Today Sustain 7–8:100030
Nisar MA, Zaidi SBA, Fareed A, Carvajal-Munoz JS, Ahmed I (2021) Performance evaluation of nano wood ashes in asphalt binder and mixture. Int J Pavement Eng. https://doi.org/10.1080/10298436.2021.1892107
Parvez MA, Al-Abdul Wahhab HI, Shawabkeh RA, Hussein IA (2014) Asphalt modification using acid treated waste oil fly ash. Constr Build Mater 70:201–209
Pasandín AR, Pérez I, Ramírez A, Cano MM (2016) Moisture damage resistance of hot-mix asphalt made with paper industry wastes as filler. J Clean Prod 112(1):853–862
Vieira AP, Toledo RD, Filho Tavares LM, Cordeiro GC (2020) Effect of particle size, porous structure and content of rice husk ash on the hydration process and compressive strength evolution of concrete. Constr Build Mater 236:117553
Wogan D, Pradhan S, Albardi S (2017) GCC energy system overview – 2017. King Abdullah Petroleum Studies and Research Center (KAPSARC), October 2017/KS-2017-MP04
World Bank (2016) World development indicators. Washington, DC. License: Creative Commons Attribution CC BY 3.0 IGO. https://doi.org/10.1596/978-1-4648-0163-1
Woszuk A, Bandura L, Franus W (2019) Fly ash as low cost and environmentally friendly filler and its effect on the properties of mix asphalt. J Clean Prod 235(20):493–502
Xiao F, Shivaprasad P, Amirkhanian S (2012) Low-volume road wma mixtures: moisture susceptibility of mixtures containing coal ash and roofing shingle with moist aggregate. J Mater Civ Eng 24(1):48–56
Zhang P, Sha D, Li Q, Zhao S, Ling Y (2021) Effect of nano silica particles on impact resistance and durability of concrete containing coal fly ash. Nanomaterials 11:1296. https://doi.org/10.3390/nano11051296
Zimmer FV (1970) Fly ash as bituminous filler. Washington (DC): United States Department of Interior, Bureau of Mines
Acknowledgements
The authors thank several universities for helping and allowing the researchers to use the lab facilities including King Khalid University, Jadara University, and Yarmouk University.
Funding
This research received no external funding.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that there is no conflict of interest regarding the publication of this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Dahim, M., Abuaddous, M., Al-Mattarneh, H. et al. Enhancement of road pavement material using conventional and nano-crude oil fly ash. Appl Nanosci 11, 2517–2524 (2021). https://doi.org/10.1007/s13204-021-02103-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13204-021-02103-z