Skip to main content
SpringerLink
Log in

Uniaxial Magnetic Pulse Tension of TiNi Alloy with Experimental Strain Rate Evaluation

  • Research paper
  • Published:
Experimental Mechanics Aims and scope Submit manuscript

Abstract

Background

Magnetic pulse methods are known since the 80 s and have become widespread for revealing the patterns of fracture processes. The magnetic pulse method can be modified for uniaxial high strain rate tension and be used to investigate the mechanical and functional properties of materials.

Objective

The paper shows capabilities of the magnetic pulse method modified for uniaxial high strain rate tension, the scheme of experimental estimation of strain accumulation time and reveals the influence on the basic functional properties of the TiNi shape memory alloy.

Method

The special shaped TiNi alloy specimens were deformed in tension mode using the modified magnetic pulse method. The one-way shape memory effects were measured and compared with ones after quasi-static tension. We used COMSOL Multiphysics to evaluate possible heating of the specimens during tests.

Results

The technique resulted in a wide range of plastic strain rates from 2000s−1 to 10000 s−1, depending on the specimen’s mass and residual strain. COMSOL Multiphysics simulation did not show the presence of induced currents or heating in the working parts of the specimens during the tests. The shape memory effect after magnetic pulse tension was lost compared to the shape memory effect after quasi-static deformation.

Conclusions

The method allows obtaining various strain rates at the same residual strains without changing in the loading system or dimensions of the working parts of the specimens. The shape memory effect depends on the time for pre-strain accumulation: the shorter the time, the less the shape memory effect upon subsequent heating.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  1. Yahia L (ed) (2000) Shape memory implants. Springer-Verlag, Berlin-Heidelberg-New York

  2. Petrini L, Migliavacca F (2011) Biomedical applications of shape memory alloys. J Metall Art 2011:501483

    Google Scholar 

  3. Khmelevskaya I, Ryklina E, Korotitskiy A (2015) Application of thermo-mechanically treated TiNi SMA. In: Resnina N, Rubanik V (eds) Shape memory alloys: Properties, technologies, opportunities. Trans Tech Publications Ltd., Pfaffikon, Switzerland, pp 603–637

    Google Scholar 

  4. Razov A, Cherniavsky A (2003) Application of SMAs in modern spacecraft and devices. J de Physique IV 112(10):1173–1176

    Google Scholar 

  5. Castellano MG, Indirli M, Martelli A (2001) Progress of application, research and development and design guidelines for shape memory alloy devices for cultural heritage structures in Italy. Proc SPIE 10(1117/12):434124

    Google Scholar 

  6. Wilson J, Wesolowsky M (2005) Shape memory alloys for seismic response modification: A state-of-the-art review. Earthq Spectra 21(2):569–601

    Article  Google Scholar 

  7. Hartl DJ, Lagoudas DC (2007) Aerospace applications of shape memory alloys. Proc Inst Mech Eng G J Aerosp Eng 221(4):535–552

    Article  Google Scholar 

  8. Ostropiko ES, Razov AI (2018) The influence of long-term storage on the functional properties of shape memory alloys. Exp Mech. https://doi.org/10.1007/s11340-018-0410-7

    Article  Google Scholar 

  9. Lin P, Tobushi H, Tanaka K, Hattori T, Ikai A (1996) Influence of strain rate on deformation properties of TiNi shape memory alloy. JSME Jp Soc Mech Eng Int J A 39(1):117–123

    Google Scholar 

  10. Liu Y, Li Y, Ramesh KT, Van Humbeeck J (1999) High strain rate deformation of martensitic NiTi shape memory alloy. Scr Mater 41(1):89–95

    Article  Google Scholar 

  11. Liu Y, Li Y, Hie Z, Ramesh KT (2002) Dynamic deformation of shape-memory alloys: evidence of domino detwinning? Phil Mag Lett 82(9):511–517

    Article  Google Scholar 

  12. Liu Y, Li Y, Ramesh KT (2002) Rate dependence of deformation mechanisms in a shape memory alloy. Phil Mag A Phys Cond Matt Defects Mech Prop 82(12):2461–2473

    Google Scholar 

  13. Belyaev S, Petrov A, Razov A, Volkov A (2004) Mechanical properties of titanium nickelide at high strain rate loading. Mat Sc Eng A 378:122–124

    Article  Google Scholar 

  14. Nemat-Nasser S, Choi J-Y, Guo W-G, Isaacs JB (2005) Very high strain-rate response of a NiTi shape-memory alloy. Mech Mater 37:287–298

    Article  Google Scholar 

  15. Nemat-Nasser S, Choi J-Y (2005) Strain rate dependence of deformation mechanisms in a Ni–Ti–Cr shape-memory alloy. Acta Mater 53:449–454

    Article  Google Scholar 

  16. Adharapurapu RR, Jiang F, Vecchio KS, Gray GT III (2006) Response of NiTi shape memory alloy at high strain rate: A systematic investigation of temperature effects on tension–compression asymmetry. Acta Mater 54:4609–4620

    Article  Google Scholar 

  17. Nemat-Nasser S, Choi J-Y (2006) Thermomechanical response of an Ni-Ti-Cr shape-memory alloy at low and high strain rates. Philos Mag 86(9):1173–1187

    Article  Google Scholar 

  18. Qiu Y, Young ML, Nie X (2015) Influence of dynamic compression on phase transformation of martensitic NiTi shape memory alloys. Metall Mater Trans 46(10):4661–4668

    Article  Google Scholar 

  19. Gruzdkov A, Krivosheev S, Petrov Yu et al (2008) Martensitic inelasticity of TiNi-shape memory alloy under pulsed loading. Mater Sci Eng A 481(1):105–108

    Article  Google Scholar 

  20. Grigorieva V, Danilov A, Razov A (2015) Thermo-mechanical properties of an NiTi-shape memory alloy after dynamic loading. Acta Phys Pol 128(4):592–596

    Article  Google Scholar 

  21. Jiang S-Y, Zhang Y-Q (2012) Microstructure evolution and deformation behavior of as-cast NiTi shape memory alloy under compression. Trans Nonferrous Met Soc China 22:90–96

    Article  Google Scholar 

  22. Jiang S-Y, Zhang Y-Q, Zhao Y-N et al (2013) Constitutive behavior of Ni-Ti shape memory alloy under hot compression. J Cent South Univ 20:24–29

    Article  Google Scholar 

  23. Bragov AM, Igumnov LA, Konstantinov AYu et al (2019) Dynamic research of shape memory alloys. Adv Struct Mater 103:133–146

    Article  Google Scholar 

  24. Qiu Y, Young ML, Nie X (2015) Influence of dynamic compression on phase transformation of martensitic NiTi shape memory alloys. Metall Mater Trans A 46:4661–4668

    Article  Google Scholar 

  25. Qiu Y, Young ML, Nie X (2017) High strain rate compression of martensitic NiTi shape memory alloy at different temperatures. Metall Mater Trans A 48:601–608

    Article  Google Scholar 

  26. Elibol C, Wagner MF-X (2015) Strain rate effects on the localization of the stress-induced martensitic transformation in pseudo-elastic NiTi under uniaxial tension, compression, and compression–shear. Mater Sci Eng A 643:194–202

    Article  Google Scholar 

  27. Huanga H, Durand B, Sun QP, Zhao H (2017) An experimental study of NiTi alloy under shear loading over a large range of strain rates. Int J Impact Eng 108:402–413

    Article  Google Scholar 

  28. Evard M, Motorin A, Razov A et al (2017) Microstructural modelling of TiNi alloy high strain rate tension. Mater Today Proc 4(3):4637–4641

    Article  Google Scholar 

  29. Yu H, Young ML (2018) Three-dimensional modelling for deformation of austenitic NiTi shape memory alloys under high strain rate. Smart Mater Struct 27(1):015031

    Article  Google Scholar 

  30. Likhachev VA, Patrikeev YuI (1990) Эффeкт пaмяти фopмы в никeлидe титaнa пocлe cтaтичecкoгo и yдapнoгo дeфopмиpoвaния [Shape memory effect in titanium nickelide after static and impact deformation]. In: Proceedings of XXIV conference "Actual problems of strength" devoted to "Strength of materials with new functional properties". Rubizhne, USSR, 17–21 Dec 1990, pp 128–129 (In Russian)

  31. Shi S-Q, Chen J-Y, Dong X-L et al (2001) Study on shape memory effect of TiNi alloy after impact deformation. Explos Shock Waves 21(3):168–172

    Google Scholar 

  32. Belyaev SP, Morozov NF, Razov AI et al (2002) Shape memory effect in titanium-nickel after preliminary dynamic deformation. Mater Sci Forum 394–395:337–340

    Article  Google Scholar 

  33. Bragov A, Galieva A, Grigorieva V et al (2013) Functional properties of TiNi shape memory alloy after high strain rate loading. Mater Sci Forum 738–739:326–331

    Article  Google Scholar 

  34. Bragov A, Danilov A, Konstantinov A et al (2015) Straining of metastable austenite as a way to improve NiTi alloy functional properties. Mater Today Proc 2(3):S961–S964

    Article  Google Scholar 

  35. Ostropiko E, Konstantinov AYu (2021) Functional behaviour of TiNi shape memory alloy after high strain rate deformation. Mater Sci Technol. https://doi.org/10.1080/02670836.2021.1958466

    Article  Google Scholar 

  36. Kolsky H (1949) An investigation of the mechanical properties of materials at very high rates of loading. Proc Phys Soc London Sect B. https://doi.org/10.1088/0370-1301/62/11/302

    Article  Google Scholar 

  37. Nicholas T (1981) Tensile testing of materials at high rates of strain. Exp Mech. https://doi.org/10.1007/BF02326644

    Article  Google Scholar 

  38. Chandar KR, Knauss WG (1982) Dynamic crack-tip stresses under stress wave loading – A comparison of theory and experiment. Int J Fract. https://doi.org/10.1007/BF01140336

    Article  Google Scholar 

  39. Magazinov SG, Krivosheev SI, Adamyan YE et al (2018) Adaptation of the magnetic pulse method for conductive materials testing. Mater Phys Mech. https://doi.org/10.18720/MPM.4012018_14

  40. Krivosheev SI, Magazinov SG (2016) Irreducible specific energy of new surfaces creation in materials with crack-type macro defects under pulse action. J Phys Conf Ser. https://doi.org/10.1088/1742-6596/774/1/012049

    Article  Google Scholar 

  41. Gruzdkov AA, Krivosheev SI, Petrov YuV (2003) The fracture energy of materials under pulse microsecond-scale loading. Phys Solid State 45(5):886–889

    Article  Google Scholar 

  42. Guo Y, Du B, Liu H, Ding Z, Zhao Z, Tang Z, Suo T, Li Y (2020) Electromagnetic Hopkinson bar: A powerful scientific instrument to study mechanical behavior of materials at high strain rates. Rev Sci Instrum 10(1063/5):0006084

    Google Scholar 

  43. Nie H, Suo T, Wu B, Li Y, Zhao H (2018) A versatile split Hopkinson pressure bar using electromagnetic loading. Int J Imp Eng. https://doi.org/10.1016/j.ijimpeng.2018.02.002

    Article  Google Scholar 

  44. Ostropiko E, Krivosheev S, Magazinov S (2021) Uniaxial high strain rate tension of a TiNi alloy provided by the magnetic pulse method. Appl Phys A. https://doi.org/10.1007/s00339-020-04160-7

    Article  Google Scholar 

  45. Atroshenko S, Morozov V, Gribanov D et al (2015) Behavior of metals induced by magnetic pulse loading. EPJ Web Conf. https://doi.org/10.1051/epjconf/20159402014

    Article  Google Scholar 

  46. Zhang H, Ravi-Chandar K (2006) On the dynamics of necking and fragmentation – I. Real-time and post-mortem observations in Al 6061-O. Int J Fract. https://doi.org/10.1007/s10704-006-9024-7

  47. Krivosheev SI, Magazinov SG, Alekseev DI (2018) The peculiarities of the application of magnetic-pulse method for forming controlled pressure pulses to test metal samples. IEEE Trans Plasma Sci 46(4):1054–1057

    Article  Google Scholar 

  48. Krivosheev SI (1999) Physical constraint to super strong magnetic fields by a method of direct discharge. IEEE Int Pulsed Power Conf 2:750–753

    Article  Google Scholar 

  49. Kanel GI, Razorenov SV, Garkushin GB, Savinykh AS (2018) New data on the kinetics and governing factors of the spall fracture of metals. J Phys Conf Ser. https://doi.org/10.1088/1742-6596/946/1/012039

    Article  Google Scholar 

  50. Meshcheryakov Y, Divakov A, Zhigacheva N, Konovalov G (2014) Deformation and fracture mechanisms and structural changes in coarse-grained copper under shock-wave loading. J Appl Mech Tech Phys. https://doi.org/10.1134/S0021894414050198

    Article  Google Scholar 

  51. Meshcheryakov Y, Divakov A, Zhigacheva N, Konovalov G (2016) Shock-induced structural instability and dynamic strength of brittle solids. Proc Struct Int. https://doi.org/10.1016/j.prostr.2016.06.062

    Article  Google Scholar 

  52. Knoepfel H (1970) Pulsed high magnetic fields: Physical effects and generation methods concerning pulsed fields up to the mega oersted level. North Holland Publishing Company

    Google Scholar 

  53. Ostropiko E, Krivosheev S, Magazinov S (2021) Analytical evaluation of magnetic pulse deformation of TiNi alloy. Let Mat. https://doi.org/10.22226/2410-3535-2021-1-55-60

  54. Belyaev S, Resnina N, Rakhimov T, Andreev V (2020) Martensite stabilization effect in Ni-rich NiTi shape memory alloy with different structure and martensitic transformations. Sens Act A Phys. https://doi.org/10.1016/j.sna.2020.111911

    Article  Google Scholar 

  55. Belyaev S, Resnina N, Ivanova A et al (2020) Martensite stabilization effect in the Ni50Ti50 alloy after preliminary deformation by cooling under constant stress. Shape Mem Superelasticity. https://doi.org/10.1007/s40830-020-00282-2

    Article  Google Scholar 

Download references

Acknowledgements

COMSOL simulation was performed using the computational resources of Peter the Great Saint-Petersburg Polytechnic University Supercomputing Center. The authors are grateful for support under the strategic academic leadership program 'Priority 2030' of the Russian Federation (Agreement 075-15-2021-1333 dated 30.09.2021). The authors are grateful to Professor Alexander Razov for discussions and consultations.

Funding

The reported study was funded by RFBR, project number 19–32-60035.

Author information

Authors and Affiliations

  1. Peter the Great St. Petersburg Polytechnic University, Polytechnicheskaya 29, St. Petersburg, 195251, Russian Federation

    E. Ostropiko, S. Magazinov & S. Krivosheev

Authors
  1. E. Ostropiko
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. Magazinov
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. Krivosheev
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to E. Ostropiko.

Ethics declarations

Conflict of Interests

The authors declare that they have no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ostropiko, E., Magazinov, S. & Krivosheev, S. Uniaxial Magnetic Pulse Tension of TiNi Alloy with Experimental Strain Rate Evaluation. Exp Mech 62, 1027–1036 (2022). https://doi.org/10.1007/s11340-022-00864-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11340-022-00864-4

Keywords

Search

Navigation