Abstract
Nanocellulose-borax-polyvinyl alcohol (PVA) hybrid foams were prepared using a facile approach in an aqueous medium followed by a freeze-casting technique. Nanocellulose was well-dispersed in the PVA-borax (PB) matrix and acted as a cross-linking agent and nanofiller to bridge the 3D network, leading to enhanced mechanical and thermal performance. The effects of particle size, aspect ratio, surface charge and crystallinity on the microstructure and performance were investigated. With the increasing size and aspect ratio, cellulose nanofiber-PB foam with a density of ~0.110 g/cm3 exhibited the most pronounced honeycomb-like structure with a porosity of 92.2%, the smallest cell diameter (~0.93 μm) and the highest mechanical strength (bearing more than 7560 times its own weight). Chemical cross-linking of nanocellulose-PVA foams with borax led to uniform porous structure, small pores and high mechanical strength. Possible lyophilization-induced assembly mechanisms, relationships between microstructure and mechanical properties, and complexation reactions between building blocks are proposed.
Similar content being viewed by others
References
Bryning MB, Milkie DE, Islam MF, Hough LA, Kikkawa JM, Yodh AG (2007) Carbon nanotube aerogels. Adv Mater 19:661–664. doi:10.1002/adma.200601748
Cai HL, Sharma S, Liu WY, Mu W, Liu W, Zhang XD, Deng YL (2014) Aerogel microspheres from natural cellulose nanofibrils and their application as cell culture scaffold. Biomacromol 15:2540–2547. doi:10.1021/bm5003976
Cervin NT, Andersson L, Ng JBS, Olin P, Bergstrom L, Wagberg L (2013) Lightweight and strong cellulose materials made from aqueous foams stabilized by nanofibrillated cellulose. Biomacromol 14:503–511. doi:10.1021/bm301755u
Chen HB, Wang YZ, Sanchez-Soto M, Schiraldi DA (2012) Low flammability, foam-like materials based on ammonium alginate and sodium montmorillonite clay. Polymer 53:5825–5831. doi:10.1016/j.polymer.2012.10.029
Darder M, Aranda P, Ferrer ML, Gutierrez MC, del Monte F, Ruiz-Hitzky E (2011) Progress in bionanocomposite and bioinspired foams. Adv Mater 23:5262–5267. doi:10.1002/adma.201101617
Dash R, Li Y, Ragauskas AJ (2012) Cellulose nanowhisker foams by freeze casting. Carbohyd Polym 88:789–792. doi:10.1016/j.carbpol.2011.12.035
Deville S, Saiz E, Nalla RK, Tomsia AP (2006) Freezing as a path to build complex composites. Science 311:515–518. doi:10.1126/science.1120937
Gao SJ, Guo JM, Nishinari K (2008) Thermoreversible konjac glucomannan gel crosslinked by borax. Carbohyd Polym 72:315–325. doi:10.1016/j.carbpol.2007.08.015
Gutierrez MC et al (2007) Poly(vinyl alcohol) scaffolds with tailored morphologies for drug delivery and controlled release. Adv Funct Mater 17:3505–3513. doi:10.1002/adfm.200700093
Gutierrez MC, Ferrer ML, del Monte F (2008) Ice-templated materials: sophisticated structures exhibiting enhanced functionalities obtained after unidirectional freezing and ice-segregation-induced self-assembly. Chem Mater 20:634–648. doi:10.1021/cm702028z
Han J, Zhou C, French AD, Han G, Wu Q (2013a) Characterization of cellulose II nanoparticles regenerated from 1-butyl-3-methylimidazolium chloride. Carbohydr Polym 94:773–781. doi:10.1016/j.carbpol.2013.02.003
Han J, Zhou C, Wu Y, Liu F, Wu Q (2013b) Self-assembling behavior of cellulose nanoparticles during freeze-drying: effect of suspension concentration, particle size, crystal structure, and surface charge. Biomacromol 14:1529–1540. doi:10.1021/bm4001734
Han JQ, Lei TZ, Wu QL (2013c) Facile preparation of mouldable polyvinyl alcohol-borax hydrogels reinforced by well-dispersed cellulose nanoparticles: physical, viscoelastic and mechanical properties. Cellulose 20:2947–2958. doi:10.1007/s10570-013-0082-5
Han J, Lei T, Wu Q (2014) High-water-content mouldable polyvinyl alcohol-borax hydrogels reinforced by well-dispersed cellulose nanoparticles: dynamic rheological properties and hydrogel formation mechanism. Carbohydr Polym 102:306–316. doi:10.1016/j.carbpol.2013.11.045
Heath L, Zhu L, Thielemans W (2013) Chitin nanowhisker aerogels. Chemsuschem 6:537–544. doi:10.1002/cssc.201200717
Hu H, Zhao Z, Wan W, Gogotsi Y, Qiu J (2013) Ultralight and highly compressible graphene aerogels. Adv Mater 25:2219–2223. doi:10.1002/adma.201204530
Huang T, Xu HG, Jiao KX, Zhu LP, Brown HR, Wang HL (2007) A novel hydrogel with high mechanical strength: a macromolecular microsphere composite hydrogel. Adv Mater 19:1622. doi:10.1002/adma.200602533
Javadi A et al (2013) Polyvinyl alcohol-cellulose nanofibrils-graphene oxide hybrid organic aerogels. ACS Appl Mater Interfaces 5:5969–5975. doi:10.1021/am400171y
Köhnke T, Lin A, Elder T, Theliander H, Ragauskas AJ (2012) Nanoreinforced xylan–cellulose composite foams by freeze-casting. Green Chem 14:1864–1869. doi:10.1039/C2GC35413F
Kumar A et al (2017) Effect of crosslinking functionality on microstructure, mechanical properties, and in vitro cytocompatibility of cellulose nanocrystals reinforced poly (vinyl alcohol)/sodium alginate hybrid scaffolds. Int J Biol Macromol 95:962–973. doi:10.1016/j.ijbiomac.2016.10.085
Liu D, Ma Z, Wang Z, Tian H, Gu M (2014) Biodegradable poly(vinyl alcohol) foams supported by cellulose nanofibrils: processing, structure, and properties. Langmuir 30:9544–9550. doi:10.1021/la502723d
Luo J et al (2011) Compression and aggregation-resistant particles of crumpled soft sheets. ACS Nano 5:8943–8949. doi:10.1021/nn203115u
Manna U, Patil S (2009) Borax mediated layer-by-layer self-assembly of neutral poly(vinyl alcohol) and chitosan. J Phys Chem B 113:9137–9142. doi:10.1021/jp9025333
Miao XR, Tian F, Lin JY, Li H, Li XH, Bian FG, Zhang XZ (2016) Tuning the mechanical properties of cellulose nanofibrils reinforced polyvinyl alcohol composites via altering the cellulose polymorphs. RSC Adv 6:83356–83365. doi:10.1039/c6ra14517e
Nishino T, Takano K, Nakamae K (1995) Elastic modulus of the crystalline regions of cellulose polymorphs. J Polym Sci, Part B: Polym Phys 33:1647–1651. doi:10.1002/polb.1995.090331110
Olsson RT et al (2010) Making flexible magnetic aerogels and stiff magnetic nanopaper using cellulose nanofibrils as templates. Nat Nanotechnol 5:584–588. doi:10.1038/Nnano.2010.155
Pang X, He Y, Jung J, Lin Z (2016) 1D nanocrystals with precisely controlled dimensions, compositions, and architectures. Science 353:1268–1272. doi:10.1126/science.aad8279
Peresin MS, Habibi Y, Zoppe JO, Pawlak JJ, Rojas OJ (2010) Nanofiber composites of polyvinyl alcohol and cellulose nanocrystals: manufacture and characterization. Biomacromol 11:674–681. doi:10.1021/bm901254n
Qiu L, Liu JZ, Chang SL, Wu Y, Li D (2012) Biomimetic superelastic graphene-based cellular monoliths. Nat Commun 3:1241. doi:10.1038/ncomms2251
Sehaqui H, Salajkova M, Zhou Q, Berglund LA (2010) Mechanical performance tailoring of tough ultra-high porosity foams prepared from cellulose I nanofiber suspensions. Soft Matter 6:1824–1832. doi:10.1039/b927505c
Spoljaric S, Salminen A, Luong ND, Seppala J (2014) Stable, self-healing hydrogels from nanofibrillated cellulose, poly(vinyl alcohol) and borax via reversible crosslinking. Eur Polym J 56:105–117. doi:10.1016/j.eurpolymj.2014.03.009
Svagan AJ, Samir MASA, Berglund LA (2008) Biomimetic foams of high mechanical performance based on nanostructured cell walls reinforced by native cellulose nanofibrils. Adv Mater 20:1263. doi:10.1002/adma.200701215
Svagan AJ, Berglund LA, Jensen P (2011) Cellulose nanocomposite biopolymer foam—hierarchical structure effects on energy absorption. ACS Appl Mater Interfaces 3:1411–1417. doi:10.1021/am200183u
Taleb MFA, El-Mohdy HA, El-Rehim HA (2009) Radiation preparation of PVA/CMC copolymers and their application in removal of dyes. J Hazard Mater 168:68–75. doi:10.1016/j.jhazmat.2009.02.001
Tan CB, Fung BM, Newman JK, Vu C (2001) Organic aerogels with very high impact strength. Adv Mater 13:644–646. doi:10.1002/1521-4095(200105)13
Wang YX, Chen LY (2011) Impacts of nanowhisker on formation kinetics and properties of all-cellulose composite gels. Carbohyd Polym 83:1937–1946. doi:10.1016/j.carbpol.2010.10.071
Wang M et al (2013) Modifying native nanocellulose aerogels with carbon nanotubes for mechanoresponsive conductivity and pressure sensing. Adv Mater 25:2428–2432. doi:10.1002/adma.201300256
Wehner M, Truby RL, Fitzgerald DJ, Mosadegh B, Whitesides GM, Lewis JA, Wood RJ (2016) An integrated design and fabrication strategy for entirely soft, autonomous robots. Nature 536:451–455. doi:10.1038/nature19100
Wu J, Meredith JC (2014) Assembly of chitin nanofibers into porous biomimetic structures via freeze drying. ACS Macro Lett 3:185–190. doi:10.1021/mz400543f
Wu YT, Zhou Z, Fan QQ, Chen L, Zhu MF (2009) Facile in situ fabrication of novel organic nanoparticle hydrogels with excellent mechanical properties. J Mater Chem 19:7340–7346. doi:10.1039/b909125d
Yang X, Cranston ED (2014) Chemically cross-linked cellulose nanocrystal aerogels with shape recovery and superabsorbent properties. Chem Mater 26:6016–6025. doi:10.1021/cm502873c
Yang J, Han C-R, Duan J-F, Ma M-G, Zhang X-M, Xu F, Sun R-C (2013) Synthesis and characterization of mechanically flexible and tough cellulose nanocrystals–polyacrylamide nanocomposite hydrogels. Cellulose 20:227–237. doi:10.1007/s10570-012-9841-y
Yue YY, Zhou CJ, French AD, Xia G, Han GP, Wang QW, Wu QL (2012) Comparative properties of cellulose nano-crystals from native and mercerized cotton fibers. Cellulose 19:1173–1187. doi:10.1007/s10570-012-9714-4
Zhang H, Hussain I, Brust M, Butler MF, Rannard SP, Cooper AI (2005) Aligned two- and three-dimensional structures by directional freezing of polymers and nanoparticles. Nat Mater 4:787–793. doi:10.1038/nmat1487
Zhang L, Zhao J, Zhu JT, He CC, Wang HL (2012) Anisotropic tough poly(vinyl alcohol) hydrogels. Soft Matter 8:10439–10447. doi:10.1039/c2sm26102b
Zheng Q, Javadi A, Sabo R, Cai Z, Gong S (2013) Polyvinyl alcohol (PVA)–cellulose nanofibril (CNF)-multiwalled carbon nanotube (MWCNT) hybrid organic aerogels with superior mechanical properties. RSC Adv 3:20816–20823. doi:10.1039/C3RA42321B
Zheng Q, Cai Z, Gong S (2014) Green synthesis of polyvinyl alcohol (PVA)–cellulose nanofibril (CNF) hybrid aerogels and their use as superabsorbents. J Mater Chem A 2:3110–3118. doi:10.1039/c3ta14642a
Zu Y et al (2012) Preparation and characterization of chitosan–polyvinyl alcohol blend hydrogels for the controlled release of nano-insulin. Int J Biol Macromol 50:82–87. doi:10.1016/j.ijbiomac.2011.10.006
Acknowledgments
This work was supported by National Natural Science Foundation of China (31400505), Natural Science Foundation of Jiangsu Province (BK20140975), Natural Science Research Project of Jiangsu Province (14KJB220004), Ninth China Special Postdoctoral Science Foundation (2016T90466), China Postdoctoral Science Foundation (2015M580437), Postdoctoral Scientific Research Grant Program of Jiangsu Province (1501050A), Qing Lan Project of Jiangsu Province (2016), 333 Project of Jiangsu Province (2016), Jiangsu Department of Education, China (13KJA220003), Scientific Research Foundation for High-level Talents, Nanjing Forestry University (GXL2014034), Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD), and Analysis and Test Center of Nanjing Forestry University.
Author contributions
The manuscript was written through contributions of all authors. All authors have given approval to the final version of the manuscript.
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Han, J., Yue, Y., Wu, Q. et al. Effects of nanocellulose on the structure and properties of poly(vinyl alcohol)-borax hybrid foams. Cellulose 24, 4433–4448 (2017). https://doi.org/10.1007/s10570-017-1409-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-017-1409-4