Abstract
Plastic materials are often used in many aspects of our lives. Currently, most of them do not degrade, causing serious environmental problems. (Bio)degradable polymers, a unique category of materials, can help to solve the growing environmental concern. Environmentally friendly polymer nanocomposites are the next generation of sustainable, recyclable, and eco-friendly materials that combine performance and environmental compatibility. Morphological and structural transformations resulting from the degradation of the material have a significant impact on the properties of the polymer materials used in various applications; therefore it is important to increase the applicability of polymers while minimizing the potential failure caused by degradation during use. Over the last few years, there has been a significant progress in the range of polymer composites both commercially available and under development. Nanotechnology offers new opportunities to improve the performance of polymers, enabling the development of new polymeric materials with improved mechanical, thermal, electrical, and other properties. Using different polymer matrices and nanofillers and/or additives can prepare many different nanocomposites with tailor-made properties.
This review focused on (bio)degradable polymer nanocomposites with approved or potential applications in the fields of environmental protection. It covers a wide range of research on polymer-based nanocomposites, their design, synthesis, characterization, applications, and degradation as well as future trends.
References
Adeosun SO, Lawal GI, Balogun SA et al (2012) Review of green polymer nanocomposites. J Miner Mater Charact Eng 11(4):385–416. https://doi.org/10.4236/jmmce.2012.114028
Akpan EI, Shen X, Wetzel B, Friedrich K (2019) Design and synthesis of polymer nanocomposites. In: Pielichowski K, Majka TM (eds) Polymer composites with functionalized nanoparticles, synthesis, properties, and applications. A volume in micro and nano technologies. Elsevier, Amsterdam, pp 47–83. https://doi.org/10.1016/C2017-0-00517-7
Alexandre M, Dubois P (2000) Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater Sci Eng 28(1–2):1–63. https://doi.org/10.1016/S0927-796X(00)00012-7
Allaoui A, Bai S, Cheng HM et al (2002) Mechanical and electrical properties of a MWNT/epoxy composite. Compos Sci Technol 62(15):1993–1998. https://doi.org/10.1016/S0266-3538(02)00129-X
Al-Saleh MH, Sundararaj U (2011) Review of the mechanical properties of carbon nanofiber/polymer composites. Compos Part A 42:2126–2142. https://doi.org/10.1016/j.compositesa.2011.08.005
Ambika PPS (2018) Nanotechnology: greener approach for sustainable environment. In: Hussain CM, Mishra AK (eds) Nanotechnology in environmental science. Wiley-VCH Verlag, Weinheim. https://doi.org/10.1002/9783527808854.ch25
Anandhan S, Bandyopadhyay S (2011) Polymer nanocomposites: from synthesis to applications. In: Cuppoletti J (ed) Nanocomposites and polymers with analytical methods. IntechOpen, Rijeka, pp 3–28. https://doi.org/10.5772/17039
Armentano I, Puglia D, Luzi F et al (2018) Nanocomposites based on biodegradable polymers. Materials 11(5):795. https://doi.org/10.3390/ma11050795
Arora B, Bhatia R, Attri P (2018) Bionanocomposites: green materials for a sustainable future. In: Hussain CM, Mishra AK (eds) New polymer nanocomposites for environmental remediation. Elsevier, pp 699–712. https://doi.org/10.1016/B978-0-12-811033-1.00027-5
Assouline E, Pohl S, Fulchiron R et al (2000) The kinetics of α and β transcrystallization in fibre-reinforced polypropylene. Polymer 41(21):7843–7854. https://doi.org/10.1016/S0032-3861(00)00113-0
Avella M, De Vlieger JJ, Errico ME et al (2005) Biodegradable stach/clay nanocomposite films for food packaging applications. Food Chem 93(3):467–474. https://doi.org/10.1016/j.foodchem.2004.10.024
Azeredo HMC, Mattoso LHC, Bustillos RJA et al (2009) Nanocellulose reinforced chitosan composite films as affected by nanofiller loading and plasticizer content. J Food Sci 75(1):1–7. https://doi.org/10.1111/j.1750-3841.2009.01386.x
Battista OA, Erdi NZ, Ferraro CF, Karasinski FJ (1967) Colloidal macromolecular phenomena. Part II. Novel microcrystals of polymers. J Appl Polym Sci 11(4):481–498. https://doi.org/10.1002/app.1967.070110401
Biopolymers with advanced functionalities for high performance applications. http://ec.europa.eu/research/participants/portal/desktop/en/opportunities/h2020/topics/bbi-2016-r07.html. Accessed 10 Apr 2019
Cabedo L, Feijoo JL, Villanueva MP et al (2006) Optimization of biodegradable nanocomposites based on aPLA/PCL blends for food packaging application. Macromol Symp 233(1):191–197. https://doi.org/10.1002/masy.200690017
Correa AC, Teixeira EM, Pessan LA et al (2010) Cellulose nanofibers from curaua fibers. Cellulose 17(6):1183–1192. https://doi.org/10.1007/s10570-010-9453-3
Corrêa MCS, Branciforti MC, Pollet EJ et al (2012) Elaboration and characterization of nano-biocomposites based on plasticized poly(hydroxybutyrate-co-hydroxyvalerate) with organo-modified montmorillonite. J Polym Environ 20(2):283–290. https://doi.org/10.1007/s10924-011-0379-0
Cury Camargo PH, Gundappa Satyanarayana K, Wypych F (2009) Nanocomposites: synthesis, structure, properties and new application opportunities. Mater Res 12(1):1–39. https://doi.org/10.1590/S1516-14392009000100002
Dadashi S, Mousavi SM, Emam-Djomeh Z et al (2014) Functional properties of biodegradable nanocomposites from poly(lactic acid) (PLA). Int J Nanosci Nanotechnol 10(4):245–256
De Campos A, de Sena Neto AR, Rodrigues VB et al (2017) Bionanocomposites produced from cassava starch and oil palm mesocarp cellulose nanowhiskers. Carbohydr Polym 175:330–336. https://doi.org/10.1016/j.carbpol.2017.07.080
Dias RCM, Goes AM, Serakides R et al (2010) Porous biodegradable polyurethane nanocomposites: preparation, characterization and biocompatibility test. Mater Res 13(2):211–218. https://doi.org/10.1590/S1516-14392010000200015
Dinca I, Ban C, Stefan A et al (2012) Nanocomposites as advanced materials for aerospace industry. INCAS Bull 4(4):73–83. https://doi.org/10.13111/2066-8201.2012.4.4.6
Eichhorn SJ, Dufresene A, Aranguren Ms T (2010) Review: current international research into cellulose nanofibres and nanocomposites. J Mater Sci 45:1–33. https://doi.org/10.1007/s10853-009-3874-0
Elsevier HTTP. Polymer nanocomposites. https://www.sciencedirect.com/topics/materials-science/polymer-nanocomposites. Accessed 03 Dec 2018
Feller J-F, Kumar B, Castro M (2011) Conductive biopolymer nanocomposites for sensors. In: Mittal V (ed) Nanocomposites with biodegradable polymers: synthesis, properties, and future perspectives. Oxford University Press, Oxford. https://doi.org/10.1093/acprof:oso/9780199581924.003.0015
Finegan IC, Tibbetts GG, Gibson RF (2003) Modeling and characterization of damping in carbon nanofiber/polypropylene composites. Compos Sci Technol 63(11):1629–1635. https://doi.org/10.1016/S0266-3538(03)00054-X
Fukushima K, Abbate C, Tabuani D et al (2009) Biodegradation of poly(lactic acid) and its nanocomposites. Polym Degrad Stab 94(10):1646–1655. https://doi.org/10.1016/j.polymdegradstab.2009.07.001
Garcés JM, Moll DJ, Bicerano J et al (2000) Polymeric nanocomposites for automotive applications. Adv Mater 12(23):1835–1839. https://doi.org/10.1002/1521-4095(200012)12:23<1835::AID-ADMA1835>3.0.CO;2-T
Geim AK (2009) Graphene: status and prospects. Science 324(5934):1530–1534. https://doi.org/10.1126/science.1158877
Glasser WG, Taib R, Jain RK et al (1999) Fiber-reinforced cellulosic thermoplastic composites. J Appl Polym Sci 73(7):1329–1340. https://doi.org/10.1002/(SICI)1097-4628(19990815)73:7<1329::AID-APP26>3.0.CO;2-Q
Hergeth WD, Steinau UJ, Bittrich HJ, Simon G, Schmutzler K (1989) Polymerization in the presence of seeds. Part IV: Emulsion polymers containing inorganic filler particles. Polymer 30(2):254–258. https://doi.org/10.1016/0032-3861(89)90114-6
Huang M, Yu J, Ma X (2006) High mechanical performance MMT-urea and formamide-plasticized thermoplastic cornstarch biodegradable nanocomposites. Carbohydr Polym 63(3):393–399. https://doi.org/10.1016/j.carbpol.2005.09.006
Huang P, Wu M, Kuga S et al (2012a) One-step dispersion of cellulose nanofibers by mechano-chemical estrification in an organic solvent. ChemSusChem 5(12):2319–2322. https://doi.org/10.1002/cssc.201200492
Huang T-C, Yeh J-M, Lai C-Y (2012b) Polymer nanocomposite coatings. In: Gao F (ed) Advances in polymer nanocomposites, types and applications. Woodhead Publishing, Philadelphia, pp 605–638. https://doi.org/10.1533/9780857096241.3.605
Huang P, Zhao Y, Kuga S et al (2016) A versatile method for producing functionalized cellolose nanofibers and their application. Nanoscale 8:3753–3759. https://doi.org/10.1039/c5nr08179c
Hung W-I, Chang K-C, Chang Y-H et al (2011) Advanced anticorrosive coatings prepared from polymer-clay nanocomposite materials. In: Reddy B (ed) Advances in nanocomposites – Synthesis, characterization and industrial applications. InTech, Rijeka, pp 561–582. https://doi.org/10.5772/15355
Ifuku S (2014) Chitin and chitosan nanofibers: preparation and chemical modifications. Molecules 19(11):18367–18380. https://doi.org/10.3390/molecules191118367
Ifuku S, Saimoto H (2012) Chitin nanofibers: preparations, modifications and applications. Nanoscale 4(11):3308–3318. https://doi.org/10.1039/C2NR30383C
Iijima S (1991) Helical microtubules of graphitic carbon. Nature 354:56–58. https://doi.org/10.1038/354056a0
Ioelovich M, Figovsky O (2013) Green nano-protective coating. SITA J 15(2):63–67
Katheria AD, Singh E, Kumar R et al (2016) Polymer nanocomposite: an overview. Int J Innov Res Sci Eng Technol 5(2):1960–1968. https://doi.org/10.15680/IJIRSET.2016.0502142
Keshk SMAS (2014) Bacterial cellulose production and its industrial production. J Bioprocess Biotech 4(2):150. https://doi.org/10.4172/2155-9821.1000150
Kim B, Kim GH, Lee MH et al (2015) Application of biodegradable polymer to construction materials. Int J Eng Innov Technol 4(9):1–7
Klemm D, Heublein B, Fink HP et al (2005) Cellulose: fascinating biopolymer and sustainable raw material. Angew Chem Int Ed 44:3358–3393. https://doi.org/10.1002/anie.200460587
Królikowski W, Rosłaniec Z (2004) Polymer nanocomposites. Kompozyty (Composites) 4:1–15
Kumar AP, Depan D, Tomer NS et al (2009) Nanoscale particles for polymer degradation and stabilization: trends and future perspectives. Prog Polym Sci 34(6):479–515. https://doi.org/10.1016/j.progpolymsci.2009.01.002
Kumar S, Raj S, Jain S, Chatterje K (2016) Multifunctional biodegradable polymer nanocomposite incorporating graphene-silver hybrid for biomedical applications. Mater Des 108(C):319–332. https://doi.org/10.1016/j.matdes.2016.06.107
Lee SR, Park HM, Lim H et al (2002) Microstructure, tensile properties, and biodegradability of aliphatic polyester/clay nanocomposites. Polymer 43(8):2495–2500. https://doi.org/10.1016/S0032-3861(02)00012-5
Lim ST, Hyun YH, Choi HJ et al (2002) Synthetic biodegradable aliphatic polyester/montmorillonite nanocomposites. Chem Mater 14(4):1839–1844. https://doi.org/10.1021/cm010377j
Mago G, Sinha Ray S, Shofner ML et al (2014) Polymer nanocomposite processing, characterization and applications 2013. J Nanomater 2014:403492. https://doi.org/10.1155/2014/403492
Maiti P, Batt CA, Giannelis EP (2003) Renewable plastics: synthesis and properties of PHB nanocomposites. Polym Mater Sci Eng 88:58–59
Maiti P, Batt CA, Giannelis EP (2007) New biodegradable polyhydroxybutyrate/layered silicate nanocomposites. Biomacromolecules 8(11):3393–3400. https://doi.org/10.1021/bm700500t
Mattsson J, Forrest JA, Börjesson L (2000) Quantifying glass transition behavior in ultrathin free-standing polymer films. Phys Rev E 62(4):5187–5200. https://doi.org/10.1103/PhysRevE.62.5187
Mina MF, Beg MDH, Islam MR et al (2013) Characterization of biodegradable nanocomposites with poly(lactic acid) and multi-walled carbon nanotubes. Int Sch Sci Res Innov 7(1):74–79. https://doi.org/10.5281/zenodo.1081613
Mohanty S, Nayak SK (2012) Biodegradable nanocomposites of poly(butylene adipate-co-terephtalate) (PBAT) and organically modified layered silicates. J Polym Environ 20(1):195–207. https://doi.org/10.1007/s10924-011-0408-z
Morgan AB (2007) Polymer-clay nanocomposites: design and application of multi-functional materials. Mater Matt 2(1):20–23
Müller K, Bugnicourt E, Latorre M et al (2017) Review on the processing and properties of polymer nanocomposites and nanocoatings and their applications in the packaging, automotive and solar energy fields. Nano 7(4):E74. https://doi.org/10.3390/nano7040074
Nanda A, DuttaGupta M, Banthia AK (2002) Sulfonated polybutadiene ionomer templates nanonickel composite. Mater Lett 52(3):203–205. https://doi.org/10.1016/S0167-577X(01)00394-9
Njuguna J, Pielichowski K, Desai S (2008) Nanofiller-reinforced polymer nanocomposites. Polym Adv Technol 19(8):947–959. https://doi.org/10.1002/pat.1074
Njuguna J, Pielichowski K, Fan J (2012) Polymer nanocomposites for aerospace applications. In: Gao F (ed) Advances in polymer nanocomposites, types and applications. Woodhead Publishing, Philadelphia, pp 472–539. https://doi.org/10.1533/9780857096241.3.472
Nobuta K, Teramura H, Ito H et al (2016) Characterization of cellulose nanofibers sheets from different refining process. Cellulose 23(1):403–414. https://doi.org/10.1007/s10570-015-0792-y
Okamoto K, Ray SS, Okamoto M (2003) New poly(butylene succinate)/layered silicate nanocomposites. 2. Effect of organically modified layered silicates on morphology, materials properties, melt rheology, and biodegradability. J Polym Sci Part B Polym Phys 41(24):3160–3170. https://doi.org/10.1002/polb.10708
Oliveira M, Machado AV (2013) Preparation of polymer-based nanocomposites by different routes, preparation of polymer-based nanocomposites by different routes. In: Xiaoing W (ed) Nanocomposites: synthesis, characterization and applications. NOVA Science Publishers, Haupaggue, p 21
Ollier RP, Lanfranconi MR, Alvarez VA et al (2018) Polycaprolactone/organoclay biodegradable nanocomposites: dissimilar tendencies of different clay modifiers. Adv Mater Lett 9(11):796–804. https://doi.org/10.5185/amlett.2018.1828
Orts WJ, Shey J, Imam SH et al (2005) Application of cellulose microfibrils in polymer nanocomposites. J Polym Environ 13(4):301–306. https://doi.org/10.1007/s10924-005-5514-3
Pandey JK, Reddy KR, Kumar AP et al (2005) An overview on the degradability of polymer nanocomposites. Polym Degrad Stab 88(2):234–250. https://doi.org/10.1016/j.polymdegradstab.2004.09.013
Patel V, Mahajan Y (2012) Polymer nanocomposites drive opportunities in the automotive sector. Nanowerk. https://www.nanowerk.com/spotlight/spotid=23934.php. Accessed 10 Jan 2019
Paul DR, Robeson LM (2008) Polymer nanotechnology: nanocomposites. Polymer 49(15):3187–3204. https://doi.org/10.1016/j.polymer.2008.04.017
Paul MA, Delcourt C, Alexandre M et al (2005) Polylactide/montmorillonite nanocomposites: study of the hydrolytic degradation. Polym Degrad Stab 87(3):535–542. https://doi.org/10.1016/j.polymdegradstab.2004.10.011
Pei A, Butchosa N, Berglund LA et al (2013) Surface quaternized cellulose nanofibrils with high water absorbency and adsorption capacity for anionic dyes. Soft Matter 9(6):2047–2055. https://doi.org/10.1039/c2sm27344f
Piekarska K, Sowinski P, Piotrowska E et al (2016) Structure and properties of hybrid PLA nanocomposites with inorganic nanofillers and cellulose fibers. Compos Part A 82:34–41. https://doi.org/10.1016/j.compositesa.2015.11.019
Qian D, Dickey EC, Andrews R et al (2000) Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites. Appl Phys Lett 76:2868–2870. https://doi.org/10.1063/1.126500
Qiu K, Netravali AN (2013) Halloysite nanotube reinforced biodegradable nanocomposites using noncrosslinked and malonic acid crosslinked polyvinyl alcohol. Polym Compos 34(5):799–809. https://doi.org/10.1002/pc.22482
Rathod VT, Kumar JS, Jain A (2017) Polymer and ceramic nanocomposites for aerospace applications. Appl Nanosci 7(8):519548. https://doi.org/10.1007/s13204-017-0592-9
Ray SS, Bousmina M (2005) Biodegradable polymers and their layered silicate nanocomposites: in greening the 21st century materials world. Prog Mater Sci 50(8):962–1079. https://doi.org/10.1016/j.pmatsci.2005.05.002
Ray SS, Okamoto K, Maiti P et al (2002a) New poly(butylene succinate)/layered silicate nanocomposites: preparation and mechanical properties. J Nanosci Nanotechnol 2(2):171–176. https://doi.org/10.1166/jnn.2002.086
Ray SS, Yamada K, Okamoto M et al (2002b) New polylactide/layered silicate nanocomposite: a novel biodegradable material. Nano Lett 2(10):1093–1096. https://doi.org/10.1021/nl0202152
Ray SS, Maiti P, Okamoto M (2002c) New polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties. Marcomolecules 35(8):3104–3110. https://doi.org/10.1021/ma011613e
Ray SS, Okamoto K, Okamoto M (2003a) Structure-property relationship in biodegradable poly(butylene succinate)/layered silicate nanocomposites. Macromolecules 36(7):2355–2367. https://doi.org/10.1021/ma021728y
Ray SS, Yamada K, Okamoto M et al (2003b) Biodegradable polylactide/montmorillonite nanocomposites. J Nanosci Nanotechnol 3(6):503–510. https://doi.org/10.1166/jnn.2003.220
Ray SS, Yamada K, Okamoto M et al (2003c) New polylactide-layered silicate nanocomposites. 2. Concurrent improvements of materials properties, biodegradability and melt rheology. Polymer 44(3):857–866. https://doi.org/10.1016/S0032-3861(02)00818-2
Ray SS, Yamada K, Okamoto M et al (2003d) New polylactide/layered silicate nanocomposites. 3. High-performance biodegradable materials. Chem Mater 15(7):1456–1465. https://doi.org/10.1021/cm020953r
Rhim JW, Hong SI, Park HM et al (2006) Preparation and characterization of chitosan-based nanocomposite films with antimicrobial activity. J Agric Food Chem 54(16):5814–5822. https://doi.org/10.1021/jf060658h
Rhim JW, Par HM, Ha CS (2013) Bio-nanocomposites for food packaging applications. Prog Polym Sci 38(10–11):1629–1652. https://doi.org/10.1016/j.progpolymsci.2013.05.008
Richard P, Prasse T, Cavaille JY et al (2003) Reinforcement of rubbery epoxy by carbon nanofibres. Mater Sci Eng A 352(1–2):344–348. https://doi.org/10.1016/S0921-5093(02)00895-X
Rodriguez NLG, Thielemans W, Dufresne A (2006) Sisal cellulose whiskers reinforced polyvinyl acetate nanocomposites. Cellulose 13(3):261–270. https://doi.org/10.1007/s10570-005-9039-7
Rostami A, Nazockdast H, Karimi M (2016) Graphene induced microstructural changes of PLA/MWCNT biodegradable nanocomposites: rheological, morphological, thermal and electrical properties. RSC Adv 55(6):49747–49759. https://doi.org/10.1039/C6RA08345E
Saito T, Nishiyama Y, Putaux JL et al (2006) Homogeneous suspensions of individualized microfibrils form TEMPO-catalyzed oxidation of native cellulose. Biomacromolecules 7(6):1687–1691. https://doi.org/10.1021/bm060154s
Salaberria AM, Labidi J, Fernandes SCM (2014) Chitin nanocrystals and nanofibers as nano-sized fillers into thermoplastic starch-based biocomposites processed by melt-mixing. Chem Eng J 256:356–364. https://doi.org/10.1016/j.cej.2014.07.009
Salaberria AM, Diaz RH, Labidi J et al (2015) Preparing valuable renewable nanocomposite films based exclusively on oceanic biomass – Chitin nanofillers and chitosan. J React Funct Polym 89:31–39. https://doi.org/10.1016/j.reactfunctpolym.2015.03.003
Samir M, Alloin F, Dufresne A (2005) Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field. Biomacromolecules 6(2):612–626. https://doi.org/10.1021/bm0493685
Schadler LS (2003) Polymer-based and polymer-filled nanocomposites. In: Ajayan PM, Schadler LS, Braun PV (eds) Nanocomposite science and technology. Wiley-VCH, Weinheim, pp 77–154. https://doi.org/10.1002/3527602127
Schaefer DW, Justice RS (2007) How nano are nanocomposites? Macromolecules 40(24):8501–8517. https://doi.org/10.1021/ma070356w
Shameli K, Ahmad MB, Yunus WMZW et al (2010) Green synthesis of silver/monmorylonite/chitosan bionanocomposites using the UV irradiation method and evaluation of antibacterial activity. Int J Nanomedicine 5:875–887. https://doi.org/10.2147/IJN.S13632
Sikorska W, Musioł M, Zawidlak-Węgrzyńska B et al (2018) Compostable polymeric ecomaterials: environment-friendly waste management alternative to landfills. In: Martínez LMT, Kharissova OV, Kharisov BI (eds) Handbook of ecomaterials. Springer, Cham, pp 1–31. https://doi.org/10.1007/978-3-319-48281-1_36-1
Singh AA, Afrin S, Karim Z (2017) Green composites: versatile material for future. In: Jawaid M, Salit M, Alothman O (eds) Green biocomposites. Green energy and technology. Springer, Cham, pp 29–44. https://doi.org/10.1007/978-3-319-49382-4_2
Someya Y, Kondo N, Shibata M (2007) Biodegradation of poly(butylene adipate-co-butylene terephthalate)/layered-silicate nanocomposites. J Appl Polym Sci 106(2):730–736. https://doi.org/10.1002/app.24174
Soni B, Hassan EB, Mahmoud B (2015) Chemical isolation and characterization of different cellulose nanofibers from cotton stalks. Carbohydr Polym 134:581–589. https://doi.org/10.1016/j.carbpol.2015.08.031
Spadaccio C, Rainer A, Trombetta M et al (2009) Poly-L-lactic Acid/hydroxyapatite elecrtospun nanocomposites induce chondrogenic differentiation of human msc. Ann Biomed Eng 37(7):1376–1389. https://doi.org/10.1007/s10439-009-9704-3
SpecialChem (2018) World’s first biobased circular car developed using PLA from Total Corbion PLA. https://omnexus.specialchem.com/news/industry-news/total-corbion-pla-world-first-biobased-circular-car-000215330. Accessed 11 Jan 2019
Supova M, Martynkova G, Simha G et al (2011) Effect of nanofillers dispersion in polymer matrices: a review. Sci Adv Mater 3(1):1–25. https://doi.org/10.1166/sam.2011.1136
Tang C, Chen N, Zhang Q et al (2009) Preparation and properties of chitosan nanocomposites with nanofillers of different dimensions. Polym Degrad Stab 94(1):124–131. https://doi.org/10.1016/j.polymdegradstab.2008.09.008
Tang G, Wang X, Xing W et al (2012) Thermal degradation and flame retardance of biobased polylactide composites based on aluminum hypophosphite. Ind Eng Chem Res 51(37):12009–12016. https://doi.org/10.1021/ie3008133
Tang C, Chen N, Hu X (2017) Conducting polymer nanocomposites: recent developments and future prospects. In: Kumar V et al (eds) Conducting polymer hybrids. Springer, Cham, pp 1–44. https://doi.org/10.1007/978-3-319-46458-9_1
Teixeira EM, Bondanica TJ, Teodoro KRB et al (2011) Sugarcane bagasse whiskers: extraction and characterizations. Ind Crop Prod 33(1):63–66. https://doi.org/10.1016/j.indcrop.2010.08.009
Tidjani A, Wald O, Pohl M-M et al (2003) Polypropylene-graft-maleic anhydride-nanocomposites: I – characterization and thermal stability of nanocomposites produced under nitrogen and in air. Polym Degrad Stab 82(1):133–140. https://doi.org/10.1016/S0141-3910(03)00174-5
Wang N, Ding E, Cheng R (2007) Thermal degradation behaviors of spherical cellulose nanocrystals with sulfate groups. Polymer 48(12):3486–3493. https://doi.org/10.1016/j.polymer.2007.03.062
Wang G, Yu D, Kelkar AD, Zhang L (2017) Electrospun nanofiber: emerging reinforcing filler in polymer matrix composite materials. Prog Polym Sci 75:73–107. https://doi.org/10.1016/j.progpolymsci.2017.08.002
Wilson R, Joy J, George G, Anuraj V (2017) Nanocellulose: a novel support for water purification. In: Kharisov CMHB (ed) Advanced environmental analysis-application of nanomaterials. The Royal Society of Chemistry, Cambridge. https://doi.org/10.1039/9781782623625-00456
Włodarczyk J, Sikorska W, Rydz J et al (2018) 3D processing of PHA containing (bio)degradable materials. In: Koller M (ed) Current advances in biopolymer processing and characterization. Biomaterials – properties, production and devices series. Nova Science Publishers, New York, pp 121–168
Wu CHS, Liao HT (2007) Study of the preparation and characterization of biodegradable polylactide/multi-walled carbon nanotubes nanocomposites. Polymer 48(15):4449–4458. https://doi.org/10.1016/j.polymer.2007.06.004
Xing ZC, Chae WP, Baek JY et al (2010) In vitro assessment of antibacterial activity and cytocompatibility of silver-containing PHBV nanofibrous scaffolds for tissue engineering. Biomacromolecules 11(5):1248–1253. https://doi.org/10.1021/bm1000372
Zehetmeyer G, Soares RMD, Brandelli A et al (2012) Evaluation of polypropylene/montmorillonite nanocomposites as food packaging material. Polym Bull 68(8):2199–2217. https://doi.org/10.1007/s00289-012-0722-1
Zheng Y, Zheng Y, Ning R (2003) Effects of nanoparticles SiO2 on the performance of nanocomposites. Mater Lett 57(19):2940–2944. https://doi.org/10.1016/S0167-577X(02)01401-5
Zhou Q, Xanthos M (2008) Nanoclay and crystallinity effects on the hydrolytic degradation of polymers. Polym Degrad Stab 93(8):1450–1459. https://doi.org/10.1016/j.polymdegradstab.2008.05.014
Acknowledgments
This work was supported by the National Science Centre, Poland (NCN SONATA 11 project no. 2016/21/D/ST8/01993, “Multifaceted studies on the (bio)degradability profile of composites of selected biodegradable polymers with natural fillers and bacteriocins”).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this entry
Cite this entry
Musioł, M., Jurczyk, S., Sikorska, W., Rydz, J. (2019). (Bio)degradable Polymer Nanocomposites for Environmental Protection. In: Hussain, C., Thomas, S. (eds) Handbook of Polymer and Ceramic Nanotechnology. Springer, Cham. https://doi.org/10.1007/978-3-030-10614-0_42-1
Download citation
DOI: https://doi.org/10.1007/978-3-030-10614-0_42-1
Received:
Accepted:
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-10614-0
Online ISBN: 978-3-030-10614-0
eBook Packages: Springer Reference Chemistry and Mat. ScienceReference Module Physical and Materials ScienceReference Module Chemistry, Materials and Physics