Abstract
Nano-biocomposites based on a biodegradable bacterial copolyester, poly(hydroxybutyrate-co-hydroxyvalerate), have been elaborated with an organo-modified montmorillonite (OMMT) clay as nanofiller, and acetyl tributyl citrate as plasticizer. The corresponding (nano)structures, thermal and mechanical properties, permeability, and biodegradability have been determined. Polyhydroxyalkanoates are very thermal sensitive then to follow the degradation the corresponding matrices have been analyzed by size exclusion chromatography. The results indicate that the addition of the plasticizer decreases the thermo-mechanical degradation, during the extrusion. These nano-biocomposites show an intercalated/exfoliated structure with good mechanical and barrier properties, and an appropriated biodegradation kinetic. Intending to understand the changes in the thermal properties, the nano-biocomposites were characterized by thermal gravimetric analysis and differential scanning calorimetry. The presence of the OMMT clay did not influence significantly the transition temperatures. However, the filler not only acted as a nucleating agent which enhanced the crystallization, but also as a thermal barrier, improving the thermal stability of the biopolymer. The results indicated that the addition of the plasticizer reduces the glass transition temperature and the crystalline melting temperature. The plasticizer acts as a processing aid and increases the processing temperature range (lower melting temperature).
Similar content being viewed by others
References
Lenz RW, Marchessault RH (2005) Biomacromolecules 6:1
Kale G, Kijchavengkul T, Auras R, Rubino M, Selke SE, Singh SP (2007) Macromol Biosci 7:255
Bordes P, Pollet E, Avérous L (2009) Prog Polym Sci 34:125
Cava D, Giménez E, Gavara R, Lagaron JM (2006) Journal of Plastic Film & Sheeting 22:265
Bordes P, Pollet E, Bourbigot S, Avérous L (2008) Macromolecular Chemistry and Physics 209:1473
Hablot E, Bordes P, Pollet E, Avérous L (2008) Polym Degrad Stab 93:413
Ray SS, Okamoto M (2003) Prog Polym Sci 28:1539
Bordes P, Hablot E, Pollet E, Avérous L (2009) Polym Degrad Stab 94:789
Rahman M, Brazel SC (2004) Prog Polym Sci 29:1223
Choi JS, Park WH (2004) Polym Test 23:455
Wang L, Zhu WF, Wang XJ, Chen XY, Chen GQ, Xu K (2008) J Appl Polym Sci 107:166
García-Lopera1 R, Monzó IS, Porcar I, Abad C, Campos A (2008) Macromol Chem Phys 209:2147
Erceg M, Kovacic T, Klaric I (2005) Polym Degrad Stab 90:313
Yoshie K (2000) Polymer 41:3227
Marcilla A, Garcia-Quesada JC, Gil E (2008) J Appl Polym Sci 110:2102
Scandola M, Focarete ML, Adamus G, Sikorska W, Baranowska I, Swierczek S, Gnatowski M, Kowalczuk M, Jedliński Z (1997) Macromolecules 30:2568
Torre L, Kenny JM, Maffezzoli AM (1998) J Mater Sci 33:3137
Liu WJ, Yang HL, Wang Z, Dong LS, Liu JJ (2002) J Appl Polym Sci 86:2145
Rahman M, Brazel SC (2004) Prog Polym Sci 29:1223
Gorrasi G, Tortora M, Vittoria V, Pollet E, Lepoittevin B, Alexandre M, Dubois P (2003) Polymer 44:2271
Höglund A, Hakkarainen M, Albertsson A-C (2010) Biomacromolecules 11:277
Acknowledgments
The authors thank Dr. I. Lieberwirth, Max-Planck Institute for Polymer Research and DAAD, for the cryo-ultramicrotome donation. Prof. L. A. Pessan and M.Sc. D. Eiras, Federal University of Sao Carlos, are acknowledged for the permeation analyzes. The authors thank Chheng Ngov (LIPHT-ECPM) for SEC determinations. This work was supported by the Brazilian agencies CAPES and FAPESP.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Corrêa, M.C.S., Branciforti, M.C., Pollet, E. et al. Elaboration and Characterization of Nano-Biocomposites Based on Plasticized Poly(Hydroxybutyrate-Co-Hydroxyvalerate) with Organo-Modified Montmorillonite. J Polym Environ 20, 283–290 (2012). https://doi.org/10.1007/s10924-011-0379-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10924-011-0379-0