1. Development and application of high strength gears

   • Jizhan Wu
   • Peitang Wei
   • Huaiju Liu

   Critical Review 09 April 2024 Pages: 3123 - 3148

   

2. Machine condition monitoring for defect detection in fused deposition modelling process: a review

   • Hao He
   • Zhi Zhu
   • Richard (Chunhui) Yang

   Critical Review Open access 19 April 2024 Pages: 3149 - 3178

   

3. Influence of superimposed pulse position in superimposed pulse current waveform on surface integrity in electrical discharge machining

   • Guisen Wang
   • Fuzhu Han

   ORIGINAL ARTICLE 08 April 2024 Pages: 3179 - 3191

   

4. An artificial intelligence system for quality level–based prediction of welding parameters for robotic gas metal arc welding

   • Tesfaye Negash Wordofa
   • Janaki Ramulu Perumalla
   • Abhay Sharma

   ORIGINAL ARTICLE 08 April 2024 Pages: 3193 - 3212

   

5. A novel forming process of AZ31 magnesium alloy square tube based on numerical simulations and experiments

   • Wei Zhang
   • Zhenwei Sun
   • Zhongwen Ou

   ORIGINAL ARTICLE 08 April 2024 Pages: 3213 - 3226

   

6. Development of polymer/carbon nanotubes incorporated sustainable materials for manufacturing of autobrake pad

   • Uyor Uwa Orji
   • Popoola Abimbola Patricia
   • Popoola Olawale

   ORIGINAL ARTICLE Open access 08 April 2024 Pages: 3227 - 3236

   

7. Monitoring tool wearing: a hybrid algorithm integrating residual structures and stacked BiLSTM

   • Yong Ge
   • Hiu Hong Teo
   • Lip Kean Moey

   ORIGINAL ARTICLE 08 April 2024 Pages: 3237 - 3250

   

8. A nonlinear design method of robust PI control by using adaptive backstepping control for web winding system of reversible cold rolling mill

   • Abdelmajid Akil
   • Nabila Rabbah

   ORIGINAL ARTICLE 08 April 2024 Pages: 3251 - 3266

   

9. Modeling and validation of the grinding morphology of ordered diamond grinding wheel

   • Shichun Li
   • Wenjing Cai
   • Zhi Yang

   ORIGINAL ARTICLE 08 April 2024 Pages: 3267 - 3284

   

10. Effect of root pass removal procedures on mechanical and microstructural properties of shielded metal arc welded joints

    • Muhammad Saleem Khan
    • Muhammad Abas
    • Saif Ullah Khalid

    ORIGINAL ARTICLE 08 April 2024 Pages: 3285 - 3295

    

11. Correction to: Effect of root pass removal procedures on mechanical and microstructural properties of shielded metal arc welded joints

    • Muhammad Saleem Khan
    • Muhammad Abas
    • Saif Ullah Khalid

    Correction 23 April 2024 Pages: 3297 - 3298

    

12. Electron beam powder bed fusion additive manufacturing of Ti6Al4V alloy lattice structures: orientation-dependent compressive strength and fracture behavior

    • Yawen Huang
    • Zhan Wen Chen
    • Saret Singamneni

    ORIGINAL ARTICLE Open access 09 April 2024 Pages: 3299 - 3311

    

13. Study of dynamic welding pool for AZ31B magnesium alloy with adjustable ring mode laser welding

    • Jing Hu
    • Lei Guo

    ORIGINAL ARTICLE 09 April 2024 Pages: 3313 - 3332

    

14. Research on electric spindle thermal error prediction model based on DBO-SVM

    • Yaonan Cheng
    • Kezhi Qiao
    • Jing Xue

    ORIGINAL ARTICLE 09 April 2024 Pages: 3333 - 3347

    

15. Effect of reinforced particles on the machinability of Al alloy under MQL, cryogenic, and hybrid lubrication

    • Vinothkumar Sivalingam
    • Haochen Liu
    • Ramesh Raju

    ORIGINAL ARTICLE 09 April 2024 Pages: 3349 - 3361

    

16. Performance evaluation of polymer-filled metal fused filament fabrication tooling for profile extrusion

    • Martin Kain
    • Paolo Parenti
    • Guido Tosello

    ORIGINAL ARTICLE Open access 09 April 2024 Pages: 3363 - 3378

    

17. A systemic approach to identify the volumetric and dynamic errors for five-axis machine tools with double ball-bar test

    • Nuodi Huang
    • Liyao Hou
    • Limin Zhu

    ORIGINAL ARTICLE 09 April 2024 Pages: 3379 - 3388

    

18. Additive manufacturing of Al thick wall using high-pressure cold spraying: issues of porosity and mechanical properties

    • Mohamed Sokore
    • Wembo Li
    • Rija Nirina Raoelison

    ORIGINAL ARTICLE 09 April 2024 Pages: 3389 - 3413

    

19. Process parameter modeling for the fabrication of functionally graded materials via direct ink writing

    • Shijie Wang
    • Guolin Duan

    ORIGINAL ARTICLE 09 April 2024 Pages: 3415 - 3426

    

20. Integrating numerical techniques and predictive diagnosis for precision enhancement in roller cam rotary table

    • Tzu-Chi Chan
    • Shao-Chi Wu
    • Shinn-Liang Chang

    ORIGINAL ARTICLE 09 April 2024 Pages: 3427 - 3445

    

21. Surface-conformed approach for mechanical property analysis using ultrasonic welding of dissimilar metals

    • Zeshan Abbas
    • Jianxiong Deng
    • Md Shafiqul Islam

    ORIGINAL ARTICLE 10 April 2024 Pages: 3447 - 3466

    

22. Design and characterization of a vibrating tool for incremental sheet forming process

    • Johra Marwan
    • Courteille Eric
    • Sebban Théo

    ORIGINAL ARTICLE 10 April 2024 Pages: 3467 - 3477

    

23. Fault diagnosis of belt conveyor idlers based on gradient boosting decision tree

    • João L. L. Soares
    • Thiago B. Costa
    • Danilo S. Braga

    ORIGINAL ARTICLE 11 April 2024 Pages: 3479 - 3488

    

24. Steel surface defect recognition using classifier combination

    • Rachid Zaghdoudi
    • Abdelmalek Bouguettaya
    • Adel Boudiaf

    ORIGINAL ARTICLE 11 April 2024 Pages: 3489 - 3505

    

25. Experimental analysis of repaired CFRP by innovative hot bonding technology

    • Federica Donadio
    • Ilaria Papa
    • Antonio Viscusi

    ORIGINAL ARTICLE 11 April 2024 Pages: 3507 - 3518

    

26. Obtaining of combined titanium-steel structures by electron beam freeform fabrication using niobium and copper interlayers

    • Egor V. Terentyev
    • Khariton M. Kozyrev
    • Daria A. Zhgut

    ORIGINAL ARTICLE 11 April 2024 Pages: 3519 - 3533

    

27. Mechanical properties of AISI 1045 carbon steel plates weld overlay with EnDOTec DO15 using CMT and GMAW-P

    • Rafael Cortés-Rodríguez
    • Ricardo Rafael Ambriz
    • Francisco Fernando Curiel-López

    ORIGINAL ARTICLE 12 April 2024 Pages: 3535 - 3551

    

28. Tailoring surface roughness through the temporal variation of additive manufacturing process parameters

    • Barnaby Hawthorn
    • Ailsa Mummery
    • Lauren E. J. Thomas-Seale

    ORIGINAL ARTICLE Open access 12 April 2024 Pages: 3553 - 3566

    

29. Modeling and simulation of the effect of scan strategy on spatter movement in laser powder bed fusion

    • Weihong Cen
    • Yangzhong Liu
    • Yu Long

    ORIGINAL ARTICLE 12 April 2024 Pages: 3567 - 3578

    

30. Fixture layout optimization for large thin-walled parts based on improved particle swarm optimization algorithm

    • Changhui Liu
    • Ying Zheng
    • Jianfeng Liu

    ORIGINAL ARTICLE 13 April 2024 Pages: 3579 - 3592

    

31. Optimization of side outlet holes in rotary sinking electrochemical milling of Ti6Al4V through the simulation of electric and flow fields

    • Xiaokang Yue
    • Ningsong Qu

    ORIGINAL ARTICLE 13 April 2024 Pages: 3593 - 3603

    

32. Tribological performance of steel-steel contact tribosurfaces by using nano-enhanced biolubricant

    • Kamarapu Santhosh Kumar
    • Amarnath Muniyappa
    • Munish Kumar Gupta

    ORIGINAL ARTICLE 13 April 2024 Pages: 3605 - 3620

    

33. Hot deformation behavior and processing workability of ERNiCrMo-3 alloy

    • Zhiren Sun
    • Yan Yang
    • Kaikun Wang

    ORIGINAL ARTICLE 15 April 2024 Pages: 3621 - 3636

    

34. Integrating machine learning and multi-objective optimization to investigate the magnetic and mechanical properties of FeSiCr soft magnetic composite processed by selective laser melting

    • Lien-Kai Chang
    • Kundi Jiang
    • Mi-Ching Tsai

    ORIGINAL ARTICLE 15 April 2024 Pages: 3637 - 3653

    

35. Impact of process parameters on the dynamic behavior of Inconel 718 fabricated via laser powder bed fusion

    • Michele Abruzzo
    • Giuseppe Macoretta
    • Luca Romoli

    ORIGINAL ARTICLE Open access 15 April 2024 Pages: 3655 - 3669

    

36. 3D-printed titanium-aluminum-vanadium alloy produced at various laser powers: evaluation of microstructures and mechanical characteristics

    • Ali Aqeel Salim
    • Hazri Bakhtiar
    • Muhammad Safwan Abd Aziz

    ORIGINAL ARTICLE 15 April 2024 Pages: 3671 - 3681

    

37. Modeling of temperature distribution and clad geometry of the molten pool during laser cladding of CoCrCuFeNi alloys

    • Dachuan Tian
    • Chonggui Li
    • Wenge Li

    ORIGINAL ARTICLE 15 April 2024 Pages: 3683 - 3697

    

38. Fabrication and performance investigations on explosively welded CuCrZr/316L hollow component for the breeding blanket

    • Bingyuan Zhang
    • Hua Li
    • Luqing Wang

    ORIGINAL ARTICLE 15 April 2024 Pages: 3699 - 3707

    

39. Reduced-order modelling for real-time physics-based variation simulation enhanced with adaptive sampling and optimized interpolation

    • Mario Brandon Russo
    • Pasquale Franciosa
    • Salvatore Gerbino

    ORIGINAL ARTICLE Open access 16 April 2024 Pages: 3709 - 3734

    

40. Laser-based thermomechanical joining of semi-transparent thermoplastics with technical steel

    • Silvio Genna
    • Patrizia Moretti
    • Simone Venettacci

    ORIGINAL ARTICLE 16 April 2024 Pages: 3735 - 3755

    

41. Analysis of the friction performance of deep-drawing steel sheets using network models

    • Sherwan Mohammed Najm
    • Tomasz Trzepieciński
    • Marek Szewczyk

    ORIGINAL ARTICLE Open access 16 April 2024 Pages: 3757 - 3769

    

42. Granite cutting performance depending on the traverse speed in abrasive waterjet multi-cutting

    • Yohan Cha
    • Hang-Lo Lee
    • Tae-Min Oh

    ORIGINAL ARTICLE 16 April 2024 Pages: 3771 - 3783

    

43. Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools

    • Muhammad Younas
    • Mushtaq Khan
    • Nawar Khan

    ORIGINAL ARTICLE Open access 16 April 2024 Pages: 3785 - 3799

    

44. An automatic robot polishing control method for compound surface comprising plane and curved surfaces

    • Hosham Wahballa
    • Jinjun Duan
    • Zhendong Dai

    ORIGINAL ARTICLE 16 April 2024 Pages: 3801 - 3819

    

45. Numerical simulation of arc characteristics in K-TIG welding

    • BaiYu Song
    • BoLun Dong
    • SanBao Lin

    ORIGINAL ARTICLE 16 April 2024 Pages: 3821 - 3837

    

46. Grooving of CFRP with water mist jet–assisted nanosecond pulsed laser: effect of process parameters on removal mechanisms and HAZ formation

    • Hui Jiao
    • Jia Zhou
    • Xiaoqing Yang

    ORIGINAL ARTICLE 16 April 2024 Pages: 3839 - 3859

    

47. Dynamic mechanical properties of selective laser-melted AlSi10Mg lattice structures: experimental and numerical analysis with emphasis on Johnson-Cook model parameters

    • Mustafa Caliskan
    • Hakan Hafizoglu
    • Nazim Babacan

    ORIGINAL ARTICLE Open access 17 April 2024 Pages: 3861 - 3875

    

48. Laser-Induced Breakdown Spectroscopy for composition monitoring during directed energy deposition of graded Fe-Ni alloys

    • Brian Squires
    • David Flannery
    • Andrey A. Voevodin

    Original Article 17 April 2024 Pages: 3877 - 3888

    

49. Shape functions to scanner comparison

    • Nikola Pajerová
    • Michal Koptiš

    ORIGINAL ARTICLE Open access 17 April 2024 Pages: 3889 - 3902

    

50. An investigation into optimizing the friction stir welding factors (FSWF) for yellow brass

    • Syed Farhan Raza
    • Kashif Ishfaq
    • Ahmed Murtaza Mehdi

    ORIGINAL ARTICLE 17 April 2024 Pages: 3903 - 3925