1. Influence of Argon Gas Flow Parameters in the Slot Plug on the Flow Behavior of Molten Steel in a Gas-Stirred Ladle

   • Rong Cheng
   • Liangjin Zhang
   • Jiongming Zhang

   Review 20 May 2021 Pages: 1827 - 1837

   

2. Mechanical Properties of the Ti₂AlNb Intermetallic: A Review

   • Kushagra Goyal
   • Neha Sardana

   Review 05 June 2021 Pages: 1839 - 1853

   

3. Recovery of Neodymium and Dysprosium from Waste Hard Disk Magnets: Roasting, Selective Leaching, Extraction and Stripping

   • Santosh Daware
   • Shally Gupta
   • Beena Rai

   Original Article 24 May 2021 Pages: 1855 - 1863

   

4. Feasibility Study of Metal Bioleaching in a Gold-Rich Ore Sample by Acidithiobacillus thiooxidans DSM 26636

   • José Daniel Aguilar Loa
   • Andrea Margarita Rivas-Castillo
   • Norma Gabriela Rojas-Avelizapa

   Original Article 24 May 2021 Pages: 1865 - 1872

   

5. Effects of the Addition of Intermetallic Compounds Based on Zr in the First Hydrogenation Process of the TiCr_1.1V_0.9 Alloy

   • Alejandro Martinez-Amariz
   • Dario Peña
   • Dilson dos Santos

   Original Article 25 May 2021 Pages: 1873 - 1881

   

6. Effect of Adding CNT on Dissimilar Welding of Aluminium Alloys by FSW

   • Amin Rabiezadeh
   • Farhad Arghavani
   • Masoud Mokhtari

   Original Article 25 May 2021 Pages: 1883 - 1894

   

7. Modeling Study for Understanding of Fluid Dynamics of Vortex Formation in Tundish Operation

   • Antariksh Gupta
   • Rakesh Kumar
   • Rajeev Kumar Singh

   Original Article 26 May 2021 Pages: 1895 - 1905

   

8. Interfacial Microstructure and Mechanical Properties of TC4 Titanium Alloy/316L Stainless Steel Joint Brazed with Ag_70.5Cu_27.5Ti₂ Filler Metal

   • Mei Yang
   • Xin Wu
   • Shuang Li

   Original Article 27 May 2021 Pages: 1907 - 1916

   

9. Assessment of Grain Size and Grain Refinement Efficiency by Calculation of Released Heat Attributed to Formation of Primary Aluminum Crystals During Solidification of Al7Si4Cu Alloy

   • Aleksandar M. Mitrašinović
   • Dejan B. Momčilović
   • Zoran Odanović

   Original Article 27 May 2021 Pages: 1917 - 1922

   

10. Effect of Curing Technique on the Properties of Superhydrophobic Coatings

    • K. Srinivasa Rao
    • R. Yogapriya
    • R. Subasri

    Original Article 27 May 2021 Pages: 1923 - 1932

    

11. Experimental Investigation of the Evolution of Fuel Clad Ballooning Using Real-Time X-ray Imaging and Its Microstructural Studies

    • Rosy Sarkar
    • V. D. Vijayanand
    • G. V. Prasad Reddy

    Original Article 28 May 2021 Pages: 1933 - 1942

    

12. Influence of FSW Process Parameters on Formability and Mechanical Properties of Tailor Welded Blanks AA6082-T6 and AA5083-O Using RSM with GRA-PCA Approach

    • Praveen Kumar
    • Satpal Sharma

    Original Article 29 May 2021 Pages: 1943 - 1968

    

13. Utilization of Kimberlite as Binder for Iron Ore Pellet Making

    • Sanjeev Kumar Chaurasiya
    • R. Markandeya

    Original Article 30 May 2021 Pages: 1969 - 1977

    

14. Tribological Properties of Surface Friction Hardened AISI 316L Steel

    • A. Khaksaran
    • R. Taghiabadi
    • M. Jafarzadegan

    Original Article 31 May 2021 Pages: 1979 - 1989

    

15. Assessment of Corrosion and Scratch Resistance of Plasma Electrolytic Oxidation and Hard Anodized Coatings Fabricated on AA7075-T6

    • C. Premchand
    • S. Hariprasad
    • N. Rameshbabu

    Original Article 31 May 2021 Pages: 1991 - 2002

    

16. Rheological and Thermal Investigation of Industrially Processed Glass Fiber Blended with Linear Low-Density Polyethylene for Rotational Molding Process

    • Nikita Gupta
    • PL. Ramkumar

    Original Article 03 June 2021 Pages: 2003 - 2011

    

17. Studies on Parametric Optimization of HVOF-Sprayed Cr₂O₃ Coatings on Al6061 Alloy

    • G. S. Pradeep Kumar
    • M. Harish Kumar
    • Gurumoorthy S. Hebbar

    Original Article 03 June 2021 Pages: 2013 - 2025

    

18. Influence of Treatment Time and Temperature on Surface Property of Active Screen Plasma-Nitrided EN24 Low Alloy Steel

    • Nand Kumar
    • Bidesh Roy
    • Bachu Deb

    Original Article 03 June 2021 Pages: 2027 - 2041

    

19. Complex Phenomenal Growth of Multi-walled Carbon Nanotubes in Conventional Arc Discharge Process

    • S. K. Chaudhary
    • K. K. Singh

    Original Article 04 June 2021 Pages: 2043 - 2048

    

20. Hardening Behaviour of Pellets Prepared from a Novel Combination of Rare Multimetallic Magnetite Ore and Binder

    • Biswajit Mishra
    • Raj Kumar Dishwar
    • Girija Shankar Mahobia

    Original Article 06 June 2021 Pages: 2049 - 2055

    

21. Blank Shape Optimization Considering 3D Space Targets for External and Internal Boundaries in Sheet Metal Forming Processes

    • Hamidreza Gharehchahi
    • Mohammad Javad Kazemzadeh-Parsi
    • Mehrdad Mohammadi

    Original Article 06 June 2021 Pages: 2057 - 2072

    

22. Investigation of Microstructure and Mechanical Properties of DSS 2205 Weld Thick Section for Pressure Vessel Application

    • Sagarkumar I. Shah
    • Hemantkumar R. Thakkar
    • G. D. Acharya

    Original Article 07 June 2021 Pages: 2073 - 2080

    

23. High Temperature Tensile Deformation Response of γ + α₂ Titanium Aluminide Processed through Ingot Metallurgy Route

    • R. K. Gupta
    • V. Anil Kumar
    • P. V. Venkitakrishnan

    Original Article 07 June 2021 Pages: 2081 - 2092

    

24. Microstructural Evolution and Mechanical Properties of Nano-Yttria Dispersed 316 L Austenitic Stainless Steel by Mechanical Alloying and Sintering

    • Trishita Roy
    • Vikas Shivam
    • N. K. Mukhopadhyay

    Original Article 08 June 2021 Pages: 2093 - 2104

    

25. Kinetics Studies of Sintered Nepheline Syenite Alkaline Leaching under Atmospheric Pressure

    • Kianmehr Mohammadloo
    • Shima Barakan
    • Valeh Aghazadeh

    Original Article 09 June 2021 Pages: 2105 - 2115