1. Safe, flexible and efficient sheet metal forming: formability - fracture, incremental sheet forming & rolling

   • Dorel Banabic
   • Anne-Marie Habraken
   • Jeong Whan Yoon

   Editorial 24 June 2015 Pages: 259 - 260

2. Effect of hardening models on different ductile fracture criteria in sheet metal forming

   • Shahram Abbasnejad Dizaji
   • Haluk Darendeliler
   • Bilgin Kaftanoğlu

   Thematic Issue: Formability of metallic materials 08 August 2014 Pages: 261 - 267

   

3. Study of curvature and pre-damage effects on the edge stretchability of advanced high strength steel based on a new simulation model

   • Chenjue Ye
   • Jieshi Chen
   • Xiangyu Yu

   Thematic Issue: Formability of metallic materials 05 November 2014 Pages: 269 - 276

   

4. Mechanical property of magnesium alloy sheet with hardening deterioration at warm temperatures and its application for failure analysis: Part I - property characterization

   • Wooram Noh
   • Youngwoo Koh
   • Kwansoo Chung

   Thematic Issue: Formability of metallic materials 23 November 2014 Pages: 277 - 285

   

5. Mechanical property of magnesium alloy sheet with hardening deterioration at warm temperatures and its application for failure analysis: Part II – failure analysis

   • Chulhwan Lee
   • Youngwoo Koh
   • Kwansoo Chung

   Thematic Issue: Formability of metallic materials 23 November 2014 Pages: 287 - 295

   

6. Prediction of forming limit diagrams using the modified M-K method in hydroforming of aluminum tubes

   • R. Hashemi
   • R. Madoliat
   • A. Afshar

   Thematic Issue: Formability of metallic materials 23 December 2014 Pages: 297 - 303

   

7. Modified texture and room temperature formability of magnesium alloy sheet by Li addition

   • Qingshan Yang
   • Bin Jiang
   • Fusheng Pan

   Thematic Issue: Formability of metallic materials 08 January 2015 Pages: 305 - 311

   

8. Effect of slide motion on springback in 2-D draw bending for AHSS

   • Omid Majidi
   • Frédéric Barlat
   • Myoung-Gyu Lee

   Thematic Issue: Formability of metallic materials 13 January 2015 Pages: 313 - 326

   

9. Path-independent forming limit models for multi-stage forming processes

   • Robert E. Dick
   • Jeong Whan Yoon
   • Thomas B. Stoughton

   Thematic Issue: Formability of metallic materials 06 March 2015 Pages: 327 - 337

   

10. Towards accuracy improvement in single point incremental forming of shallow parts formed under laser assisted conditions

    • Amirahmad Mohammadi
    • Hans Vanhove
    • Joost R. Duflou

    Thematic Issue: Flexible forming - Incremental Sheet Forming & Roll Forming 23 December 2014 Pages: 339 - 351

    

11. Fast simulation of incremental sheet metal forming by adaptive remeshing and subcycling

    • Markus Bambach

    Thematic Issue: Flexible forming - Incremental Sheet Forming & Roll Forming 23 December 2014 Pages: 353 - 360

    

12. Titanium based cranial reconstruction using incremental sheet forming

    • B. Lu
    • H. Ou
    • J. Chen

    Thematic Issue: Flexible forming - Incremental Sheet Forming & Roll Forming Open access 11 December 2014 Pages: 361 - 370

    

13. Optimization of relative tool position in accumulative double sided incremental forming using finite element analysis and model bias correction

    • Ebot Ndip-Agbor
    • Jacob Smith
    • Jian Cao

    Thematic Issue: Flexible forming - Incremental Sheet Forming & Roll Forming 13 January 2015 Pages: 371 - 382

    

14. Simulation of a two-slope pyramid made by SPIF using an adaptive remeshing method with solid-shell finite element

    • J. I. V. de Sena
    • C. F. Guzmán
    • R. J. Alves de Sousa

    Thematic Issue: Flexible forming - Incremental Sheet Forming & Roll Forming 10 January 2015 Pages: 383 - 394

    

15. Analytical prediction of formed geometry in multi-stage single point incremental forming

    • R. Lingam
    • A. Bansal
    • N. V. Reddy

    Thematic Issue: Flexible forming - Incremental Sheet Forming & Roll Forming 15 March 2015 Pages: 395 - 404

    

16. An experimental and numerical investigation on micro rolling for ultra-thin strip

    • H. B. Xie
    • K. Manabe
    • Z. Y. Jiang

    Thematic Issue: Flexible forming - Incremental Sheet Forming & Roll Forming 19 March 2015 Pages: 405 - 412

    

17. Stress based prediction of formability and failure in incremental sheet forming

    • Md Ziaul Haque
    • Jeong Whan Yoon

    Thematic Issue: Flexible forming - Incremental Sheet Forming & Roll Forming 16 April 2015 Pages: 413 - 421

    

18. A first step towards a simple in-line shape compensation routine for the roll forming of high strength steel

    • Buddhika Abeyrathna
    • Bernard Rolfe
    • Matthias Weiss

    Thematic Issue: Flexible forming - Incremental Sheet Forming & Roll Forming 18 April 2015 Pages: 423 - 434