1. Models for shear properties/behavior of dry fibrous materials at various scales: a review

   • Elena Syerko
   • Sébastien Comas-Cardona
   • Christophe Binetruy

   Review 01 August 2013 Pages: 1 - 23

   

2. Meshless methods for the simulation of material forming

   • Elías Cueto
   • Francisco Chinesta

   Review 24 August 2013 Pages: 25 - 43

   

3. Derivation of a forming limit stress diagram from an experimental FLC, and comparison of the two criteria when applied to FE simulation of a pressing using different yield functions

   • Alan R. Carr
   • Andy Walker
   • Etienne Combaz

   Original Research 02 October 2013 Pages: 45 - 57

   

4. A new method to determine isothermal flow curves for integrated process and microstructural simulation in metal forming

   • W. Xiong
   • J. Lohmar
   • G. Hirt

   Original Research 02 October 2013 Pages: 59 - 66

   

5. Steam-bending properties of seven poplar hybrid clones

   • Svetka Kuljich
   • Claudia B. Cáceres
   • Roger E. Hernández

   Original Research 20 September 2013 Pages: 67 - 72

   

6. 3D Modeling of squeeze flows occurring in composite laminates

   • Chady Ghnatios
   • Francisco Chinesta
   • Christophe Binetruy

   Original Research 01 October 2013 Pages: 73 - 83

   

7. Processing map for a cast and homogenized near alpha titanium alloy

   • I. Balasundar
   • T. Raghu
   • B. P. Kashyap

   Original Research 02 October 2013 Pages: 85 - 97

   

8. Experimental and numerical investigation of spiral irradiating scheme for flame forming of a bowl shaped surface

   • Mehdi Safari
   • Mahmoud Farzin
   • Pouria Yazdi

   Original Research 02 October 2013 Pages: 99 - 109

   

9. Numerical simulation of extruded clay paste compression

   • Jérémie Vignes
   • Fabrice Schmidt
   • Jean Frédéric Dalmasso

   Original Research 05 October 2013 Pages: 111 - 118

   

10. Effect of using eletromagnetic stirring on AISI 1025 steel forged flanges

    • Charles Chemale Yurgel
    • Fabio Andre Lora
    • Lirio Schaeffer

    Original Research 17 October 2013 Pages: 119 - 126

    

11. Analytical and numerical modeling of light scattering in composite transmission laser welding process

    • André Chateau Akué Asséko
    • Benoît Cosson
    • Eric Lafranche

    Original Research 26 October 2013 Pages: 127 - 135

    

12. Spring back evaluation for high and ultra high strength sheet steels with the bending under tension machine

    • Arne Melander
    • Håkan Thoors
    • Ma Ning

    Original Research 01 November 2013 Pages: 137 - 144

    

13. Finite element method simulation of the hot extrusion of a powder metallurgy stainless steel grade

    • D. Sornin
    • A. Karch
    • D. Nunes

    Original Research 19 November 2013 Pages: 145 - 155

    

14. Influence of sintering parameters on dynamic mechanical properties of selective laser sintered parts

    • Vishal S. Sharma
    • Sharanjit Singh
    • Parmod Kumar

    Original Research 15 December 2013 Pages: 157 - 166