1. Interactive design of cellular manufacturing systems, optimality and flexibility

   • Adnan M. Mukattash
   • Khaldoon K. Tahboub
   • Mazin B. Adil

   Original Paper 06 July 2017 Pages: 769 - 776

   

2. Experiences in implementing design heuristics for innovation in product design

   • Jorge Restrepo
   • David Ríos-Zapata
   • Jérôme Pailhès

   Original Paper 07 July 2017 Pages: 777 - 786

   

3. Tool path planning without interference for convex surfaces based on the optimal cutter orientation of the annular cutter

   • Chunsheng He
   • Minli Zheng
   • Xin Tong

   Original Paper 17 July 2017 Pages: 787 - 800

   

4. Secondary features segmentation from high-density tessellated surfaces

   • L. Di Angelo
   • P. Di Stefano
   • A. E. Morabito

   Original Paper 20 July 2017 Pages: 801 - 809

   

5. Using FEM simulation to predict structural performances of a sailing dinghy

   • A. Mancuso
   • G. Pitarresi
   • D. Tumino

   Original Paper 24 July 2017 Pages: 811 - 822

   

6. Investigation on the temperature field under the action of the blunt tool edge for precision cutting of titanium alloys

   • Shucai Yang
   • Xin Tong
   • Chunsheng He

   Original Paper 04 December 2017 Pages: 823 - 831

   

7. A Welding Capability Assessment Method (WCAM) to support multidisciplinary design of aircraft structures

   • Julia Madrid
   • Anders Forslund
   • Petter Andersson

   Original Paper Open access 16 September 2017 Pages: 833 - 851

   

8. The process of designing a rotating platform artificial knee prosthesis with posterior stabilizers by finite element analysis

   • Saúl Íñiguez-Macedo
   • Fátima Somovilla-Gómez
   • Félix Sanz-Adán

   Original Paper 12 September 2017 Pages: 853 - 864

   

9. A key components-based heuristic modular product design approach to reduce product assembly cost

   • Junfeng Ma
   • Gül E. Okudan Kremer
   • Mian Li

   Original Paper 15 December 2017 Pages: 865 - 875

   

10. Fast and accurate mesh registration applied to in-line dimensional inspection processes

    • Jairo R. Sánchez
    • Álvaro Segura
    • Iñigo Barandiaran

    Original Paper 20 December 2017 Pages: 877 - 887

    

11. Interactive design for additive manufacturing: a creative case of synchronous belt drive

    • Hu Fuwen
    • Cheng Jiajian
    • He Yunhua

    Original Paper 20 December 2017 Pages: 889 - 901

    

12. Ellipsoid bounding region-based ChainMail algorithm for soft tissue deformation in surgical simulation

    • Jinao Zhang
    • Yongmin Zhong
    • Chengfan Gu

    Original Paper 06 December 2017 Pages: 903 - 918

    

13. A preliminary design innovation aid methodology based on energy analysis and TRIZ tools exploitation

    • Khadija Hmina
    • Mohammed Sallaou
    • Larbi Lasri

    Original Paper 30 January 2018 Pages: 919 - 928

    

14. Interactive control of combustion stability and operating limits in a biogas-fueled spark ignition engine with high compression ratio

    • J. Jaramillo
    • J. Zapata
    • I. D. Bedoya

    Original Paper 20 December 2017 Pages: 929 - 942

    

15. Safety of machinery: requirement specification based on functional need and work situations analysis

    • Mahenina Remiel Feno
    • Patrick Martin
    • Ali Siadat

    Original Paper 19 December 2017 Pages: 943 - 953

    

16. Modal analysis of the multi-shaped coupled honeycomb structures used in satellites structural design

    • Houria Salem
    • Djilali Boutchicha
    • Abdelmadjid Boudjemai

    Original Paper 27 December 2017 Pages: 955 - 967

    

17. Controlling form errors in 3D printed models associated to size and position on the working plane

    • Ferdinando Vitolo
    • Massimo Martorelli
    • Antonio Lanzotti

    Original Paper 07 December 2017 Pages: 969 - 977

    

18. Preliminary study for a full colour low cost open source 3D printer, based on the combination of fused deposition modelling (FDM) or fused filament fabrication (FFF) and inkjet printing

    • Fabrizio Regina
    • Fulvio Lavecchia
    • Luigi Maria Galantucci

    Original Paper 07 December 2017 Pages: 979 - 993

    

19. Design for manufacturability of macro and micro products: a case study of heat exchanger design

    • F. Omidvarnia
    • L. Weng Feng
    • N. H. Mortensen

    Original Paper 24 January 2018 Pages: 995 - 1006

    

20. Characterization of surface topography of 3D printed parts by multi-scale analysis

    • Yann Quinsat
    • Claire Lartigue
    • Lamine Hattali

    Original Paper 27 November 2017 Pages: 1007 - 1014

    

21. Similarity and numerical analysis of the generalized Levèque problem to predict the thermal boundary layer

    • Ali Belhocine
    • Oday Ibraheem Abdullah

    Original Paper 02 December 2017 Pages: 1015 - 1025

    

22. Registration of mandibular movement for dental diagnosis, planning and treatment

    • E. Solaberrieta
    • L. Barrenetxea
    • I. De Prado

    Original Paper 04 December 2017 Pages: 1027 - 1038

    

23. An interoperability process between CAD system and CAE applications based on CAD data

    • Riadh Ben Hadj
    • Imen Belhadj
    • Moncef Hammadi

    Original Paper 16 December 2017 Pages: 1039 - 1058

    

24. Shape and functional optimization of biodegradable magnesium stents for manufacturing by ultrasonic-microcasting technique

    • I. V. Gomes
    • H. Puga
    • J. L. Alves

    Original Paper 07 December 2017 Pages: 1059 - 1069

    

25. Multi-criteria optimization of the part build orientation (PBO) through a combined meta-modeling/NSGAII/TOPSIS method for additive manufacturing processes

    • S. Khodaygan
    • A. H. Golmohammadi

    Original Paper 15 December 2017 Pages: 1071 - 1085

    

26. Water dynamics simulation in the system pipes of a concentrated photovoltaic-thermal collector solar painel

    • Michele Andreoli
    • João Paulo N. Torres
    • Carlos A. F. Fernandes

    Original Paper 31 January 2018 Pages: 1087 - 1093

    

27. A multi objective optimum design approach for rolling element bearing

    • S. Panda
    • S. N. Panda

    Original Paper 19 March 2018 Pages: 1095 - 1108

    

28. Advanced roll powder sintering additive manufacturing technology

    • Vyacheslav R. Shulunov

    Original Paper 28 March 2018 Pages: 1109 - 1117

    

29. Effect of hybrid wire EDM conditions on generation of residual stresses in machining of HCHCr D2 tool steel under ultrasonic vibration

    • Sanjay Kumar
    • Sandeep Grover
    • R. S. Walia

    Original Paper 31 March 2018 Pages: 1119 - 1137

    

30. An integrated acoustic–mechanical development method for off-road motorcycle silencers: from design to sound quality test

    • Edoardo A. Piana
    • Stefano Uberti
    • Gabriele Baronio

    Original Paper 10 March 2018 Pages: 1139 - 1153