1. Preventing the Failure of 3D-Printed Aerospace Components

   • Daniel J. Thomas

   Editorial 23 March 2022 Pages: 865 - 867

   

2. Research Progress of Dented Pipelines

   • Xiao Tian
   • Min-xu Lu

   Review 23 May 2022 Pages: 868 - 877

   

3. Heat Transfer, Thermal Stress and Failure Inspection of a Gas Turbine Compressor Stator Blade Made of Five Different Conventional Superalloys and Ultra-High-Temperature Ceramic Material: A Direct Numerical Investigation

   • Abyaz Abid
   • Md Tanbir Sarowar

   Lessons Learned 24 May 2022 Pages: 878 - 898

   

4. City Gas Distribution Incident Analysis in India using Pareto Principle: A Comprehensive Analysis

   • Satyam Rajput
   • Neha Sabharwal
   • Bikarama Prasad Yadav

   Lessons Learned 20 May 2022 Pages: 899 - 911

   

5. Root Cause Analysis of SuperHeat Exchanger Tubes of Bagasse-Fired Power Plant

   • Bilal Waseem
   • Hamza Butt
   • Abdul Karim Aziz

   Case History---Peer-Reviewed 27 April 2022 Pages: 912 - 917

   

6. A Predictive Analysis of Electronic Control Unit System Defects Within Automotive Manufacturing

   • Serkan Varol
   • Patrick Odougherty

   Case History---Peer-Reviewed 20 April 2022 Pages: 918 - 925

   

7. Failure Analysis of Accelerometer Servo Circuit Caused by Electrical Damage to Differential Capacitance Detector

   • Ming Zhang
   • Xin Xu
   • Zhenshan He

   Case History---Peer-Reviewed 25 April 2022 Pages: 926 - 933

   

8. Failure on an Automobile Rear Axle Shaft

   • S. D. Rasika Perera

   Case History---Peer-Reviewed 18 May 2022 Pages: 934 - 939

   

9. Product News

   News 03 April 2022 Pages: 940 - 941

   

10. Industry Updates

    News 30 March 2022 Pages: 942 - 943

11. Professional Resources

    News 03 April 2022 Pages: 944 - 948

    

12. Training

    Calendar 15 April 2022 Pages: 949 - 951

13. Events

    • Karesha Nutter

    Calendar 01 April 2022 Pages: 952 - 955

14. Evaluation of the Structural Integrity of a Boiling Water Reactor Core Shroud with an Irregular Distribution of Circumferential Cracks: Elasto-plastic and Plastic Analysis

    • P. Ruiz-López
    • L. H. Hernández-Gómez
    • G. Urriolagoitia-Calderón

    Tools and Techniques Open access 19 April 2022 Pages: 956 - 967

    

15. Failure Analysis of Compressor Blades of Aero-Engine

    • S. Madhav
    • Manish Roy

    Technical Article---Peer-Reviewed 04 May 2022 Pages: 968 - 982

    

16. A Mining Tailings Storage Facility Failure Analysis Model using Bow-tie Representation

    • Congcong Chen
    • Bo Ma
    • Zhongxue Li

    Technical Article---Peer-Reviewed 18 March 2022 Pages: 983 - 999

    

17. Nonlinear Failure Analysis on Pressurized Cylindrical Shell Using Finite Element Method: Comparison of Theoretical and Experimental Data

    • Junhui Chai
    • Zhongjie Lv
    • Binbin Zhai

    Technical Article---Peer-Reviewed 21 March 2022 Pages: 1000 - 1010

    

18. Failure Analysis of Ram Body and Sealing Performance of Semi-Sealed Blowout Preventer

    • Yang Liu
    • Liqin Qian
    • Zhanghua Lian

    Technical Article---Peer-Rviewed 03 April 2022 Pages: 1011 - 1030

    

19. Health Indicator Construction and Life Prediction of the Point Switch Machine

    • Yunshui Zheng
    • Weimin Chen

    Technical Article---Peer-Reviewed 04 April 2022 Pages: 1031 - 1039

    

20. Experimental and Numerical Study of the Effect of Patch Shape for Notched Cracked Composite Structure Repaired by Composite Patching

    • Khaoula Amari
    • Mohamed Berrahou

    Technical Article---Peer-Reviewed 07 April 2022 Pages: 1040 - 1049

    

21. Analysis of a Chain Conveyor Link Failure

    • Dalia S. Shahin
    • Waleed Khalifa
    • Lamiaa Z. Mohamed

    Technical Article---Peer-Reviewed 10 April 2022 Pages: 1050 - 1058

    

22. Coating Failure Prevention for Industrial Valves by Substrate Surface Preparation in Offshore Oil and Gas Industry: A Literature Review

    • Karan Sotoodeh

    Review Article 08 April 2022 Pages: 1059 - 1067

    

23. Failure Investigation and Design Optimization of Fractured Austenitic Pressure Sensing Pipe During Thermal Shock Testing

    • Tengjiao Qi
    • Stone Shih
    • Bharat Joshi

    Technical Article---Peer-Reviewed 11 April 2022 Pages: 1068 - 1074

    

24. Material Failure Analysis of Three In-flight Wing Fractures of Wooden Aircraft

    • D. Lukowsky
    • A. Gohla

    Technical Article---Peer-Reviewed Open access 11 April 2022 Pages: 1075 - 1084

    

25. Effect of Printing Velocity on the Microscopic Void Distribution of 3D-Printed Short-Fiber-Reinforced Composites

    • Hui Luo
    • Haoming Yang
    • Ke Bo

    Technical Article---Peer-Reviewed 15 April 2022 Pages: 1085 - 1090

    

26. On the Effectiveness of the Iterative Coupling FEM–BEM for the Analysis of the Problems with Elastoplastic Failure Behavior

    • Daho Boumaiza
    • Benaoumeur Aour

    Technical Article---Peer-Reviewed 18 April 2022 Pages: 1091 - 1106

    

27. Fretting Fatigue Behavior of Magnesium Metal Matrix Composite Fabricated Through Friction Stir Processing Using Nickel Reinforced Particles

    • Sangam Sangral
    • Mahesh Patel
    • M. Jayaprakash

    Technical Article---Peer-Reviewed 19 April 2022 Pages: 1107 - 1120

    

28. Full-Cycle Failure Analysis Using Conventional Time Series Analysis and Machine Learning Techniques

    • B. Billuroglu
    • V. N. Livina

    Technical Article---Peer-Reviewed 19 April 2022 Pages: 1121 - 1134

    

29. Failure Analysis of Firefighting Pipe: Case Study

    • Dalia S. Shahin
    • Waleed Khalifa
    • Lamiaa Z. Mohamed

    Technical Article---Peer-Reviewed 20 April 2022 Pages: 1135 - 1143

    

30. Changes of Natural Frequencies of Shafts Due to Pitting Corrosion

    • Mohammad Aryayi
    • Mohammad Reza Hadavi
    • Reza Ansari

    Technical Article---Peer-Reviewed 26 April 2022 Pages: 1144 - 1150

    

31. Experimental Modal Analysis of Induction Machine Stator End Windings of Driving End and Non-Driving End to Predict the Looseness

    • Kapu V Sri Ram Prasad
    • Varsha Singh

    Technical Article---Peer-Reviewed 28 April 2022 Pages: 1151 - 1163

    

32. Fault Feature Extraction of Rolling Element Bearing under Complex Transmission Path Based on Multiband Signals Cross-Correlation Spectrum

    • Danchen Zhu
    • Yangyang Pan
    • Weipeng Gao

    Technical Article---Peer-Reviewed 28 April 2022 Pages: 1164 - 1179

    

33. Failure Analysis of Once-Through Steam Generator (OTSG) External Piping Welds

    • Nitin Saini
    • Yajing Wang
    • Leijun Li

    Technical Article---Peer-Reviewed 04 May 2022 Pages: 1180 - 1195

    

34. Studying of Nanoribbon and Circular Poly (Vinyl Alcohol) Nanofibers Deposited by Electrospinning: Film Synthesis, Characterization Structure, and Resistance Corrosion

    • S. M. Madani
    • P. Sangpour
    • B. Ramezanzadeh

    Technical Article---Peer-Reviewed 10 May 2022 Pages: 1196 - 1214

    

35. Finite Element Simulation and Fatigue Damage Analysis of High-Speed Train Gearbox Shell Based on Structure and Material Cross-Scale Correlation

    • Yibo Ai
    • Zhenwei Yang
    • Weidong Zhang

    Technical Article---Peer-Reviewed 18 May 2022 Pages: 1215 - 1228

    

36. Study on Data Multiplication of Impact Toughness by Specimen Reconstitution Technique and Master Curve

    • Qiang-mao Wan
    • Li-sha Chen
    • Jun Zhou

    Technical Article---Peer-Reviewed 18 May 2022 Pages: 1229 - 1235

    

37. Experimental Evaluation of VIKOR-Based Cost Function Optimization of Finite Control Set-Predictive Torque Control for Permanent Magnet Synchronous Motor Drive

    • Avinash Vujji
    • Ratna Dahiya

    Technical Article---Peer-Reviewed 22 May 2022 Pages: 1236 - 1251

    

38. Investigating the Effects of H₂O Interaction with Rainscreen Façade ACMs During Fire Exposure

    • L. Casey
    • S. Simandjuntak
    • A. Saifullah

    Technical Article---Peer-Reviewed Open access 20 May 2022 Pages: 1252 - 1259

    

39. An Interval-Probability Hybrid Reliability Method for Truck Frame

    • Feng Li
    • Yichen Zhou
    • Hongfeng Li

    Technical Article---Peer-Reviewed 20 May 2022 Pages: 1260 - 1267

    

40. Failure Analysis of Tripping Tubing in an Oilfield

    • Hongbo Zhang
    • Gaofeng Wang
    • Liang Zhang

    Technical Article---Peer-Reviewed 19 May 2022 Pages: 1268 - 1275

    

41. Coiled Tubing Erosion Prediction and Fracturing Fluid Parameters Optimization During Hydraulic Jet Fracturing

    • Airong Xu
    • Yihua Dou
    • Xianke Cui

    Technical Article---Peer-Reviewed 23 May 2022 Pages: 1276 - 1292

    

42. Introducing of a Method for Assessment of Difficulty of Firefighting Operation for Full Surface Atmospheric Storage Tanks Fires

    • Mahsa Azizinejad
    • Mostafa Mirzaei Aliabadi
    • Omid Kalatpour

    Technical Article---Peer-Reviewed 23 May 2022 Pages: 1293 - 1307

    

43. Deep Convolution Neural Network-Based Crack Feature Extraction, Detection and Quantification

    • Shuai Teng
    • Gongfa Chen

    Technical Article---Peer-Reviewed 25 May 2022 Pages: 1308 - 1321