Journal of Failure Analysis and Prevention - ASM Top Downloaded Articles 2023

1. The Fractography and Crack Patterns of Broken Glass

2. The Effects of Sulfide Inclusions on Mechanical Properties and Failures of Steel Components

3. An Overview of the Approaches for Automotive Safety Integrity Levels Allocation

4. UV Aging Effects on Polycarbonate Properties

5. Analyzing the Failure of Welded Steel Components in Construction Systems

6. Managing Cold Temperature and Brittle Fracture Hazards in Pressure Vessels

7. The Alexander L. Kielland Disaster Revisited: A Review by an Experienced Welding Engineer of the Catastrophic North Sea Platform Collapse

8. Revolutionizing Failure Modes and Effects Analysis with ChatGPT: Unleashing the Power of AI Language Models

9. Preload from Tightening and Removal Torque

10. Material Failure Analysis of Three In-flight Wing Fractures of Wooden Aircraft

11. Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials

12. An Analysis of Failures Leading to Fire Accidents in Hospitals; with Specific Reference to India

13. The Effect of Phosphate on the Properties of Copper Drinking Water Pipes Experiencing Localized Corrosion

14. Wheel Attachment Failures in Light-Duty Vehicles

15. Steel Wire Ropes Service Life

16. Case Studies in Graphitic Corrosion of Cast Iron Pipe

17. Microstructural Aspects of Premature Pitting Corrosion of Steel Pipe–Case Study

18. Using Finite Element Analysis to Assess and Prevent the Failure of Safety Critical Structures

19. Analysis of Chip Generation During Bar Rolling

20. Failure and Fracture Analysis of Austenitic Stainless Steel Marine Propeller Shaft

21. Hydrogen-Assisted Cracking Fracture Analysis using High-Speed Camera and Delayed Hydrogen Cracking Test

22. Failure Analysis of a Welded AISI321 Steel Bleed Air Connector of an Aircraft Engine

23. Failure Analysis and Mechanical Characterization of 3D Printed ABS With Respect to Layer Thickness and Orientation

24. Analysis of Premature Failure of a PVC Water Pipe

25. The Influence of Critical Flow Velocity on Corrosion of Stainless Steel

1. Metal Additive Manufacturing: A Review

2. Robust Metal Additive Manufacturing Process Selection and Development for Aerospace Components

3. Residual Stress and Distortion during Quench Hardening of Steels: A Review

4. Additive Manufacturing of Metallic Materials: A Review

5. A Comprehensive Examination of High-Temperature Hydrogen Attack—A Review of over a Century of Investigations

6. Correlation of Yield Strength and Tensile Strength with Hardness for Steels

7. Post-Process Treatments for Additive-Manufactured Metallic Structures: A Comprehensive Review

8. Corrosion, Corrosion Fatigue, and Protection of Magnesium Alloys: Mechanisms, Measurements, and Mitigation

9. Defects in Metal Additive Manufacturing Processes

10. Effects of Post-processing on the Surface Finish, Porosity, Residual Stresses, and Fatigue Performance of Additive Manufactured Metals: A Review

11. Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting

12. Aluminum-Copper-Lithium Alloy 2050 Developed for Medium to Thick Plate

13. Wire Arc Additive Manufacturing: A Comprehensive Review and Research Directions

14. Microstructure, Mechanical Properties, and Martensitic Transformation in NiTi Shape Memory Alloy Fabricated Using Electron Beam Additive Manufacturing Technique

15. Microstructure and Mechanical Properties of Ti-6Al-4V Manufactured by Selective Laser Melting after Stress Relieving, Hot Isostatic Pressing Treatment, and Post-Heat Treatment

16. 3D-Printed Objects for Multipurpose Applications

17. The State of the Art for Wire Arc Additive Manufacturing Process of Titanium Alloys for Aerospace Applications

18. Innovative and Highly Productive Joining Technologies for Multi-Material Lightweight Car Body Structures

19. Improved High-Temperature Aluminum Alloys Containing Cerium

20. A Review on Additive Manufacturing Processes of Inconel 625

21. Investigating the Dimensional Accuracy and Surface Roughness for 3D Printed Parts Using a Multi-jet Printer

22. Effect of Cooling Rate on Microstructure and Mechanical Properties of Thin-Walled Ductile Iron Castings

23. Beta Titanium Alloys Processed By Laser Powder Bed Fusion: A Review

24. Engineering Framework for Assessing Materials and Processes for In-Space Manufacturing

25. Fabrication of Al/Mg Bimetallic Thin-Walled Ultrafine-Grained Tube by Severe Plastic Deformation

1. The Onsager Reciprocity Relations Revisited

2. Molten Salts: Thermal Energy Storage and Heat Transfer Media

3. Diffusion Coefficients and Phase Equilibria of the Cu-Zn Binary System Studied Using Diffusion Couples

4. The Al-Rich Part of the Fe-Al Phase Diagram

5. Phase Diagrams: The Beginning of Wisdom

6. Phase Stability Through Machine Learning

7. The Cu–Sn System: A Comprehensive Review of the Crystal Structures of its Stable and Metastable Phases

8. A Revision of the Sb-Te Binary Phase Diagram and Crystal Structure of the Modulated γ-Phase Field

9. Splitting of γ′ Precipitates in the Context of Phase Equilibrium

10. Mean Field Modeling of Grain Growth and Zener Pinning

11. Experimental Study of the Ternary Phase Diagram Al–Ge–Mg

12. Stability of High Entropy Alloys to Spinodal Decomposition

13. Temperature-Dependent Configurational Entropy Calculations for Refractory High-Entropy Alloys

14. Experimental Investigation of Phase Relations and Thermodynamic Modelling of the Fe-Mn-Zr System

15. Phase Equilibria in the Ti-Rich Part of the Ti-Al-Nb System—Part I: Low-Temperature Phase Equilibria Between 700 and 900 °C

16. Measurement of Interdiffusion and Tracer Diffusion Coefficients in FCC Co-Cr-Fe-Ni Multi-Principal Element Alloy

17. Melting Point of Pure Cr and Phase Equilibria in the Cr-Si Binary System

18. A Systematic First-Principles Study of Computational Parameters Affecting Self-diffusion Coefficients in FCC Ag, Cu, and Ni

19. Simplified Growth Model for Multicomponent Systems - Inclusion of PARA and NPLE Conditions

20. Simple Approach for Evaluating the Possibility of Sluggish Diffusion in High-Entropy Alloys

21. Phase Equilibria in the Ti-Rich Part of the Ti-Al-Nb System—Part II: High-Temperature Phase Equilibria Between 1000 and 1300 °C

22. Zentropy Theory for Positive and Negative Thermal Expansion

23. Significant Figures and False Precision

24. The High-Temperature Cu-Fe-S System: Thermodynamic Analysis and Prediction of the Liquid–Solid Phase Range

25. An Ontological Basis for the Diffusion Theory

1. Thermal Spray High-Entropy Alloy Coatings: A Review

2. Beyond Traditional Coatings: A Review on Thermal-Sprayed Functional and Smart Coatings

3. A Critical Analysis of the Tensile Adhesion Test for Thermally Sprayed Coatings

4. A Review of Thermally Sprayed Polymer Coatings

5. Current Implementation Status of Cold Spray Technology: A Short Review

6. The 2016 Thermal Spray Roadmap

7. Cold Spray: Over 30 Years of Development Toward a Hot Future

8. The Bonding Formation during Thermal Spraying of Ceramic Coatings: A Review

9. Perspective: Challenges in the Aerospace Marketplace and Growth Opportunities for Thermal Spray

10. Thermally Sprayed Functional Coatings and Multilayers: A Selection of Historical Applications and Potential Pathways for Future Innovation

11. Suspension and Solution Precursor Plasma and HVOF Spray: A Review

12. Arc Plasma Torch Modeling

13. Thermal Spraying of Ultra-High Temperature Ceramics: A Review on Processing Routes and Performance

14. Microstructural, Mechanical and Wear Properties of Atmospheric Plasma-Sprayed and High-Velocity Oxy-Fuel AlCoCrFeNi Equiatomic High-Entropy Alloys (HEAs) Coatings

15. Wetting Behavior and Functionality Restoration of Cold-Sprayed Aluminum-Quasicrystalline Composite Coatings

16. Advances in Thermal Spray Coatings for Gas Turbines and Energy Generation: A Review

17. Advances in Corrosion-Resistant Thermal Spray Coatings for Renewable Energy Power Plants. Part I: Effect of Composition and Microstructure

18. From Particle Acceleration to Impact and Bonding in Cold Spraying

19. Effect of Cathode-Plasma Coupling on Plasma Torch Operation Predicted by a 3D Two-Temperature Electric Arc Model

20. Evaluation of New High Entropy Alloy as Thermal Sprayed Bondcoat in Thermal Barrier Coatings

21. Perspectives on Environmental Barrier Coatings (EBCs) Manufactured via Air Plasma Spray (APS) on Ceramic Matrix Composites (CMCs): A Tutorial Paper

22. Thermal Spray Coatings for Protection Against Microbiologically Induced Corrosion: Recent Advances and Future Perspectives

23. A Perspective on Thermally Sprayed Thermal Barrier Coatings: Current Status and Trends

24. Ceramic Top Coats of Plasma-Sprayed Thermal Barrier Coatings: Materials, Processes, and Properties

25. Steam Degradation of Ytterbium Disilicate Environmental Barrier Coatings: Effect of Composition, Microstructure and Temperature

1. Microstructural Development in Inconel 718 Nickel-Based Superalloy Additively Manufactured by Laser Powder Bed Fusion

2. Quenching and Partitioning Steel Heat Treatment

3. Heat Treating of Nonferrous Alloys

4. A Metallographic Review of 3D Printing/Additive Manufacturing of Metal and Alloy Products and Components

5. Early Efforts to Smelt Iron in Central Anatolia: Analysis of Iron Artefacts from the Bronze Age in Kaman-Kalehöyük

6. A New Metallographic Technique for Revealing Grain Boundaries in Aluminum Alloys

7. The Tensile Properties of Pearlite, Bainite, and Spheroidite

8. The Cast Aluminum Cap on the Washington Monument

9. Principles of Image Analysis

10. Effect of Cooling Rate on Phase Transformation Kinetics and Microstructure of Nb–Ti Microalloyed Low Carbon HSLA Steel

11. Duplex Steels: Part I: Genesis, Formation, Structure

12. Effect of Silicon Content on the Microstructure and Mechanical Properties of Dual-Phase Steels

13. Recrystallization, Grain Growth, and Color Etching to Design an Artistic Microstructure in Cartridge Brass (C26000)

14. Metallographic Investigation of the Bronze Sword from Vértesszőlős

15. Effect of Plasma Nitriding on Structure and Properties of Titanium Grade 2 Produced by Direct Metal Laser Sintering

16. The Importance of Science Communication

17. Development of a Heat Treating Process for 9254 Steel Used to Create the Winning Entry in the 2022 Heat Treating Society Strong Bar Competition

18. Geochemical Link Between Slag Inclusion and Hammerscale, a Potential New Tool to Better Understand the Iron Supply of an Archaeological Workshop

19. Comparative Study of Microstructure and Properties of Hypoeutectic Al-Si Alloys Being Cast With and Without Melt Thermal Treatment

20. Martensite Fractions Measured by XRD on Fracture Surfaces of Austenitic Stainless Steels Tensile Tested in Gaseous Helium and Hydrogen

21. Effect of Al Content on the Microstructure and Properties of As-Cast AlxCoCrCuFe Alloys

22. Duplex Steels. Part II: Carbides and Nitrides

23. Effect of Casting Thickness on the Solidification Characteristics and Microstructural Parameters of Near-Eutectic Al-Si Alloy Produced by Ablation Casting Process

24. Evaluation of the Applicability of Computer-Aided Porosity Testing Methods for Different Pore Structures

25. Microstructural Evaluation of Copper Brazed Joints Using Silver-Based Filler Metal

1. Fatigue, Fracture, and Crack Arrest from Bending Induced Pre-strain in Superelastic Nitinol

2. Pre-strain and Mean Strain Effects on the Fatigue Behavior of Superelastic Nitinol Medical Devices

3. Localized Plastic Deformation of Superelastic NiTi Wires in Tension

4. Thin-Film Superelastic Alloys for Stretchable Electronics

5. Additive Manufacturing of Binary Ni–Ti Shape Memory Alloys Using Electron Beam Powder Bed Fusion: Functional Reversibility Through Minor Alloy Modification and Carbide Formation

6. Caloric Effects Induced by Uniform and Non-uniform Stress in Shape-Memory Materials

7. Tensile Deformation of B19′ Martensite in Nanocrystalline NiTi Wires

8. Processing and Scalability of NiTiHf High-Temperature Shape Memory Alloys

9. Advancing Nitinol Implant Design and Simulation Through Data-Driven Methodologies

10. Applying Full-Field Measurement Techniques for the Thermomechanical Characterization of Shape Memory Alloys: A Review and Classification

11. Numerical Investigation on the Effect of Inclusions on the Local Fatigue Strain in Superelastic NiTi Alloy

12. Myths and Truths of Nitinol Mechanics: Elasticity and Tension–Compression Asymmetry

13. On the Importance of Structural and Functional Fatigue in Shape Memory Technology

14. Electron Beam Welding of Hot-Rolled Fe–Mn–Al–Ni Shape Memory Alloy Sheets

15. Building Orientation and Heat Treatments Effect on the Pseudoelastic Properties of NiTi Produced by LPBF

16. Coupled Finite Element Simulation of Shape Memory Bending Microactuator

17. The Effect of Increasing Chemical Complexity on the Mechanical and Functional Behavior of NiTi-Related Shape Memory Alloys

18. Functional Fatigue of NiTi Shape Memory Alloy: Effect of Loading Frequency and Source of Residual Strains

19. Fatigue-Resistant Heterogeneous Gradient Nanocrystalline NiTi Shape Memory Alloy Fabricated by Pre-Strain Laser Shock Peening

20. Analysis of the Local Functional Evolution in NiTi Shape Memory Alloys by Multicycle Nanoindentations

21. Finite Strain Constitutive Modelling of Shape Memory Alloys Considering Partial Phase Transformation with Transformation-Induced Plasticity

22. Damping Behavior in a Wide Temperature Range of FeMn-Like High Entropy Shape Memory Alloys

23. Unequally and Non-linearly Weighted Averaging Operators as a General Homogenization Approach for Phase Field Modeling of Phase Transforming Materials

24. Investigation and Composition Characterization of a “NiTi-like” Alloy Combining High Temperature Shape Memory and High Entropy

25. Effect of Crystallographic Orientation and Grain Boundaries on Martensitic Transformation and Superelastic Response of Oligocrystalline Fe–Mn–Al–Ni Shape Memory Alloys