1. Combustion Synthesis of TiB₂-TiC/42CrMo4 Composites with Gradient Joint Prepared in Different High-Gravity Fields

   • Xuegang Huang
   • Jie Huang
   • Junyan Wu

   OriginalPaper 29 October 2015 Pages: 4585 - 4593

   

2. Effects of Tungsten on Microstructure and Mechanical Properties of CrFeNiV_0.5W _x and CrFeNi₂V_0.5W _x High-Entropy Alloys

   • Hui Jiang
   • Li Jiang
   • Tingju Li

   OriginalPaper 29 October 2015 Pages: 4594 - 4600

   

3. Microstructure and Tensile Properties of Mg (AM60)/Al₂O₃ Metal Matrix Composites with Varying Volume Fractions of Fiber Reinforcement

   • Xuezhi Zhang
   • Li Fang
   • Henry Hu

   OriginalPaper 30 October 2015 Pages: 4601 - 4611

   

4. The Effect of Processing Parameters on the Performance of Spark Plasma Sintered cBN-WC-Co Composites

   • Cong Mao
   • Mingjun Zhang
   • Gaofeng Zhang

   OriginalPaper 30 October 2015 Pages: 4612 - 4619

   

5. Dislocation Configurations and Stress Distribution Along the Transverse Axis of Turbine Blade Body

   • Xianzi Lv
   • Fei Sun
   • Jianxin Zhang

   OriginalPaper 02 November 2015 Pages: 4620 - 4625

   

6. Corrosion Resistance of Electrogalvanized Steel Coated with PEG-Modified Ceria Layers in Chloride and Sulfate Media

   • Y. Hamlaoui
   • H. Boudellioua
   • F. Pedraza

   OriginalPaper 30 October 2015 Pages: 4626 - 4635

   

7. Corrosion Behavior of E690 High-Strength Steel in Alternating Wet-Dry Marine Environment with Different pH Values

   • W. Wu
   • W. K. Hao
   • W. J. Liao

   OriginalPaper 02 November 2015 Pages: 4636 - 4646

   

8. Hot Tensile Behavior and Self-consistent Constitutive Modeling of TA15 Titanium Alloy Sheets

   • Lei Yang
   • Baoyu Wang
   • Jing Zhou

   OriginalPaper 02 November 2015 Pages: 4647 - 4655

   

9. Preparation of the Multi-Walled Carbon Nanotubes/Nickel Composite Coating with Superior Wear and Corrosion Resistance

   • Xuewu Li
   • Yang Gu
   • Xingjiu Huang

   OriginalPaper 29 October 2015 Pages: 4656 - 4663

   

10. Fatigue Strength Prediction of Drilling Materials Based on the Maximum Non-metallic Inclusion Size

    • Dezhi Zeng
    • Gang Tian
    • Zhiying Ouyang

    OriginalPaper 04 November 2015 Pages: 4664 - 4672

    

11. Microstructure and Mechanical Properties of Cr-SiC Particles-Reinforced Fe-Based Alloy Coating

    • Fu-cheng Wang
    • Xiao-dong Du
    • Jian Shen

    ReviewPaper 04 November 2015 Pages: 4673 - 4680

    

12. Effects of Electron Beam Welding on Microstructure, Microhardness, and Electrical Conductivity of Cu-Cr-Zr Alloy Plates

    • P. K. C. Kanigalpula
    • Arya Chatterjee
    • J. Derose

    OriginalPaper 04 November 2015 Pages: 4681 - 4690

    

13. A DNA-Assembled Fe₃O₄@Ag Nanorod in Silica Matrix for Cholesterol Biosensing

    • R. K. Satvekar
    • A. P. Tiwari
    • S. H. Pawar

    OriginalPaper 09 November 2015 Pages: 4691 - 4695

    

14. Complexes of Imidazole with Poly(ethylene glycol) as a Corrosion Inhibitor for Carbon Steel in Sulphuric Acid

    • Saeed Salimi
    • Mojtaba Nasr-Esfahani
    • Ehsan Saebnoori

    OriginalPaper 05 November 2015 Pages: 4696 - 4709

    

15. In Situ Tensile Deformation and Residual Stress Measurement by Neutron Diffraction in Modified 9Cr-1Mo Steel

    • Triratna Shrestha
    • Indrajit Charit
    • Gabriel Potirniche

    OriginalPaper 06 November 2015 Pages: 4710 - 4720

    

16. Studies on Dynamic Elastic and Internal Friction Properties of Cu-Cr-Zr-Ti Alloy Between 25 and 650 °C

    • K. Saravanan
    • V. M. J. Sharma
    • Koshy M. George

    OriginalPaper 11 November 2015 Pages: 4721 - 4727

    

17. An Investigation into Hot Deformation Characteristics and Processing Maps of High-Strength Armor Steel

    • Ravindranadh Bobbili
    • V. Madhu

    OriginalPaper 11 November 2015 Pages: 4728 - 4735

    

18. Corrosion Investigations of Black Chromite Films on Zn and Zn-Co Coatings with Low Cobalt Content

    • Nikolai Boshkov
    • Neli Boshkova
    • Ludmil Lutov

    OriginalPaper 11 November 2015 Pages: 4736 - 4745

    

19. Investigation of the Microstructure and the Mechanical Properties of Cu-Ni_C Composite Produced by Accumulative Roll Bonding and Coating Processes

    • Ali Shabani
    • Mohammad Reza Toroghinejad

    OriginalPaper 13 November 2015 Pages: 4746 - 4754

    

20. Effects of V Addition on Microstructure and Hardness of Fe-C-B-Ni-V Hardfacing Alloys Cast on Steel Substrates

    • L. Rovatti
    • J. N. Lemke
    • M. Vedani

    OriginalPaper 16 November 2015 Pages: 4755 - 4763

    

21. Characterization of Time-Dependent Behavior of Ramming Paste Used in an Aluminum Electrolysis Cell

    • Sakineh Orangi
    • Donald Picard
    • Mario Fafard

    OriginalPaper 17 November 2015 Pages: 4764 - 4776

    

22. Decomposition Kinetics of Ferrite in Isothermally Aged SAF 2507-Type Duplex Stainless Steel

    • Tibor Berecz
    • Éva Fazakas
    • István Sajó

    OriginalPaper 17 November 2015 Pages: 4777 - 4788

    

23. The Effect of Al₂Cu Precipitate Size on Microstructure and Mechanical Properties of Al-2 wt.%Cu Alloys Fabricated by ARB

    • B. Azad
    • E. Borhani

    OriginalPaper 18 November 2015 Pages: 4789 - 4796

    

24. Corrosion Inhibition Performance of Triazole Derivatives on Copper-Nickel Alloy in 3.5 wt.% NaCl Solution

    • B. Jiang
    • S. L. Jiang
    • Y. G. Zheng

    OriginalPaper 20 November 2015 Pages: 4797 - 4808

    

25. Processing and Optimization of Dissimilar Friction Stir Welding of AA 2219 and AA 7039 Alloys

    • D. Venkateswarlu
    • P. Nageswara rao
    • N. R. Mandal

    OriginalPaper 23 November 2015 Pages: 4809 - 4824

    

26. Preparation, Characterization, and Millimeter Wave Attenuation of Carbon Fibers Coated with Ni-Cu-P and Ni-Co-P Alloys

    • Mingquan Ye
    • Zhitao Li
    • Aijun Han

    OriginalPaper 23 November 2015 Pages: 4825 - 4834

    

27. Electroless Ni-P/SiC Nanocomposite Coatings With Small Amounts of SiC Nanoparticles for Superior Corrosion Resistance and Hardness

    • Mohammad Islam
    • Muhammad Rizwan Azhar
    • T. David Burleigh

    OriginalPaper 24 November 2015 Pages: 4835 - 4843

    

28. Interfacial Reaction and Shear Strength of SnAgCu/Ni/Bi₂Te₃-Based TE Materials During Aging

    • Hongyang Jing
    • Yuan Li
    • Hao Zhang

    OriginalPaper 24 November 2015 Pages: 4844 - 4852

    

29. Effects of Carbon and Nitrogen on the Microstructure and Mechanical Properties of Carbonitrided Low-Carbon Steel

    • Nipon Taweejun
    • Chaosuan Kanchanomai

    OriginalPaper 30 October 2015 Pages: 4853 - 4862

    

30. Oxidation Behavior of Zr₄₃Cu₄₅Al₁₂ Bulk Metallic Glass at 400-525 °C in Air Atmosphere

    • J. Dąbrowa
    • L. Perriere
    • M. Danielewski

    OriginalPaper Open access 02 November 2015 Pages: 4863 - 4869

    

31. Improved Stress Corrosion Cracking Resistance and Strength of a Two-Step Aged Al-Zn-Mg-Cu Alloy Using Taguchi Method

    • Lianghua Lin
    • Zhiyi Liu
    • Meng Liu

    OriginalPaper 13 November 2015 Pages: 4870 - 4877

    

32. Precision Measurement and Modeling of Quenching-Tempering Distortion in Low-Alloy Steel Components with Internal Threads

    • Zhenguo Nie
    • Gang Wang
    • Yiming (Kevin) Rong

    OriginalPaper 24 November 2015 Pages: 4878 - 4889

    

33. The Effect of High-Pressure Devitrification and Densification on Ballistic-Penetration Resistance of Fused Silica

    • M. Grujicic
    • V. Avuthu
    • R. Galgalikar

    OriginalPaper 02 November 2015 Pages: 4890 - 4907

    

34. Simulating Intergranular Stress Corrosion Cracking in AZ31 Using Three-Dimensional Cohesive Elements for Grain Structure

    • J. Zhang
    • Z. H. Chen
    • C. F. Dong

    OriginalPaper 02 November 2015 Pages: 4908 - 4918

    

35. Investigation into the Effect of Concentration of Benzotriazole on the Selective Layer Surface in the Chemical Mechanical Planarization Process

    • Filip Ilie
    • Tiberiu Laurian

    OriginalPaper 05 November 2015 Pages: 4919 - 4927

    

36. Numerical Simulation of Residual Stress in an Al-Cu Alloy Block During Quenching and Aging

    • Ya-Bo Dong
    • Wen-Zhu Shao
    • Liang Zhen

    OriginalPaper 16 November 2015 Pages: 4928 - 4940

    

37. Mechanical Behavior of a NiTi Endodontic File During Insertion in an Anatomic Root Canal Using Numerical Simulations

    • V. Legrand
    • S. Moyne
    • R. Arbab Chirani

    OriginalPaper 16 November 2015 Pages: 4941 - 4947

    

38. The Numerical and Experimental Investigation of the Multi-layer Laser-MIG Hybrid Welding for Fe36Ni Invar Alloy

    • Xiaohong Zhan
    • Yun Liu
    • Yanhong Wei

    OriginalPaper 25 November 2015 Pages: 4948 - 4957

    

39. Effect of Pre-intercritical Annealing Treatments on the Microstructure and Mechanical Properties of 0.33% Carbon Dual-Phase Steel

    • Neha Shukla
    • Suvajeet Das
    • Bijay Kumar Show

    OriginalPaper 02 November 2015 Pages: 4958 - 4965

    

40. Comparing Rotary Bend Wire Fatigue Test Methods at Different Test Speeds

    • Jason D. Weaver
    • Erick J. Gutierrez

    OriginalPaper 30 October 2015 Pages: 4966 - 4974

    

41. Studies on Adsorption and Corrosion Inhibitive Properties of Indoline Compounds on N80 Steel in Hydrochloric Acid

    • M. Yadav
    • T. K. Sarkar
    • Taniya Purkait

    OriginalPaper 30 October 2015 Pages: 4975 - 4984

    

42. Corrosion Behavior of Sintered NdFeB Magnets Coated with Ni Coatings Deposited by Ion Beam Sputtering

    • Sheng-qing Hu
    • Kun Peng
    • Hong Chen

    OriginalPaper 03 November 2015 Pages: 4985 - 4990

    

43. Characterization of Nitinol Laser-Weld Joints by Nondestructive Testing

    • Markus Wohlschlögel
    • Gunter Gläßel
    • Peter Mayr

    OriginalPaper 06 November 2015 Pages: 4991 - 4996

    

44. Inhibitive Performance of Benzotriazole for Steel Corrosion Studied by Electrochemical and AFM Characterization

    • Yuanchao Feng
    • Y. Frank Cheng

    OriginalPaper 20 November 2015 Pages: 4997 - 5001

    

45. Hot Deformation Behaviors and Processing Maps of 2024 Aluminum Alloy in As-cast and Homogenized States

    • Liang Chen
    • Guoqun Zhao
    • Mengmeng Chen

    OriginalPaper 03 November 2015 Pages: 5002 - 5012

    

46. Ultrathin to Nano Thickness TiN Coatings: Processing, Structural, Mechanical Behavior

    • S. K. Mishra
    • Rakesh Kumar
    • L. C. Pathak

    OriginalPaper 02 November 2015 Pages: 5013 - 5021

    

47. Study on Microstructure and Electrochemical Corrosion Behavior of PEO Coatings Formed on Aluminum Alloy

    • N. Xiang
    • R. G. Song
    • Y. Xiong

    OriginalPaper 29 October 2015 Pages: 5022 - 5031

    

48. Effect of Viscosity Measurement Method to Simulate High Pressure Die Casting of Thin-Wall AlSi10MnMg Alloy Castings

    • B. W. Zhu
    • L. X. Li
    • R. Xu

    OriginalPaper 02 November 2015 Pages: 5032 - 5036

    

49. The Effect of SiC Particle Addition During FSW on Microstructure and Mechanical Properties of AZ31 Magnesium Alloy

    • M. Abbasi
    • A. Abdollahzadeh
    • H. Omidvar

    OriginalPaper 02 November 2015 Pages: 5037 - 5045

    

50. Effect of Reprocessing and Accelerated Weathering on Impact-Modified Recycled Blend

    • V. Ramesh
    • Smita Mohanty
    • Sanjay K. Nayak

    OriginalPaper 04 November 2015 Pages: 5046 - 5053