1. Texture and Tempered Condition Combined Effects on Fatigue Behavior in an Al-Cu-Li Alloy

   • An Wang
   • Zhiyi Liu
   • Rongxian Yang

   OriginalPaper 15 May 2017 Pages: 2453 - 2458

   

2. Influence of Zinc on Coarsening of δ-Ni₂Si Particles, Aging Behavior and Hardness in a Cu-Ni-Si Alloy

   • Wei Chen
   • Zhou Li
   • Mingpu Wang

   OriginalPaper 18 May 2017 Pages: 2459 - 2464

   

3. Morphology, Structure, Microhardness and Corrosion Resistance of Ni-W Coating Annealed in Hydrogen and Argon Atmosphere

   • Qiongyu Zhou
   • Wei Xie
   • Xiaofen Wang

   OriginalPaper 22 May 2017 Pages: 2465 - 2471

   

4. Sources of Variability and Lower Values in Toughness Measurements of Weld Metals

   • R. Cao
   • J. J. Yuan
   • J. H. Chen

   OriginalPaper 20 April 2017 Pages: 2472 - 2483

   

5. A Comparison Between Corrosion Behaviors of Fine-Grained and Coarse-Grained Structures of High-Mn Steel in NaCl Solution

   • M. Yeganeh
   • M. Eskandari
   • S. R. Alavi-Zaree

   OriginalPaper 21 April 2017 Pages: 2484 - 2490

   

6. Determination of 200 °C Isothermal Section of Al-Ag-Ga Phase Diagram by Microanalysis, X-ray Diffraction, Hardness and Electrical Conductivity Measurements

   • Milena Premović
   • Milica Tomović
   • Aleksandar Đorđević

   OriginalPaper 24 April 2017 Pages: 2491 - 2501

   

7. Effect of Immersion Time and Cooling Mode on the Electrochemical Behavior of Hot-Dip Galvanized Steel in Sulfuric Acid Medium

   • Choukri Lekbir
   • Nessrine Dahoun
   • Amar Djadoun

   OriginalPaper 25 April 2017 Pages: 2502 - 2511

   

8. Influence of Sulfur Content on the Corrosion Resistance of 17-4PH Stainless Steel

   • S. S. M. Tavares
   • J. M. Pardal
   • M. R. da Silva

   OriginalPaper 26 April 2017 Pages: 2512 - 2519

   

9. Characterization of Thermal, Mechanical and Tribological Properties of Fluoropolymer Composite Coatings

   • Y. He
   • K. Farokhzadeh
   • A. Edrisy

   ReviewPaper 27 April 2017 Pages: 2520 - 2534

   

10. Investigation into Corrosion Pit-to-Fatigue Crack Transition in 7075-T6 Aluminum Alloy

    • V. Sabelkin
    • S. Mall
    • H. Misak

    OriginalPaper 01 May 2017 Pages: 2535 - 2541

    

11. Effect of Temperature on Microstructure and Fracture Mechanisms in Friction Stir Welded Al6061 Joints

    • A. Dorbane
    • G. Ayoub
    • A. Imad

    OriginalPaper 02 May 2017 Pages: 2542 - 2554

    

12. Corrosion Resistance of Cordierite-Modified Light MMCs

    • A. Szewczyk-Nykiel
    • P. Długosz
    • M. Hebda

    OriginalPaper Open access 02 May 2017 Pages: 2555 - 2562

    

13. Hard and Corrosion-Resistant Ni-xAl-yTi Nanocomposite Coatings for CNT/Al Composites

    • Yuantao Zhao
    • Chengxi Wang
    • Chuanhai Jiang

    OriginalPaper 08 May 2017 Pages: 2563 - 2571

    

14. Effect of Annealing Treatments on the Microstructure, Mechanical Properties and Corrosion Behavior of Direct Metal Laser Sintered Ti-6Al-4V

    • Yangzi Xu
    • Yuan Lu
    • Richard D. Sisson Jr.

    OriginalPaper 08 May 2017 Pages: 2572 - 2582

    

15. Effects of Casting Size on Microstructure and Mechanical Properties of Spheroidal and Compacted Graphite Cast Irons: Experimental Results and Comparison with International Standards

    • L. Ceschini
    • Alessandro Morri
    • Andrea Morri

    OriginalPaper 09 May 2017 Pages: 2583 - 2592

    

16. Thermal Stability and Coefficient of Friction of the Diamond Composites with the Titanium Compound Bonding Phase

    • S. Cygan
    • L. Jaworska
    • P. Klimczyk

    OriginalPaper Open access 10 May 2017 Pages: 2593 - 2598

    

17. Corrosion Behavior of Low-C Medium-Mn Steel in Simulated Marine Immersion and Splash Zone Environment

    • Dazheng Zhang
    • Xiuhua Gao
    • Jun Hu

    OriginalPaper 11 May 2017 Pages: 2599 - 2607

    

18. Wear Behavior of Harmonic Structured 304L Stainless Steel

    • Prabhat K. Rai
    • S. Shekhar
    • K. Mondal

    OriginalPaper 12 May 2017 Pages: 2608 - 2618

    

19. Effect of Dynamic Change in Strain Rate on Mechanical and Stress Corrosion Cracking Behavior of a Mild Steel

    • Govinda Krishnan
    • A. Varshney
    • K. Mondal

    OriginalPaper 15 May 2017 Pages: 2619 - 2631

    

20. Development of a Non-collinear Nonlinear Ultrasonic-Based Technique for the Assessment of Crack Tip Deformation

    • P. Muhammed Thanseer
    • Avijit Kr. Metya
    • S. Palit Sagar

    OriginalPaper 16 May 2017 Pages: 2632 - 2639

    

21. Environmental Stability and Long-Term Durability of Superhydrophobic Coatings on Titanium

    • S. C. Vanithakumari
    • R. P. George
    • U. Kamachi Mudali

    OriginalPaper 18 May 2017 Pages: 2640 - 2648

    

22. Microstructures and Mechanical Properties of Steel/Aluminum Alloy Joints Welded by Resistance Spot Welding

    • Yueying Zhang
    • Daqian Sun

    OriginalPaper 19 May 2017 Pages: 2649 - 2662

    

23. Alumina-Silica Composite Coatings on Aluminum by Plasma Electrolytic Oxidation: The Effect of Coating Time on Microstructure, Phase, and Corrosion Behavior

    • A. Khakzad
    • S. M. Mousavi Khoi
    • H. Maleki-Ghaleh

    OriginalPaper 22 May 2017 Pages: 2663 - 2670

    

24. Deformation Heterogeneity and Texture Evolution of NiTiFe Shape Memory Alloy Under Uniaxial Compression Based on Crystal Plasticity Finite Element Method

    • Yulong Liang
    • Shuyong Jiang
    • Chengzhi Zhao

    OriginalPaper 20 April 2017 Pages: 2671 - 2682

    

25. Modification of Rule of Mixtures for Estimation of the Mechanical Properties of Dual-Phase Steels

    • Mohammad Alibeyki
    • Hamed Mirzadeh
    • Alireza Kalhor

    OriginalPaper 20 April 2017 Pages: 2683 - 2688

    

26. Research on the Stress and Material Flow with Single Particle—Simulations and Experiments

    • Tao Zhang
    • Feng Jiang
    • Xipeng Xu

    OriginalPaper 24 April 2017 Pages: 2689 - 2697

    

27. Dynamic Recrystallization Kinetics of Cu-0.36Cr-0.03Zr Alloy During Hot Compression

    • Guoliang Ji
    • Fangli Qin
    • Lei Li

    OriginalPaper 01 May 2017 Pages: 2698 - 2707

    

28. Calculation of Crystallographic Texture of BCC Steels During Cold Rolling

    • Arpan Das

    OriginalPaper 04 May 2017 Pages: 2708 - 2720

    

29. The Effects of Stress State on the Strain Hardening Behaviors of TWIP Steel

    • F. Liu
    • W. J. Dan
    • W. G. Zhang

    OriginalPaper 10 May 2017 Pages: 2721 - 2728

    

30. Modeling and Characterization of Cyclic Shape Memory Behaviors of the Binary Ni_49.9Ti_50.1 Material System

    • A. F. Saleeb
    • S. H. Natsheh
    • B. Dhakal

    OriginalPaper 15 May 2017 Pages: 2729 - 2741

    

31. Effect of Post-weld Heat Treatment on the Fatigue and Fracture Mechanisms of Weld-Repaired Bisplate80 With or Without a Buffer Layer

    • Chunguo Zhang
    • Cuiping Ren
    • Pengmin Lu

    OriginalPaper 13 April 2017 Pages: 2742 - 2753

    

32. Creep Behavior of ABS Polymer in Temperature–Humidity Conditions

    • Teagen An
    • Ramya Selvaraj
    • Naksoo Kim

    OriginalPaper 20 April 2017 Pages: 2754 - 2762

    

33. Effects of H₂S/HS⁻ on Stress Corrosion Cracking Behavior of X100 Pipeline Steel Under Simulated Sulfate-Reducing Bacteria Metabolite Conditions

    • Q. Liu
    • Z. Li
    • S. Q. Wang

    OriginalPaper 20 April 2017 Pages: 2763 - 2775

    

34. Tribological Behavior of γ-TiAl Matrix Composites with Different Contents of Multilayer Graphene

    • Zhao Yan
    • Qiao Shen
    • Zhihai Wang

    OriginalPaper 20 April 2017 Pages: 2776 - 2783

    

35. Influence of Severe Shot Peening on the Surface State and Ultra-High-Cycle Fatigue Behavior of an AW 7075 Aluminum Alloy

    • Libor Trško
    • Mario Guagliano
    • Zuzana Florková

    OriginalPaper 20 April 2017 Pages: 2784 - 2797

    

36. Laboratory and Performance Studies of Anti-wear Coatings Deposited on Nitrided Surfaces of Tools used in an Industrial Hot Die Forging Process

    • Marek Hawryluk
    • Paweł Widomski
    • Zbigniew Gronostajski

    OriginalPaper 28 April 2017 Pages: 2798 - 2813

    

37. Characterization of Plastic Deformation Behavior of a Thermally Aged Duplex Stainless Steel

    • Gang Liu
    • Yanli Wang
    • Xitao Wang

    OriginalPaper 01 May 2017 Pages: 2814 - 2825

    

38. Fatigue Behavior of Ultrafine-Grained 5052 Al Alloy Processed Through Different Rolling Methods

    • K. K. Yogesha
    • Amit Joshi
    • R. Jayaganthan

    OriginalPaper 02 May 2017 Pages: 2826 - 2836

    

39. Effect of Hydrogen Charging on the Stress Corrosion Behavior of 2205 Duplex Stainless Steel Under 3.5 wt.% NaCl Thin Electrolyte Layer

    • Tianliang Zhao
    • Zhiyong Liu
    • Xiaogang Li

    OriginalPaper 08 May 2017 Pages: 2837 - 2846

    

40. Microstructure and Mechanical Properties of Dissimilar Friction Stir Spot Welding Between St37 Steel and 304 Stainless Steel

    • Ali Khodadadi
    • Morteza Shamanian
    • Fathallah Karimzadeh

    OriginalPaper 09 May 2017 Pages: 2847 - 2858

    

41. Rolling Contact Fatigue Failure Mechanisms of Plasma-Nitrided Ductile Cast Iron

    • D. Wollmann
    • G. P. P. P. Soares
    • J. C. K. Neves

    OriginalPaper 09 May 2017 Pages: 2859 - 2868

    

42. Study on the Quality and Performance of CoCrMo Alloy Parts Manufactured by Selective Laser Melting

    • Zhang Guoqing
    • Yang Yongqiang
    • Zhang Zimian

    OriginalPaper 11 May 2017 Pages: 2869 - 2877

    

43. SiC Nanoparticles Toughened-SiC/MoSi₂-SiC Multilayer Functionally Graded Oxidation Protective Coating for Carbon Materials at High Temperatures

    • Alireza Abdollahi
    • Naser Ehsani
    • Ali Khalifesoltani

    OriginalPaper 11 May 2017 Pages: 2878 - 2889

    

44. Low Velocity Impact Behavior of Basalt Fiber-Reinforced Polymer Composites

    • Farzin Azimpour Shishevan
    • Hamid Akbulut
    • M. A. Mohtadi-Bonab

    OriginalPaper 11 May 2017 Pages: 2890 - 2900

    

45. Effects of Heat Treatment on the Discharge Behavior of Mg-6wt.%Al-1wt.%Sn Alloy as Anode For Magnesium-Air Batteries

    • Hanqing Xiong
    • Hualong Zhu
    • Yu Zhang

    OriginalPaper 16 May 2017 Pages: 2901 - 2911

    

46. Effect of the Addition of Zn on the Microstructure and Mechanical Properties of 5083 Alloy

    • Jianchao Shi
    • Hongjie Luo
    • Guangchun Yao

    OriginalPaper 19 May 2017 Pages: 2912 - 2918

    

47. Fabrication and Mechanical Characterization of Cold Extruded Aluminum Bronze Planar Microsprings

    • Jiuming Lv
    • Fangyi Hu
    • Xinping Zhang

    OriginalPaper 20 April 2017 Pages: 2919 - 2927

    

48. Influence of Al₂O₃ Nanoparticles on Microstructure and Strengthening Mechanism of Al-Based Nanocomposites Produced via Spark Plasma Sintering

    • B. Sadeghi
    • M. Shamanian
    • A. Rizzo

    OriginalPaper 26 April 2017 Pages: 2928 - 2936

    

49. Mechanical Properties and Microstructural Evolution of Variable-Plane-Rolled Mg-3Al-1Zn Alloy

    • Rong Zhu
    • Cunjian Bian
    • Yanjun Wu

    OriginalPaper 28 April 2017 Pages: 2937 - 2946

    

50. Effect of Mn Content on Microstructure and Mechanical Properties of Weld Metal During High Heat Input Welding Processes

    • F. Y. Song
    • M. H. Shi
    • R. D. K. Misra

    OriginalPaper 02 May 2017 Pages: 2947 - 2953