1. The influence of the chemical composition of hydrogels on their behavior in cementitious materials

   • Khashayar Farzanian
   • Babak Vafaei
   • Ali Ghahremaninezhad

   Original Article 15 December 2021 Article: 244

   

2. Comparison of thermal cracking potential evaluation criteria for mass concrete structures

   • Jianda Xin
   • Yi Liu
   • Juan Wang

   Original Article 15 December 2021 Article: 243

   

3. A damage bond model to investigate the damage and crack propagation for cemented materials and parametric analysis

   • Zhiyuan Ning
   • Yunhe Liu
   • Jing Dong

   Original Article 14 December 2021 Article: 242

   

4. Development of an energy-based framework to determine the surface free energy of asphalt binder: theoretical models

   • Zhe “Alan” Zeng
   • Derun Zhang
   • Hanqi Liu

   Original Article 13 December 2021 Article: 241

   

5. Reactive transport modelling of concrete subject to de-icing salts and atmospheric carbonation

   • Meijie Xie
   • Patrick Dangla
   • Kefei Li

   Original Article 13 December 2021 Article: 240

   

6. Thermomechanical behavior of granite under 150 °C: experimental and numerical analysis

   • Hamza Samouh
   • Shunsuke Ishikawa
   • Ippei Maruyama

   Original Article 07 December 2021 Article: 239

   

7. New insights into the role of MWCNT in cement hydration

   • Shaoqiang Meng
   • Xiaowei Ouyang
   • Guang Ye

   Original Article 02 December 2021 Article: 238

   

8. Correction to: Durability properties of high volume fly ash concrete containing nano-silica

   • Steve Wilben Macquarie Supit
   • Faiz Uddin Ahmed Shaikh

   Correction 01 December 2021 Article: 237

9. Quantitative analysis of steel fiber-matrix ITZ and multi-scale enhancement mechanism of SFRC

   • Zhenyu Pi
   • Huigang Xiao
   • Min Liu

   Original Article 30 November 2021 Article: 236

   

10. Fatigue behavior and phenomenological modeling of porous asphalt concrete under freeze–thaw cycling

    • Han-Cheng Dan
    • Chongyu Ling
    • Jin Liu

    Original Article 29 November 2021 Article: 235

    

11. 3D printing as an automated manufacturing method for a carbon fiber-reinforced cementitious composite with outstanding flexural strength (105 N/mm²)

    • Matthias Rutzen
    • Michael Schulz
    • Dirk Volkmer

    Original Article Open access 29 November 2021 Article: 234

    

12. Long term correlation between concrete cracking and corrosion in natural marine micro-environments

    • Pedro Castro-Borges
    • Andrés Antonio Torres-Acosta
    • Mercedes Guadalupe Balancán-Zapata

    Original Article 27 November 2021 Article: 233

    

13. Effect of elevated temperatures on the residual durability-related performance of concrete

    • André Valente Monteiro
    • Manuel Vieira

    Original Article 26 November 2021 Article: 232

    

14. Evaluation of internal bleeding in concrete foundation from the Terzaghi’s effective stress postulate

    • Abdul Rahman El Zein
    • Yannick Vanhove
    • Philippe Gotteland

    Original Article 24 November 2021 Article: 231

    

15. Combining the bi-objective approach and conditional coring for a reliable estimation of on-site concrete strength variability

    • Zoubir-Mehdi Sbartaï
    • Maitham Alwash
    • Vincenza A. M. Luprano

    Original Article 24 November 2021 Article: 230

    

16. The theoretical basis of testing methods to determine double-K criterion for crack propagation in concrete: technical report of the RILEM TC265-TDK

    • Shilang Xu
    • Qinghua Li
    • Shaowei Hu

    RILEM TC 265-TDK: Testing methods for determination of the double-K criterion for crack propagation in concrete 22 November 2021 Article: 229

    

17. A pipeline for enhanced multimodal 2D imaging of concrete structures

    • Sina Mehdinia
    • Thomas Schumacher
    • Eric Wan

    Original Article 22 November 2021 Article: 228

    

18. Influential factors for double-K fracture parameters analyzed by the round robin tests of RILEM TC265-TDK

    • Shilang Xu
    • Qinghua Li
    • Shaowei Hu

    RILEM TC 265-TDK: Testing methods for determination of the double-K criterion for crack propagation in concrete 22 November 2021 Article: 227

    

19. The direct shear behavior of recycled lump concrete

    • Zhen Li
    • Bo Wu

    Original Article 20 November 2021 Article: 226

    

20. Experimental assessment and modeling of fracture and fatigue resistance of aged stone matrix asphalt (SMA) mixtures containing RAP materials and warm-mix additive using ANFIS method

    • Seyed Ataollah Saed
    • Neda Kamboozia
    • Bernhard Hofko

    Original Article 20 November 2021 Article: 225

    

21. A multi-level investigation on the mechanical response of TRM-strengthened masonry

    • Ali Dalalbashi
    • Bahman Ghiassi
    • Daniel V. Oliveira

    Original Article Open access 20 November 2021 Article: 224

    

22. Modification of recycled aggregate by spraying colloidal nano silica and silica fume

    • Long Li
    • Dongxing Xuan
    • Chi Sun Poon

    Original Article 16 November 2021 Article: 223

    

23. Correction to: Adjudging efficacy of geonet reinforcement on the seismic performance of brick masonry structures: an experimental study

    • Susanta Banerjee
    • Sanket Nayak
    • Sreekanta Das

    Correction 15 November 2021 Article: 222

24. Results of round-robin testing for determining the double-K fracture parameters for crack propagation in concrete: technical report of the RILEM TC265-TDK

    • Shilang Xu
    • Qinghua Li
    • Shaowei Hu

    RILEM TC 265-TDK: Testing methods for determination of the double-K criterion for crack propagation in concrete 15 November 2021 Article: 221

    

25. RILEM Standard: testing methods for determination of the double-K criterion for crack propagation in concrete using wedge-splitting tests and three-point bending beam tests, recommendation of RILEM TC265-TDK

    • Shilang Xu
    • Qinghua Li
    • Shaowei Hu

    RILEM TC 265-TDK: Testing methods for determination of the double-K criterion for crack propagation in concrete Open access 15 November 2021 Article: 220

    

26. Assessment of the post-fire residual bearing capacity of FRC and hybrid RC-FRC tunnel sections considering thermal spalling

    • Ramoel Serafini
    • Albert de La Fuente
    • Antonio D. de Figueiredo

    Original Article 14 November 2021 Article: 219

    

27. Laboratory assessment of the contribution of aggressive to concrete chemical compounds to the degradation of Portland cement-based materials during anaerobic digestion

    • Marie Giroudon
    • Matthieu Peyre Lavigne
    • Alexandra Bertron

    Original Article 13 November 2021 Article: 218

    

28. The micro-structural character of limestone and its influence on the formation of phases in calcined products: natural hydraulic limes and cements

    • Petr Kozlovcev
    • Jan Válek

    Original Article 12 November 2021 Article: 217

    

29. External sulfate attack: comparison of several alternative binders

    • Laura Diaz Caselles
    • Julie Hot
    • Martin Cyr

    Original Article 12 November 2021 Article: 216

    

30. Experimental investigation of nonlinear flow characteristics in cracked polypropylene fibre-reinforced concrete

    • Weili Ma
    • Zengguang Xu
    • Heng Zhou

    Original Article 11 November 2021 Article: 215

    

31. Chloride binding in concrete: recent investigations and recognised knowledge gaps: RILEM Robert L’Hermite Medal Paper 2021

    • Klaartje De Weerdt

    Original Article Open access 11 November 2021 Article: 214

    

32. Adjudging efficacy of geonet reinforcement on the seismic performance of brick masonry structures: an experimental study

    • Susanta Banerjee
    • Sanket Nayak
    • Sreekanta Das

    Original Article 07 November 2021 Article: 213

    

33. The influence of calcium sulfate content on the hydration of belite-calcium sulfoaluminate cements with different clinker phase compositions

    • Maruša Mrak
    • Frank Winnefeld
    • Sabina Dolenec

    Original Article Open access 05 November 2021 Article: 212

    

34. Mechanical and durability properties of concrete subjected to early-age freeze–thaw cycles

    • Dongyun Liu
    • Yongming Tu
    • Lennart Elfgren

    Original Article 04 November 2021 Article: 211

    

35. Load-deformation behaviour of weft-knitted textile reinforced concrete in uniaxial tension

    • Minu Lee
    • Jaime Mata-Falcón
    • Walter Kaufmann

    Original Article Open access 04 November 2021 Article: 210

    

36. Flow behavior of cementitious-like suspension with nano-Fe₃O₄ particles under external magnetic field

    • Dengwu Jiao
    • Karel Lesage
    • Geert De Schutter

    Original Article Open access 01 November 2021 Article: 209

    

37. A test procedure for evaluating the impact behaviour of fibre reinforced concrete

    • Juan Carlos Vivas
    • Raúl Zerbino
    • Graciela Giaccio

    Original Article 29 October 2021 Article: 208

    

38. Early-age creep behaviour of 3D printable mortars: Experimental characterisation and analytical modelling

    • Laura Esposito
    • Lorenzo Casagrande
    • Ferdinando Auricchio

    Original Article Open access 29 October 2021 Article: 207

    

39. Recommendation of RILEM TC 258-AAA: RILEM AAR-0 outline guide to the use of RILEM methods in the assessment of the alkali-reactivity potential of concrete

    • Terje F. Rønning
    • Børge Johannes Wigum
    • Ian Sims

    RILEM TC 258-AAA: RECOMMENDATIONS FOR AVOIDING ALKALI AGGREGATE REACTIONS IN CONCRETE – PERFORMANCE BASED CONCEPT Open access 26 October 2021 Article: 206

    

40. Recommendation of RILEM TC 258-AAA: RILEM AAR-8: determination of potential releasable alkalis by aggregates in concrete

    • Esperanza Menéndez
    • António Santos Silva
    • Josée Duchesne

    RILEM TC 258-AAA: Recommendations for Avoiding Alkali Aggregate Reactions in Concrete – Performance Based Concept 26 October 2021 Article: 205

    

41. Recommendation of RILEM TC 258-AAA: RILEM AAR-10: determination of binder combinations for non-reactive mix design using concrete prisms–38 °C test method

    • Terje F. Rønning
    • Børge Johannes Wigum
    • Jan Lindgård

    RILEM TC 258-AAA: Recommendations for Avoiding Alkali Aggregate Reactions 25 October 2021 Article: 204

    

42. Recommendation of RILEM TC 258-AAA: RILEM AAR-11: determination of binder combinations for non-reactive mix design or the resistance to alkali-silica reaction of concrete mixes using concrete prisms − 60 °C test method

    • Ingmar Borchers
    • Jan Lindgård
    • Børge Johannes Wigum

    RILEM TC 258-AAA: Recommendations for Avoiding Alkali Aggregate Reactions in Concrete – Performance Based Concept 25 October 2021 Article: 203

    

43. Recommendation of RILEM TC 258-AAA: RILEM AAR-12: determination of binder combinations for non-reactive mix design or the resistance to alkali-silica reaction of concrete mixes using concrete prisms − 60 °C test method with alkali supply

    • Ingmar Borchers

    RILEM TC 258-AAA: Recommendations for Avoiding Alkali Aggregate Reactions in Concrete – Performance Based Concept 25 October 2021 Article: 202

    

44. Recommendation of RILEM TC 258-AAA: RILEM AAR-13: application of alkali-wrapping for concrete prism testing to assess the expansion potential of alkali-silica reaction

    • K. Yamada
    • Y. Kawabata
    • J. H. Ideker

    RILEM TC 258-AAA: Recommendations for Avoiding Alkali Aggregate Reactions in Concrete – Performance Based Concept 21 October 2021 Article: 201

    

45. Enhancement of fabric–mortar interfacial adhesion by particle decoration: insights from pull-off measurements

    • Matan Birenboim
    • Amr Alatawna
    • Oren Regev

    Original Article Open access 20 October 2021 Article: 200