Porous Structure of Powders Prepared with Heat Treatment of Gels from Tin (IV) and Antimony (III) Hydroxides Tatyana F. LobunetsAlla A. Rogozinskaya OriginalPaper Pages: 1 - 7
Dynamics of Mechanical Actions on Materials. Part 12. Static Loading of a System with Two Irreversibly Deformable Bodies Mikhail S. Koval'chenko OriginalPaper Pages: 8 - 11
Evaluation of the Porosity of Bars Extruded from an Uncompacted Metal Billet Mikhail V. Sokolov OriginalPaper Pages: 12 - 18
Borided Hot-Worked Powder Materials Based on Iron. Part 1. Kinetics of Diffusion Boriding for Powder Materials Vladimir Yu. Dorofeev OriginalPaper Pages: 19 - 24
Synthesis and Sintering of Nanocrystalline Barium Titanate Powder under Non-Isothermal Conditions. Part 6. Structure, Grain Boundaries, and Dielectric Properties of Barium Titanate Obtained by Various Sintering Methods Andrey V. RagulyaValerii V. Skorokhod OriginalPaper Pages: 25 - 33
Powder Metallurgy Wear-Resistant Materials Based on Iron. Part 1. Materials Prepared by Sintering and Infiltration Genadii A. BaglyukLeonid A. Posnyak OriginalPaper Pages: 34 - 39
Sintered Antifriction Materials for Use at Elevated Temperatures Yurii F. Shevchuk OriginalPaper Pages: 40 - 43
Formation of a Corrosion-Resistant Layer on Steel by Reaction with a Si3N 4 ― Al2O3 Composite under the Conditions of Light-Thermal Treatment Irina A. PodchernyaevaVladimir A. Lavrenko OriginalPaper Pages: 44 - 48
Some Characteristic Features of Formation of Ceramics Based on Composite Powders SiC ― Si3N4 ― Si2N2O Nadezhda K. DavidchukNikolai F. GadzyraGeorgii G. Gnesin OriginalPaper Pages: 49 - 53
Heat Capacity of Gadolinium Germanides at Low Temperatures Alexander S. Bolgar OriginalPaper Pages: 54 - 57
Reaction of Titanium with Boron Nitride under Self-Propagating High-Temperature Synthesis Conditions Stanislav P. Gordienko OriginalPaper Pages: 58 - 60
Interactions in Molten Aluminum (Silicon) ― Boron Alloys Valentina S. Sudavtsova OriginalPaper Pages: 61 - 64
Wetting of Hot-Pressed Aluminum Borides and Borocarbides by Molten Aluminum and Copper Alexei I. Kharlamov OriginalPaper Pages: 65 - 70
Structural Features and Properties of Alloy 84% WC ― 16% Co, Obtained by Hot Pressing in the Solid and Liquid Phases. Part 2. Influence of the Temperature at which the Specimens are Made on Their Physicomechanical Properties Anatolii V. Laptev OriginalPaper Pages: 77 - 83
Structuring of Multiphase Compacts in the SiC ― Carbon System. Part 1. Structuring in Green Blanks Yurii P. Dyban' OriginalPaper Pages: 84 - 89
Reducing the Danger of Explosions in the Production of Powders of Iron and Its Alloys by Methods that Involve Mechanical Comminution Oleg D. Neikov OriginalPaper Pages: 90 - 95