1. The metrological service and quality of production

   OriginalPaper Pages: 1625 - 1627

2. Frequency measurement for an HCN laser

   • V. A. Bondarev
   • R. A. Valitov
   • N. S. Fertik

   OriginalPaper Pages: 1628 - 1631

3. Multichannel measuring system with differential parametric primary converters

   • A. A. Boltyanskii
   • B. K. Raikov
   • N. M. Starobinskii

   General Problems of Metrology and Measurement Techniques Pages: 1632 - 1635

4. Photoelectric apparatus for measuring absolute Kerr constants

   • L. V. Nalbandov

   General Problems of Metrology and Measurement Techniques Pages: 1636 - 1638

5. Increasing the accuracy of pulse-time photoelectric system

   • V. K. Afanas'ev
   • A. M. Gorban

   General Problems of Metrology and Measurement Techniques Pages: 1639 - 1643

6. Measurement errors due to a transducer with unstable parameters

   • Yu. L. Rozov
   • A. E. Sinel'nikov

   General Problems of Metrology and Measurement Techniques Pages: 1644 - 1646

7. Dependence of the accuracy of a measuring instrument on its operating time

   • G. V. Savchenko

   General Problems of Metrology and Measurement Techniques Pages: 1647 - 1650

8. Definition of measurement information and its relationship to initial uncertainty

   • V. Ya. Pleshkov
   • A. P. Shershunov
   • A. I. Yurov

   General Problems of Metrology and Measurement Techniques Pages: 1651 - 1652

9. Method of detecting sources of accuracy failures of automatic sorting machines

   • V. L. Gabinov

   Linear and Angular Measurements Pages: 1653 - 1658

10. Automatic check of the divisions of line-graduated gauges up to 1 m long

    • P. P. Alekseev
    • L. K. Kayak
    • O. V. Yachmentsev

    Linear and Angular Measurements Pages: 1659 - 1662

11. Piezoelectric resonant gauging tip for precision measurements

    • V. A. Egorov
    • V. P. Agarkov
    • V. N. Opalev

    Linear and Angular Measurements Pages: 1663 - 1666

12. Determination of the displacement of the original contour of cylindrical gears using tangential tooth gages

    • V. I. Shepelev

    Linear and Angular Measurements Pages: 1667 - 1671

13. Method of determining phase-frequency characteristics of system M contact profilometers

    • V. Ya. Barash
    • Yu. P. Uspenskii
    • V. M. Grigoroshenko

    Linear and Angular Measurements Pages: 1672 - 1674

14. Measuring the thickness of steel sheets by the eddy-current method

    • V. V. Klyuev

    Linear and Angular Measurements Pages: 1675 - 1678

15. Method of calculating high speed photorecorders with mirror image scanning

    • A. I. Churbakov

    Opticophysical Measurements Pages: 1679 - 1683

16. Weighing errors due to friction in the joints of beam balances

    • N. Ya. Grossman
    • T. B. Dashevskii
    • I. A. Al'tman

    Mass Measurements Pages: 1684 - 1688

17. Application of electromechanical modulating transducers to the calibration of alternating pressure gauges

    • I. N. Dolitskii

    Mechanical Measurements Pages: 1689 - 1692

18. Measurement of water velocity in pipings

    • B. I. Fedorov
    • V. S. Koren'kov
    • É. I. Kul'kov

    Mechanical Measurements Pages: 1693 - 1695

19. Automatic measurement of the basic strength characteristics of metals during standard tensile tests

    • V. A. Sel'skii

    Mechanical Measurements Pages: 1696 - 1699

20. New capillary express viscosimeters

    • B. M. Gershkovich

    Mechanical Measurements Pages: 1700 - 1703

21. Account of viscosity in measuring liquid density by the hydrostatic method

    • L. P. Stepanov

    Mechanical Measurements Pages: 1704 - 1708

22. Absorption filters for expanding the brightness-temperature scale in the infrared region

    • É. A. Lapina

    Mechanical Measurements Pages: 1709 - 1712

23. Multi-input analog comparators

    • I. S. Eremeev

    Mechanical Measurements Pages: 1713 - 1716

24. Changing the scales of electric meters and instruments with light indicators

    • A. A. Kravchenko

    Mechanical Measurements Pages: 1717 - 1722

25. Increasing the stability of the characteristics of instrumentation amplifiers having parallel negative feedback

    • V. S. Popov
    • Yu. S. Yampol'skii

    Mechanical Measurements Pages: 1723 - 1726

26. Feasibility conditions for stabilizing the measured difference between two quantities

    • A. N. Semenov

    Mechanical Measurements Pages: 1727 - 1731

27. Digital-reading instrument for measuring single and rarely repeating pulses of microwave power

    • V. A. Otkidach
    • I. A. Rozhkov
    • B. E. Red'kin

    Mechanical Measurements Pages: 1732 - 1735

28. Digital current dividers with constant input resistance

    • N. Ya. Samoilov

    Mechanical Measurements Pages: 1736 - 1739

29. Noise analysis of current amplifiers with a dynamic capacitor

    • Yu. N. Rodionov

    Mechanical Measurements Pages: 1740 - 1742

30. Apparatus for measuring the photoconductivity of organic semiconductors

    • M. V. Kurik
    • Yu. P. Piryatinskii
    • V. V. Sergienko

    Mechanical Measurements Pages: 1743 - 1745

31. Measuring the intensity of a noise signal under conditions of pulse interference

    • A. A. Gorbachev
    • V. I. Danilov

    Mechanical Measurements Pages: 1746 - 1748

32. Binary divider ladder circuits with inductively coupled branches

    • N. G. Lobzhanidze
    • L. N. Tavdgiridze

    Mechanical Measurements Pages: 1749 - 1754

33. Standard photoneutron source at the All-Union Scientific-Research Institute of Metrology

    • V. I. Fominykh
    • I. A. Yaritsyna

    Radiation Measurements Pages: 1755 - 1759

34. Expert method of instrument quality evaluation

    • É. P. Raikhman

    Quality Control Pages: 1760 - 1763

35. Theory and analysis of instrumentation systems reliability

    • A. V. Matveev

    Quality Control Pages: 1764 - 1768

36. Republican conference of metrologists

    • N. A. Averin

    Metrological Service Pages: 1769 - 1770

37. Organization of special laboratories for state surveillance

    • B. N. Vorontsov

    Metrological Service Pages: 1771 - 1773

38. Preliminary estimate of the manufacture of the required amount of special (nonstandard) measuring instruments

    • L. L. Ionushka

    Metrological Service Pages: 1774 - 1776

39. General-purpose attachment for checking indicators

    • P. I. Mekhonoshin

    Assistance to Measurement Laboratory Workers Pages: 1777 - 1777

40. Complete and element-by-element method for checking ordinary twin bridges of accuracy class 0.05

    • I. M. Viktorova

    Assistance to Measurement Laboratory Workers Pages: 1778 - 1779

41. Fourth session of the Soviet-British Working Group for Scientific-Technical Cooperation in the Field of Standardization and Metrology

    • S. S. Babaev

    International Cooperation Pages: 1780 - 1782

42. In the committee for standards, measures, and measuring instruments of the council of ministers of the USSR

    Information Pages: 1783 - 1783

43. All-Union seminar on “Calorimetry of Ionizing Radiations”

    • A. V. Rultaev

    Information Pages: 1784 - 1785

44. Exhibit of general-purpose measuring instruments of the English firm “Instron”

    • L. M. M.

    Information Pages: 1786 - 1787

45. Apparatus for automatically testing the profile of rolling rolls

    • N. N. Rybikov
    • A. V. Fedotov

    Brief Communications and Letters to the Editor Pages: 1788 - 1790

46. Measurements of angles between planes by means of an autocollimating method using a monitoring-searching mirror

    • Yu. A. Moiseev
    • A. V. Mukhin
    • A. E. Zaitsev

    Brief Communications and Letters to the Editor Pages: 1791 - 1793

47. Method for measuring the physical contact area during welding in the solid phase

    • V. N. Timofeev
    • V. D. Ivanov
    • Yu. M. Kashurnikov

    Brief Communications and Letters to the Editor Pages: 1794 - 1796

48. Tensiometric weighing device having nonzero readout

    • I. Ya. Berezin
    • V. A. Kozyukov

    Brief Communications and Letters to the Editor Pages: 1797 - 1798

49. Versatile table-top test stand for pressure-testing equipment components and sensing elements

    • Yu. I. Sovetov
    • B. Sh. Sheftel'

    Brief Communications and Letters to the Editor Pages: 1799 - 1800

50. Inductance measurements up to 500 mH with the E12-1 (IIEV-1)

    • V. D. Merkulov

    Brief Communications and Letters to the Editor Pages: 1801 - 1801