Abstract
Background
Retrotransposons make a significant contribution to the size, organization and genetic diversity of their host genomes. To characterize retrotransposon families in the grapevine genome (the fourth crop plant genome sequenced) we have combined two approaches: a PCR-based method for the isolation of RnaseH-LTR sequences with a computer-based sequence similarity search in the whole-genome sequence of PN40024.
Results
Supported by a phylogenic analysis, ten novel Ty1/copia families were distinguished in this study. To select a canonical reference element sequence from amongst the various insertions in the genome belonging to each retroelement family, the following screening criteria were adopted to identify the element sequence with: (1) perfect 5 bp-duplication of target sites, (2) the highest level of identity between 5' and 3'-LTR within a single insertion sequence, and (3) longest, un-interrupted coding capacity within the gag-pol ORF. One to eight copies encoding a single putatively functional gag-pol polyprotein were found for three families, indicating that these families could be still autonomous and active. For the others, no autonomous copies were identified. However, a subset of copies within the presumably non-autonomous families had perfect identity between their 5' and 3' LTRs, indicating a recent insertion event. A phylogenic study based on the sequence alignment of the region located between reverse transcriptase domains I and VII distinguished these 10 families from other plant retrotransposons. Including the previously characterized Ty1/copia-like grapevine retrotransposons Tvv1 and Vine 1 and the Ty3/gypsy-like Gret1 in this assessment, a total of 1709 copies were identified for the 13 retrotransposon families, representing 1.24% of the sequenced genome. The copy number per family ranged from 91–212 copies. We performed insertion site profiling for 8 out of the 13 retrotransposon families and confirmed multiple insertions of these elements across the Vitis genus. Insertional polymorphism analysis and dating of full-length copies based on their LTR divergence demonstrated that each family has a particular amplification history, with 71% of the identified copies being inserted within the last 2 million years.
Conclusion
The strategy we used efficiently delivered new Ty1/copia-like retrotransposon sequences, increasing the total number of characterized grapevine retrotrotransposons from 3 to 13. We provide insights into the representation and dynamics of the 13 families in the genome. Our data demonstrated that each family has a particular amplification pattern, with 7 families having copies recently inserted within the last 0.2 million year. Among those 7 families with recent insertions, three retain the capacity for activity in the grape genome today.
Similar content being viewed by others
Background
Sequencing of whole genomes reveals the predominant amount of transposable element DNA they contain, as well as how transposable elements have shaped the genome. Four plant genomes are now fully sequenced: Arabidopsis [1], rice [2], black cottonwood [3] and more recently two grapevine cultivars [4, 5]. Annotation revealed that the amount of repetitive DNA depended on the species, with repetitive DNA composing ~10% of the Arabidopsis genome (125 Mbp), ~35% of rice genome (389 Mbp), and ~41.4% of the grapevine genome (487 Mbp). Analysis of repeated DNA sequences carried out in these genomes, as well as in larger cereal genomes not yet fully sequenced, has shown that insertion of long terminal repeat (LTR) retrotransposons of the two main superfamilies, Ty3/gypsy-like and Ty1/copia-like are the major components of intergenic regions.
Retrotransposons are mobile elements that are closely related to retroviruses in their structure and life cycle [6]. Active retrotransposons begin the process of transposition when RNA is transcribed from the original retrotransposon insertion in the genome. The intermediate RNA transcript is reverse-transcribed into DNA by a retrotransposon-encoded reverse transcriptase enzyme, and the DNA is inserted by additional retrotransposon-encoded enzymes into the host genome at a new location, thus increasing the copy number of the retrotransposon family [7]. The generation and reverse-transcription of the RNA intermediate is what distinguishes retrotransposons from DNA transposons such as the Ac/Ds elements in maize, which are excised by transposon-encoded enzymes from their original insertion site and moved directly to a new insertion site without an RNA intermediate [8, 9]. The copy-and-paste cycle of retrotransposition in the host genome requires the synthesis of specific proteins encoded by two major retrotransposon genes, gag and pol. The Ty1/copia [10, 11] and the Ty3/gypsy [12] superfamilies differ from each other in the order of domains within the pol gene, as well as in their degree of sequence conservation. Specifically in Ty1/copia elements, the pol gene encodes the protease, integrase, reverse transcriptase (RT), and RnaseH domains in that order from the 5' end of the gene. The enzymatic functions encoded in each of these domains are required to synthesize an extrachromosomal DNA daughter copy by reverse-transcription from the intermediate RNA prior to its reinsertion into the genome. As the process of reverse transcription is highly error-prone due to the lack of proofreading, the daughter copies can differ from the master copy [13]. Moreover, individual copies can also diverge independently by mutation following their insertion into the genome. Therefore, one hallmark of retroelements is the genetic heterogeneity of individual copies belonging to the same family [14].
Despite the heterogeneity within retrotransposon families, effective grouping of elements into phylogenetically-supported clusters of related insertions followed by assessment of the level and timing of divergence within those clusters is necessary for informative analysis. The RT domain has the slowest relative rate of change among all retroelement proteins, while the gag domain has a rate of change more than twice as high [15]. Because of the extent of sequence conservation within the reverse transcriptase protein, the use of sequence comparisons of reverse transcriptase domains I and VII has been proposed to group retrotransposons into a family when the amino acid identity with other members is ≥90% and into a superfamily when their identity is ≥75% [16]. While these are effective criteria for grouping individual insertions into meaningful clusters, better methods exist for determining the age of an individual insertion in the genome. Because of the mechanism of transposition, the two LTRs at each end of a retrotransposon are theoretically identical at the time of their insertion [17–19]. After insertion, the 5' and 3' LTRs begin to evolve independently and diverge from each other in sequence. Thus, the sequence divergence between the 5' and 3' LTRs of an individual element can be used to estimate the time since insertion at a specific locus [20].
Various strategies have been employed to identify retrotransposon sequences in genomes. Prior to the determination of the complete genomic sequence of the organism, full-length or parts of Ty1/copia-like retrotransposon were identified by virtue of their presence within coding sequence being characterized, such as Tnt1 in the tobacco nitrate reductase gene [21] or Vine-1 in a grape Adh r gene [22]. Others insertions have been identified through their contribution to an important phenotypic character such as the color of grape skins associated with the presence of the Gret1 retrotransposon in the promoter region of VvMybA1 [23]. Following the completion of genomic sequencing of Arabidopsis, retroelement sequences have also emerged from computer-based sequence similarity searches in genomic databases [24]. Few techniques exist to identify explicitly retrotransposon sequences in genomes prior to the characterization of the complete genome sequence for an organism. To address this need, Pearce et al. developed a PCR-based method to identify experimentally Ty1/copia-like retrotransposon LTR sequences of any higher plant, and verified its utility by isolating novel LTR sequences from pea, broad bean and Norway spruce [25]. Following this procedure, Riccioni et al. have isolated Tmt1, the first LTR-retrotransposon from ectomycorrhizal fungi of the genus Tuber that shows relatedness to Ty3/gypsy retrotransposons [26].
Because retrotransposons make a significant contribution to the size, organization and genetic diversity of genomes, characterization of grapevine retrotransposons is important. Three retrotransposons were described prior to the grape whole-genome sequencing: a unique copy of Vine-1, a Ty1/copia-like element [22] and of Gret1, a Ty3/gypsy-like element [23] and the Tvv 1 family [27, 28]. The grape genome sequence has recently been obtained from two sources: a highly homozygous grape line PN40024 [4] and the Pinot noir cultivar [5]. These genomic resources make possible the characterization in silico of grape retrotransposons. Annotation of grapevine transposable elements in the sequence derived from both sources revealed a large prevalence of retrotransposons over transposons. In the PN40024 sequence, the most abundant transposable elements corresponded to Ty1/copia-like retrotransposons, with an uneven distribution over the grape chromosomes, and mainly restricted to low gene density regions and introns [4]. In contrast, within the Pinot noir genomic sequence the most prevalent retrotransposons corresponded to gypsy/athila-like elements [5]. In this study, we extend the utility of the Pearce technique into organisms with characterized, complete genomes. We first discovered novel Ty1/copia-like families in the grapevine genome through analysis of RnaseH-LTR sequences isolated by the Pearce technique from genomic DNA derived from Pinot noir plant material. We then used the isolated sequences as a highly diverse query set to perform a computer-based sequence similarity search against the completed grape genome sequence dataset. Supported by phylogenic analysis, we distinguished novel families and identified a canonic representative element for each family. Their phylogenic relationship with other reference plant retrotransposons was studied. Based on LTR divergence, insertion dating of full-length copies belonging to 13 grapevine retrotransposon families was estimated in order to study the dynamics of these families. Finally, the sequence-specific amplification polymorphism (S-SAP) profiles [29] of 8 retrotransposon families were evaluated in 10 Vitis accessions.
Results
Characterization of ten new Ty1/copia-like retrotransposon families of the grapevine genome
Our application of the technique of Pearce et al. [25] to the grapevine genome resulted in the isolation of 27 putative retrotransposon sequences. Among these putative retrotransposon sequences, 24 contained an identifiable portion of the 3'-end of Ty1/copia- like retrotransposons including a putative RnaseH domain, the polypurine tract (PPT), and varying amounts of the 3'LTR sequence. Eighteen of them were unique and six almost identical (subsequently characterized as Edel sequences). None of the fragments we identified were similar enough to one of the three grapevine retrotransposon families previously characterized to be considered additional insertions within those previously characterized families.
A data mining procedure from the grape genomic sequence using the BLAST algorithm with the 18 unique and 3 of the nearly identical sequences as queries yielded 21 different full-length retrotransposons harboring an internal domain flanked by LTRs, twelve of them displaying perfect target duplication sites. Thus, the 3'-end sequences of the retrotranpsosons identified by the Pearce technique could be used to 'tag' a diverse set of full- or nearly full-length retrotransposons within the completed grape genome. A phylogenic analysis was conducted based on the alignment of the amino acid sequence located between reverse transcriptase domains I and VII deduced from the upstream nucleic sequence of the 21 elements. Tvv1-VB [28], one of the two Ty1/copia- like retrotransposons previously characterized in the grapevine genome were added to improve the comprehensiveness of this analysis. The other, Vine 1, could not be included in this analysis, as it lacks the RT-domain sequence that forms the basis for this comparison. The Neighbor-Joining tree clustered the 21 elements into 10 distinct families, which were also distinct from Tvv1-VB (Figure 1). The largest family, Gentil, included eight elements, the Edel family three elements and two families, Huben and Rangen, each included two elements. Finally, six families, Brand, Cremant, Gans, Kastel, Noble and Wintz were represented by a single element. The domain order inside the pol gene of the amino acid sequence suggested that all the novel families identified by the Pearce technique were Ty1/copia-like elements. The clustering data were confirmed by evaluating the identity level of the partial RT domains as suggested by Bowen and McDonald [16]. This level was ≥79% within elements classified in the same family, and ranged from 35–67% for elements classified into distinct Ty1/copia families. The identity level of the partial domains ranged from 12–21% for comparisons between Gret1, a Ty3/gypsy element, and the various Ty1/copia families.
Classification of the 21 novel full-length retrotransposon sequences into 10 families. The Neighbor-Joining tree is based on the multiple sequence alignment of amino acid sequences between reverse transcriptase domains I and VII using the Poisson distance model. * Insertions displaying perfect target duplication sites. Ty1/copia retrotransposons Tvv1 from grapevine and Hopscotch from maize (acc. n° U12626) were added as references. Bootstrap values greater than 60% are shown on the tree.
Representation of the 13 families in the grapevine genome
The BLAT program was used to extract the paralogous copies of the ten families from the grapevine genome along with Tvv1-VB, Vine-1 and Gret1. A total of 1709 sequence matches were identified, with the copy number per family ranging from 91 to 212. The families with the highest copy numbers were Gentil (212), Edel (187), Noble (185), and Gret1 (173) while Huben and Kastel (91) had the lowest copy number (Additional file 1). For all families except Gret1, copies longer than the reference size were found. In particular, one Edel element contains a long insertion that extends its size to over 382% of the reference copy. Generally, all families had a median length below that of the reference query, indicating that most of the copies were truncated, but with a high sequence identity to the reference sequence (median range 0.80–0.97). Using Vine-1 as the query, most of the additional insertions also correspond to truncated copies. One larger copy was 107.6% of the reference Vine-1 copy length, but the additional sequence in this insertion does not code for the RT-RnaseH domain that is lacking in the reference Vine-1 element [22].
Considering that all retrieved copies likely were equal in length to their corresponding reference sequences at the time of their insertion, they would represent a total theoretical DNA quantity of 8.9 Mb added to the genome by their specific amplification. The Gret1 family, because of a reference copy size of 10,422 bp, and Noble, due to a combination of large reference copy size and high genomic copy number among the Ty1/copia families in the grape genome, would likely have contributed the greatest to the retroelement DNA content. Summing all actual retroelement insertion lengths, a residual amount of 4.8 Mb of retrotransposon DNA (representing 1.24% of the PN40024 genome) remains in the genome, suggesting that 47% of retrotransposon inserted sequence has been removed between the time of insertion and the present day. Copies classified into the 13 families are scattered around all chromosomes as currently assembled with an overall density of 4.43 copies per Mb (Table 1). However, this distribution is not uniform. With 54 copies, chromosome 8 (21.56 Mb) has the lowest retrotransposon insertion density (2.50 insertion per Mb) while chromosome 16 (8.159 Mb) has a density almost a third higher (7.23 insertion per Mb). Most retrotransposon families seem to be rather uniformly distributed on all chromosomes except Gans, which is absent from 6 chromosomes but present in 17 copies on chromosome 5.
Identification of the canonical copies
For each family, a canonical copy was identified among elements whose length was at least 80% of the full-length insertions identified by BLAT with an identity level higher than 75%. The following additional criteria helped to identify the canonical copy: (1) perfect 5 bp-duplication of target sites, (2) the highest level of identity between 5' and 3' LTR within a single insertion sequence, and (3) longest, un-interrupted coding capacity within the gag-pol ORF. These criteria are likely to identify the most recently inserted and potentially active member of the family. The criteria differ significantly from the consensus approach that identifies ancestral, presumably active sequences within retroelement families [30]. The 10 canonical elements selected varied in size from 4,086 to 5,519 bp, with LTRs ranging from 147 to 502 bp (Additional file 2). For eight of the families, LTRs begin and end with the dinucleotide inverted repeat TG...CA as observed for many LTR-retrotransposons and retroviruses [31]. More precisely, seven start with the four-nucleotide stretch TGTT, and among them two, Brand and Rangen, end with the corresponding inverted stretch AACA. Huben and Wintz LTRs begin with the four-nucleotide stretch TGTG and end with TTCA and GTCA, respectively. Finally, Cremant LTRs begin with the four-nucleotide stretch TAAC and end with GTCA.
One Cremant, 3 Edel and 8 Noble elements showed a single putative ORF uninterrupted by a stop-codon before the PPT, corresponding to polyproteins that were 1,346, 1,298 and 1,486 amino acids long respectively, indicating that they could be autonomous. By comparison with Ty1/copia- like plant retrotransposons previously characterized, the general organization of the putative ORFs of Cremant, Edel and Noble elements is very similar both in structure and in length, compared to the 1,296, 1,382, 1,328 and 1,447 amino acid-long ORF of the barley BARE-1 (acc. n° Z17327), grapevine Tvv1-VB (acc. n° EU304807), tobacco Tnt1 (acc. n° X13777), and Arabidopsis thaliana AtRE1 (acc. n° AB021265) retrotransposons, respectively. The putative ORFs of the seven remaining elements were prematurely interrupted by a stop codon or a frameshift in the coding regions. Although Gans, Gentil, Huben and Wintz canonic copies lack a putative full-length polyprotein, the homology between LTRs (100%, 99.7%, 100% and 99.3%, respectively) indicates that they moved recently into their current insertion site (Additional file 2). The 8 Noble copies that are putatively active displayed an ORF 4,458 bp-long but differed by their untranslated leader (UTL) region located between the 5'LTR and the ORF, which ranged in size from 578 to 632 bp-long. Moreover, considering the 40 full-length Noble copies identified by perfect host 5 bp-target sites, their UTL region varied from 269 bp to 695 bp (average 610 bp), and all started with the sequence TGGTATCAGAGCC which corresponds to the PBS. A detailed analysis of the UTL sequence within 12 Noble elements indicated that variations in size of this region have essentially resulted from large single deletions/insertions.
To elucidate the phylogenic relationships among the ten novel families, Tvv1, Gret1, and 13 other plant Ty1/copia-like retrotransposons, the amino acid sequences between motifs I to VII of the RT were aligned [32]. In some cases, grape retrotransposon families clustered more closely with previously identified retrotransposon families in other species than with other retrotransposon families in grape (Figure 2).
Phylogenetic analysis of the 10 novel families. The Neighbor-Joining tree is based on the multiple sequence alignment of amino acid sequences between reverse transcriptase domains I and VII using the Poisson distance model. For novel families, amino acid sequences were deduced from canonic copies and for other plant retrotransposons from published nucleotide sequences:A. thaliana AtRE1; A. thaliana Ta-1 (acc. n° X13291); Cajanus cajan Panzee (acc. n° AJ000893); Hordeum vulgare BARE-1; Ipomoea batatas Rtsp-1 (acc. n° AB162659); Nicotiana tabacum Tnt1; N. tabacum Tto1 (acc. n° D83003); Oryza sativa RIRE-1 (acc. n° D85597); Pisum sativum PDR1 (acc. n° X66399); Solanum chilense TLC1 (acc. n° AF279585); V. vinifera Tvv1-VB; V. vinifera Gret1 (acc. n° AB111100);Zea mays PREM-2 (acc. n° U41000); Z. mays Opie-2 (acc. n° AF090446). Grapevine retrotransposon families are given in bold. Bootstrap values greater than 60% are shown on the tree.
Genomic paleontology
The insertion dates for 163 retrotransposon copies considered to be full-length and belonging to the 13 families of this study (the 10 newly identified along with Gret1, Vine-1, and Tvv1) were estimated by aligning the 5' and 3' LTR sequence according to Vitte et al. [33]. This analysis (Figure 3) revealed that copy age ranged from ≤0.2–11 million years (My). One hundred and fifteen copies (70%) were inserted within the last 2 My. Forty-five copies belonging to 7 families (28% of the total number of full-length copies) had identical 5' and 3'-LTRs, indicating recent movement at the limit of detection (0% divergence theoretically corresponding to an insertion within the last 0.2 My) for this analysis. Two types of insertion age patterns within retroelement families were obtained, reflecting distinct evolutionary histories and activities of particular families. Some families had a continuous distribution of insertion dates such as Edel (1–5 Mya) or Gentil (1–7 Mya). In contrast, other families show discrete groups of copies inserted at the same date such as Tvv1 (recent, 3 and 7 Mya) or Noble (recent and 0.5 Mya) possibly reflecting different bursts of amplification.
Distribution of the insertion dates for full-length copies belonging to the 13 grapevine LTR retrotransposon families. LTR divergence was used to estimate date of insertion of full-length copies that were also flanked by perfect direct repeats. The copy number of full-length elements for each family is given in parenthesis.
Insertion pattern of 8 retrotransposon families within the genus Vitis
To visualize the distribution of copies belonging to 8 of the retrotransposon families across the Vitis genus, a set of 10 Vitis accessions including a subset of 7 accessions of the V. vinifera species was chosen. For each retrotransposon family, S-SAP insertion patterns differed both by the number of scored bands and by the polymorphism level for all accessions (Figure 4). In the Vitis set, the 8 patterns yielded a total of 31 to 70 scored bands ranging in size from 125–573 bp, depending on the family (Table 2). This number decreased to 19–50 scored bands within the V. vinifera subset. In both sets, the lowest number of scored S-SAP bands was obtained for Edel and the highest for Huben. The percentage of polymorphic bands ranged from 85.7–100% within the Vitis set and from 54.5–94.7% within V. vinifera subset. The highest number of bands shared by accessions in both sets corresponded to Gans insertions while only one Edel insertion was common to the 7 V. vinifera accessions.
Comparison of S-SAP insertion patterns of 4 retrotransposons on 10 Vitis accessions. Accessions are numbered as followed: 1: PN40024, 2: pinot noir, 3: cabernet sauvignon, 4: grenache, 5: muscat d'Alexandrie, 6: syrah, 7: Vitis silvestris, 8: Vitis amurensis, 9: Vitis riparia, 10: Muscadinia rotundifolia.
Discussion
Identification of the novel retrotransposon families
Combining an RnaseH-LTR analysis of sequences isolated using the technique described by Pearce et al. [25] with a computer-based sequence similarity search in the whole-genome grapevine sequence, we have identified ten novel Ty1/copia-like retrotransposon families. None of the sequences identified in this study belong to a grapevine retrotransposon family previously described. This result demonstrates effective complementation of bench laboratory and in silico techniques, enhancing the benefits of either used alone. If standard laboratory cloning techniques (e.g. genome 'walking') were used to obtain complete retrotransposon sequence from the 3'-end sequences isolated by the Pearce technique, considerable time and expense would have been devoted to the subsequent procedures and necessary reagents. Full-length elements were effectively cloned in silico using the sequences identified by the Pearce technique as a query for genomic searches. However, if a purely in silico approach had been employed to isolate new retrotransposon sequence from grape using only previously known retrotransposon sequences from other species as a query, the more divergent elements in grape would have been overlooked. Thus, our work expands the utility of the Pearce technique from plants with little to no available genomic sequence data available through those plants with fully characterized genomes.
Among the 24 sequences containing an identifiable portion of the 3'-end of retrotransposons, 18 were unique and six almost identical (corresponding to the Edel element family). Full-length retrotransposon nucleotide sequence was then identified from the grape genome by querying in BLAST with the 3'-end of the retrotransposon identified by the Pearce technique along with pre-determined total length criteria (see Materials and Methods). Clustering of the 21 different full-length retrotransposons identified by BLAST into distinct families was based on the alignment of their corresponding amino acid sequences between reverse transcriptase motifs I to VII [16]. Ten families were identified, with insertion numbers ranging from an single to 8 element insertions. The observed level of identity when comparing amino acid sequences was greater than 79% between elements clustered in the same family, while it decreased from 35–67% between elements classified within differing Ty1/copia families, and further drops from 12–21% between any member of the Ty1/copia families and Gret1, a unique grapevine gypsy element. However, within the corresponding amino acid region, the identity values we obtained are lower than those proposed by Bowen and McDonald [16] for grouping a particular element into a family (>90% identity) and into a superfamily (>75% identity). In our study, amino acid identity values alone did not suggest a clear-cut discrimination point sufficient to classify unknown elements, and a neighbor-joining phylogenetic analysis was more informative.
The ten families we identified were all related to Ty1/copia superfamily, as expected from a technique employing primers designed to target Ty1/copia RnaseH motifs. However, using the same procedure, Tmt1, a Tuber LTR-retrotransposon was isolated. Its relatedness to Ty3/gypsy, retrotransposon superfamily was further established [26] showing that the Pearce method is also suitable to isolate gypsy elements. The classification into families of the PCR-amplified fragments revealed an over-representation the two families Gentil and Edel which were further shown to have the highest copy numbers in the grape genome, whereas six families have been identified from a unique fragment among them Noble that showed as many copies as Edel. Finally seven families start with the four-nucleotide stretch TGTT. Thus, the Pearce technique may have additional biases for sequence isolation within the Ty1/copia group.
Genomic fraction of the genome occupied by 13 grapevine retrotransposon families
The BLAT program was used to extract from the PN40024 genome a total of 1709 copies paralogous to the 13 canonical copies representing the families identified in this study at the most stringent criteria for seeding alignments based on sequences of 95% and greater similarity over 40 bases of length or more. BLAT also detected a small number of perfect sequence matches as short as 16 bases that we have taken in consideration. Because of the stringent identification parameters we used, the copy number of these families could be underestimated. Only copies flanked by perfect 5 bp-duplication target sites that result from repair of the integration event were considered, in order to eliminate chimerical copies that could have resulted from errors introduced during genome assemblage. No apparent conservation between 5 bp-direct repeats flanking the 10 canonical elements were observed, only predominance for A-rich sites.
Excluding Gret1, a total of 1,536 Ty1/copia-like copies belonging to the 12 families cover 1.03% of the PN40024 genome. This number can be compared to the 17,293 occurrences (5.16%) identified in the PN40024 genome by BlastX annotation or to the 56,890 occurrences (8.35%) identified by manual annotation of Ty1/copia superfamily [4]. The 1,536 occurrences constitute a total DNA amount of 3,771.48 Kb, which corresponds to 8.88% of 24,640.8 Kb occupied by the 17,293 occurrences and to 2.69% of 39,848.3 Kb occupied by the 56,890 occurrences. Gret1, the only Ty3 gyspy retrotransposon considered in this study covers the largest fraction of the genome, probably due to its length. The 173 identified copies covering 1,028.36 Kb (0.21%) of the PN40024 genome are a part of the 9,632 occurrences of the total fraction of Ty3/gypsy superfamily that cover 17,659.6 Kb and of the 14,093 occurrences covering 15,339.8 Kb identified by both annotations. Thus, the 173 occurrences correspond to 1.79% to 1.22% of the total Ty3/gypsy superfamily depending on the annotation method. Overall, these data indicate that these retrotransposon insertions constitute only a small fraction of the total retrotransposon DNA content of the grape genome.
Genomic distribution of copies belonging to the ten families is not uniform, with chromosome 16 having the highest density and chromosome 8 the lowest. However, this result has to be cautiously considered since a large number of copies belong to scaffolds that remain to be attributed to a particular chromosome. Retrotransposon density seems to be independent of the density of resistance gene analog (RGA) markers since these two chromosomes are very poor in mapped RGA loci [34]. Our results are in general agreement with the uneven distribution of transposable elements over the grape chromosomes, with insertions mainly restricted to low gene density regions [4].
Regulation and functionality of the different retrotransposon families
A main feature of the novel families, except Brand, is their LTR size ranging from 147 to 373 bp, shorter that most of the plant retrotransposons previously characterized such as Ta1, Tnt1, and BARE1 with LTRs of 514, 610 and 1,829 bp, respectively. This common feature of relatively short LTRs could then characterize grapevine Ty1/copia retrotransposons. Seven families begin with TGTT, a four-nucleotide stretch that also starts many LTR-retrotransposons such as Tvv1, Vine-1, Tst1, Tto1, PDR1, Ta1 or copia. However, neither Tvv1 nor Vine1 sequences were captured by this application of the Pearce technique in spite of their short LTRs of 149 and 287 bp, respectively, and starting with the four-nucleotide stretch TGTT.
In the Noble family, copies differ by their UTL region sized from 269–695 bp. A sequence analysis determined that this size variation is essentially caused by large deletions/insertions within the internal UTL region. Noble family elements are similar to Tvv1 elements in the source of their size variation within this region [35].
One to eight copies encoding a single putatively functional gag-pol polyprotein were identified for three families, indicating that these families could be still autonomous and active. For the others, no autonomous copies were identified. Our in silico analysis ultimately showed that no full-length copies of Vine 1, first described truncated in its 3' ORF sequence [22] are present in the grapevine genome (Additional file 1). A subset of presumably non-autonomous retrotransposons had identical 5' and 3'-LTRs indicating that they were recently inserted at that locus. It is possible that PN40024, an accession bred to near homozygosity, has lost the corresponding active copies during the successive cycles of self-fertilization. However, these functional copies could still remain in the heterozygous parent and in other grapevine accessions as well. It is also possible that trans complementation can occur between autonomous and non-autonomous families, resulting in the movement of retrotransposons that do not themselves code for all of the necessary replication enzymatic machinery.
Dating of insertion of the different families
S-SAP insertion patterns of 8 retrotransposon families on 10 Vitis accessions showed that these retrotransposon families are present across the Vitis genus. Only a few insertion sites are fixed in all accessions, which should have been maintained during speciation. Most of the scored bands are polymorphic, indicating that these families have been active after speciation across the genus. Differences in the number of bands shared in both sets can be interpreted in the light of the differences in activity level between retrotransposon families. The lower polymorphism level of Gans could indicate that activity of this family was confined to the distant past, whereas the high polymorphism of Edel could indicate more recent activity. To provide more precise insights into the evolutionary histories and activities of different families, time since insertion of full-length copies belonging to 13 families was estimated. However, the stringent parameters that we used to retrieve full-length copies has probably eliminated the most degenerated, thus the oldest, copies. In our analysis 71% of the full-length retrotransposon copies were inserted within the last 2 My, possibly thanks to a burst of retrotransposition. Finally, in a chronology of the insertions of the different families, the older Kastel copy being ~11 million years old is in agreement with paleo-botanical data that record the first Vitaceae fossils from the Miocene (23.0 to 5.3 My) [36].
Conclusion
Combining a molecular genetic approach with a computer-based study, we have identified ten novel grapevine Ty1/copia-like retrotransposon families, none of them belonging to a retrotransposon family previously described. Our study has increased the number of grapevine retrotrotransposons from 3 to 13. Studying the characteristics of the different families, we show that at least three families could be still autonomous and active with 1–8 copies encoding a single putatively functional gag-pol polyprotein. We have further characterized the representation of each of the 13 grapevine retrotransposon families in the genome, including in our study Tvv1, Vine-1 and Gret1. Vine-1 and Gret1 have both been previously represented by only a single copy characterized in the genome. Altogether, we have retrieved 1,709 copies belonging to the 13 families in this study. They currently represent 1.24% of the sequenced genome, but this corresponds to only half of the amount of retrotransposon DNA present at the time of insertion. Lastly, we show the presence of 8 retrotransposon families across the Vitis genus, with S-SAP insertion polymorphism indicating their activity after speciation. While the amplification history of the 13 families varies both in timing and between families, a majority of copies belonging to 7 families were inserted within the last 2 My. To our knowledge, this study is the first extensive census of LTR-retrotransposons of the grapevine genome.
Methods
Plant material and DNA extraction
3'-end retroelement sequences were isolated from pinot noir S15. S-SAP fingerprinting was performed on a set of 10 Vitis accessions including 1 accession each of Muscadinia rotundifolia, Vitis amurensis and V. riparia, and 7 exemplars of the V. vinifera species, represented by PN40024, 5 accessions of cultivated grapevine varieties and 1 accession of a wild vine. Total genomic DNA extractions were performed using the Qiagen Plant extraction kit (Qiagen, Valencia, CA) according to manufacturer's protocols.
Sequence isolation
Isolation of 3'-end retroelement sequences was performed according to Pearce et al. [25] with modifications. The first amplification was performed using both published primers: an adapter primer targeting the synthetic adapter sequence ligated to the genome fragments produced by restriction digestion paired with a biotinylated retroelement-specific primer targeting RnaseH motif 1. Following bead-based recovery of the biotinylated product, a nested amplification was performed using an adapter primer modified from the published sequence by the addition of a single selective base at the 3'-end of the primer. The modification of the adapter primer reduced the formation of products resulting from adapter to adapter amplification and increased the recovery of retroelement-containing DNA sequences. The modified adapter primer was paired with the published retroelement-specific primer targeting the downstream sequence RnaseH motif 2. PCR products were cleaned up using the QIAquick PCR purification kit (Qiagen, Valencia, CA) before being cloned using the Promega pGEM T-Easy cloning kit (Promega, Madison, WI) with Invitrogen DH5 E. coli cells (Invitrogen, Carlsbad, CA) according to manufacturer's protocols.
Sequence analysis
Computer-assisted analysis of the twenty-seven 3'-end retroelement sequence fragments was performed in DNASTAR SeqManII. Full-length corresponding elements were located in the grapevine genome using Genoscope BLAST server [37] by identifying LTRs separated by 4–5 Kb along with target site duplications that mark retrotransposon insertion. They were then individually examined for position of their LTRs, UTL and ORFs in DNAsis 2.1 (Hitachi Software Engineering Co, Ltd) and Vector NTI 7 (InforMax Inc). Amino acid sequences between reverse transcriptase motifs I to VII were deduced from the nucleic acid sequences. MEGA v3.1 [38] was used to achieve multiple alignment of partial amino acid sequences by Clustal W and to draw Neighbor-Joining tree using the Poisson distance model. Amino acid sequences were compared two by two using the EMBOSS Pairwise Alignment Algorithms [39]. The 10 families were named after wines produced or vineyards cultivated in the Alsace region of France.
Data mining
The BLAT program was used to extract the paralogous copies of the ten families from the PN40024 genome [40]. BLAT on DNA is designed to find sequences displaying stretches of 40 bases or more in length with 95% and greater similar to the query. It also finds perfect shorter sequence matches. All matches that were at least 80% of the length of the full-length insertions identified by BLAT and had a similarity level higher than 75% were considered to identify canonical copies. The nucleotide data of the 10 reported canonical copies have been deposited in Repbase database. Using gag-pol polyprotein sequences available from public databases, we selected amino acid sequences between reverse transcriptase motifs I to VII to build the Neighbor-Joining tree based on the Poisson distance model.
Genomic paleontology
The insertion of full-length copies were dated based on the divergence of the 5' and 3'-LTR sequence of each copy, as proposed by San Miguel et al. [20]. LTR sequences were aligned in MEGA v3.1 and the observed divergence was corrected following the Jukes and Cantor molecular evolution model, as proposed by Vitte et al. [33]. This corrected divergence was then translated to estimate the insertion date of the elements at their present location, using the average base substitution rate derived from the grass adh1-adh2 region of 6.5 × 10-9 substitution per site per year [41], given the assumption of a uniform mutation rate in grapevine.
S-SAP analysis
S-SAP insertion patterns were produced largely following the protocol described by Waugh et al. [29]. LTR forward primers for 8 retrotransposon families were designed from the region of the LTR with the highest level of conservation for each family. Each LTR-specific primer was used together with the same adaptor primer Eco-AG, which had two selective nucleotides. Retrotransposon primers were IRD 800 5' labeled (MWG Biotech AG, Ebersberg, Germany) to resolve PCR fragments by electrophoresis on a 41 cm long 5.5% acrylamide gel (KB Plus 5.5% gel matrix, Li-Cor Biotechnology, Lincoln, NB) in a Li-Cor 4000 L automated DNA sequencer (Lincoln, NB). IRD41-labeled M13 fragments (50–1,206 bp) were used as size standard.
For each accession and each retrotransposon, S-SAP amplifications were performed at least twice and loaded on independent gels to establish consistency. S-SAP bands in each individual lane were detected using the RFLPscan (version 2.1) software (Scanalytics, Fairfax, VA). The distance from the retroelement-specific primer binding site within the LTR to the genomic portion of the fragment ranged from 50 bp to 106 bp. Thus, only reproducible bands greater than 125 bp in length corresponding to insertion sites were scored.
References
Arabidopsis Genome Initiative: Analysis of the genome sequence of the flowering plant Arabidopsis thaliana. Nature. 2000, 408: 796-815. 10.1038/35048692.
Sequencing Project International Rice Genome: The map-based sequence of the rice genome. Nature. 2005, 436: 793-800. 10.1038/nature03895.
Tuskan GA, DiFazio S, Jansson S, Bohlmann J, Grigoriev I, Hellsten U, Putnam N, Ralph S, Rombauts S, Salamov A: The genome of black cottonwood, Populus trichocarpa (Torr. & Gray). Science. 2006, 313: 1596-1604. 10.1126/science.1128691.
The French-Italian Public Consortium for Grapevine Genome Characterization: The grapevine genome sequence suggests ancestral hexaploidization in major angiosperm phyla. Nature. 2007, 449: 463-467. 10.1038/nature06148.
Velasco R, Zharkikh A, Troggio M, Cartwright DA, Cestaro A, Pruss D, Pindo M, FitzGerald LM, Vezzulli S, Reid J: A High Quality Draft Consensus Sequence of the Genome of a Heterozygous Grapevine Variety. PLoS ONE. 2007, 2: e1326-10.1371/journal.pone.0001326.
Boeke J, Corces V: Transcription and reverse transcription of retrotransposons. Annu Rev Microbiol. 1989, 43: 403-434. 10.1146/annurev.mi.43.100189.002155.
Feschotte C, Jiang N, Wessler SR: Plant transposable elements: Where genetics meets genomics. Nature Rev Genet. 2002, 3: 329-341. 10.1038/nrg793.
Wicker T, Sabot F, Hua-Van A, Bennetzen JL, Capy P, Chalhoub B, Flavell A, Leroy P, Morgante M, Panaud O: A unified classification system for eukaryotic transposable elements. Nature Rev Genet. 2007, 8: 973-982. 10.1038/nrg2165.
Finnegan DJ: Eukaryotic transposable elements and genome evolution. Trends in Genetics. 1989, 5: 103-107. 10.1016/0168-9525(89)90039-5.
Voytas DF, Cummings MP, Konieczny A, Ausubel FM, Rodermel SR: Copia-like retrotransposons are ubiquitous among plants. Proceedings of the National Academy of Sciences. 1992, 89: 7124-7128. 10.1073/pnas.89.15.7124.
Flavell AJ, Dunbar E, Anderson R, Pearce SR, Hartley R, Kumar A: Ty1-copia group retrotransposons are ubiquitous and heterogeneous in higher plants. Nucl Acids Res. 1992, 20: 3639-3644. 10.1093/nar/20.14.3639.
Suoniemi A, Tanskanen J, Schulman A: Gypsy-like retrotransposons are widespread in the plant kingdom. Plant J. 1998, 13: 699-705. 10.1046/j.1365-313X.1998.00071.x.
Gabriel A, Willems M, Mules EH, Boeke JD: Replication infidelity during a single cycle of Ty1 retrotransposition. Proc Natl Acad Sci USA. 1996, 93: 7767-7771. 10.1073/pnas.93.15.7767.
Casacuberta JM, Vernhettes S, Grandbastien M-A: Sequence variability within the tobacco retrotransposon Tnt1 population. EMBO J. 1995, 14: 2670-2678.
McClure MA, Johnson MS, Feng DF, Doolittle RF: Sequence comparisons of retroviral proteins: Relative rates of change and general phylogeny. Proceedings of the National Academy of Sciences. 1988, 85: 2469-2473. 10.1073/pnas.85.8.2469.
Bowen NJ, McDonald JF: Genomic analysis of Caenorhabditis elegans reveals ancient families of retroviral-like elements. Genome Res. 1999, 9: 924-935. 10.1101/gr.9.10.924.
Bennetzen JL, SanMiguel P, Chen M, Tikhonov A, Francki M, Avramova Z: Grass genomes. Proceedings of the National Academy of Sciences. 1998, 95: 1975-1978. 10.1073/pnas.95.5.1975.
Jordan IK, McDonald JF: Evidence for the role of recombination in the regulatory evolution of Saccharomyces cerevisiae Ty elements. J Mol Evol. 1998, 47: 14-20. 10.1007/PL00006358.
Jordan IK, McDonald JF: Tempo and mode of Ty element evolution in Saccharomyces cerevisiae. Genetics. 1999, 151: 1341-1351.
San Miguel P, Gaut BS, Tikhonov A, Nakajima Y, Bennetzen JL: The paleontology of intergene retrotransposons of maize. Nature Genet. 1998, 20: 43-45. 10.1038/1695.
Grandbastien M-A, Spielmann A, Caboche M: Tnt1, a mobile retroviral-like transposable element of tobacco isolated by plant cell genetics. Nature. 1989, 337: 376-380. 10.1038/337376a0.
Verriès C, Bès C, This P, Tesnière C: Cloning and characterization of Vine-1, a LTR- retrotransposon-like element in Vitis vinifera L., and other Vitis species. Genome. 2000, 43: 366-376. 10.1139/gen-43-2-366.
Kobayashi S, Goto-Yamamoto N, Hirochika H: Retrotransposon-induced mutations in grape skin color. Science. 2004, 304: 982-10.1126/science.1095011.
Le QH, Wright S, YU Z, Bureau T: Transposon diversity in Arabidopsis thaliana. Proc Natl Acad Sci USA. 2000, 97: 7376-7381. 10.1073/pnas.97.13.7376.
Pearce S, Stuart-Rogers C, Knox M, Kumar A, Ellis N, Flawell A: Rapid isolation of plant Ty1-copia group retrotransposon LTR sequences for molecular marker studies. The Plant Journal. 1999, 19: 711-717. 10.1046/j.1365-313x.1999.00556.x.
Riccioni C, Rubini A, Belfiori B, Passeri V, Paolocci F, Arcioni S: Tmt1 : the first LTR-retrotransposon from a Tuber spp. Current Genetics. 2008, 53: 23-34. 10.1007/s00294-007-0155-9.
Pelsy F, Merdinoglu D: Complete sequence of Tvv1, a family of Ty1 copia-like retrotransposons of Vitis vinifera L., reconstituted by chromosome walking. Theor Appl Genet. 2002, 105: 614-621. 10.1007/s00122-002-0969-2.
Moisy C, Blanc S, Merdinoglu D, Pelsy F: Structural variability of Tvv1 grapevine retrotransposons can be caused by illegitimate recombination. Theor Appl Genet. 2008, 116: 671-682. 10.1007/s00122-007-0700-4.
Waugh R, McLean K, Flavell AJ, Pearce SR, Kumar A, Thomas BBT, Powell W: Genetic distribution of Bare-1-like retrotransposable elements in the barley genome revealed by sequence-specific amplification polymorphisms (S-SAP). Molecular General Genetics. 1997, 253: 687-694. 10.1007/s004380050372.
Ivics Z, Hackett P, Plasterk R, Izsvák Z: Molecular reconstruction of Sleeping Beauty, a Tc1-like transposon from fish, and its transposition in human cells. Cell. 1997, 91: 501-510. 10.1016/S0092-8674(00)80436-5.
Dej K, Gerasimova T, Corces V, Boeke J: A hotspot for the Drosophila gypsy retroelement in the ovo locus. Nucl Acids Res. 1998, 26: 4019-4025. 10.1093/nar/26.17.4019.
Hudak J, McClure MA: A comparative analysis of computational motif-detection methods. Pac Symp Biocomput. 1999, 138-149.
Vitte C, Chaparro C, Quesneville H, Panaud O: Spip and Squiq, two novel rice non-autonomous LTR retro-element families related to RIRE3 and RIRE8. Plant Science. 2007, 172: 8-19. 10.1016/j.plantsci.2006.07.008.
Di Gaspero G, Cipriani G, Adam-Blondon A-F, Testolin R: Linkage maps of grapevine displaying the chromosomal locations of 420 microsatellite markers and 82 markers for R-gene candidates. Theor Appl Genet. 2007, 114: 1249-1263. 10.1007/s00122-007-0516-2.
Pelsy F: Untranslated leader region polymorphism of Tvv1, a retrotransposon family, is a novel marker useful for analyzing genetic diversity and relatedness in the genus Vitis. Theor Appl Genet. 2007, 116: 15-27. 10.1007/s00122-007-0643-9.
Galet P: Cépages et vignobles de France. Les vignes américaines. 1988
Genoscope BLAST Server. [http://www.cns.fr/cgi-bin/blast_server/projet_ML/blast.pl]
Kumar S, Tamura K, Nei M: MEGA3: Integrated software for Molecular Evolutionary Genetics Analysis and sequence alignment. Briefings in Bioinformatics. 2004, 5: 150-163. 10.1093/bib/5.2.150.
EMBOSS Pairwise Alignment Algorithms. [http://www.ebi.ac.uk/emboss/align/]
Blat-Search. [http://www.genoscope.cns.fr/blat-server/cgi-bin/vitis/webBlat]
Gaut BS, Morton BR, McCaig BC, Clegg MT: Substitution rate comparisons between grasses and palms: Synonymous rate differences at the nuclear gene Adh parallel rate differences at the plastid gene rbcL. Proc Natl Acad Sci USA. 1996, 93: 10274-10279. 10.1073/pnas.93.19.10274.
Kapitonov VV, Jurka J: A universal classification of eukaryotic transposable elements implemented in Repbase. Nat Rev Genet. 2008, 9: 411-412. 10.1038/nrg2165-c1.
Acknowledgements
The authors thank Lucie Bevilacqua-Schehrer and Emilie Haegy for valuable technical assistance and Didier Merdinoglu for helpful support. Cedric Moisy is a doctoral fellow supported by INRA and the Conseil Régional d'Alsace and Keith Garrison was a doctoral fellow, with this work supported by Jastro-Shields funding. All experiments described in this study comply with the current laws of France.
Author information
Authors and Affiliations
Corresponding author
Additional information
Authors' contributions
CM participated in the design of the study, carried out the BLAT and the phylogenic analysis and helped to draft the manuscript. KG and CPM selected the system for retroelement sequence isolation, performed the molecular genetic studies and helped to draft the manuscript. FP conceived the study, carried out the BLAST and S-SAP analysis and drafted the manuscript. All authors read and approved the final manuscript.
Electronic supplementary material
12864_2008_1662_MOESM2_ESM.pdf
Additional file 2:Sequence characteristics, location, and accession numbers of the ten canonical elements identified in the grapevine genome sequence.(PDF 33 KB)
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Moisy, C., Garrison, K.E., Meredith, C.P. et al. Characterization of ten novel Ty1/copia-like retrotransposon families of the grapevine genome. BMC Genomics 9, 469 (2008). https://doi.org/10.1186/1471-2164-9-469
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/1471-2164-9-469