Skip to main content
SpringerLink
Log in

Roller Compacted Concrete with Oil Shale Ash as a Replacement of Cement: Mechanical and Durability Behavior

  • Original Research Paper
  • Published:
International Journal of Pavement Research and Technology Aims and scope Submit manuscript

A Correction to this article was published on 05 October 2022

This article has been updated

Abstract

Oil shale is considered an important source of energy production; however, the burning of oil shale produces deposits that are difficult to be disposed of, which results in serious damage to the environment around us. Since Jordan contains abundant amounts of oil shale, the need to find alternative solutions for exploiting this deposit has become essential. This study aims to investigate the possibility of utilizing oil shale ash (OSA) in the cement industry as a partial replacement for cement in the production of roller-compacted concrete (RCC). Cement was replaced by OSA with replacement levels of 0%, 10%, 20%, 30%, and 40%. Standard cylinders, cubes, and prisms were used to examine the physical properties (density and porosity), mechanical properties (compressive strength, splitting tensile strength, flexural strength, and modulus of elasticity) and durability (Ultrasonic Pulse Velocity (UPV), and compressive strength after cycles of freezing–thawing) of RCC mixes. The results indicated that using OSA at different replacement levels has significantly affected the mechanical properties of RCC mixes as they decreased with the increase of OSA content in the mix but at different rates. The reduction in compressive strength, splitting strength, flexural strength, and modulus of elasticity of RCC was 18–42%, 27–37%, 3–61%, and 3–61%, respectively. However, RCC with OSA reached the required compressive stress for roller compacted concrete that could be used for public traffic or dams according to American Concrete Institute (ACI) requirements. The durability behavior was satisfactory in RCC with different OSA replacement levels compared to control RCC. Based on the experimental results, it is possible to use OSA in producing RCC for up to 30% as a main base coarse.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19

Similar content being viewed by others

Change history

References

  1. Aprianti, E., Shafigh, P., Bahri, S., & Farahani, J. N. (2015). Supplementary cementitious materials origin from agricultural wastes a review. Construction and Building Materials, 74, 176–187. https://doi.org/10.1016/j.conbuildmat.2014.10.010

    Article  Google Scholar 

  2. Celik, K., Jackson, M. D., Mancio, M., Meral, C., Emwas, A.-H., Mehta, P. K., et al. (2014). High-volume natural volcanic pozzolan and limestone powder as partial replacements for Portland cement in self-compacting and sustainable concrete. Cement and Concrete Composites, 45, 136–147. https://doi.org/10.1016/j.cemconcomp.2013.09.003

    Article  Google Scholar 

  3. Mirza, J. (2019). Reduction in ecology, environment, economy and energy in concrete industry using waste materials. In M. S. Kırgız (Ed.), The proceedings of abstracts book of the third annual international conference on eco-sustainable construction materials (August 26–29, 2019, p. 16), İstanbul, TR. ISBN: 978-605-031-179-2.

  4. Dabbas, M. A. (1997). Oil shale: hopes and ambitions (in Arabic). In Second Jordanian conference for mechanical engineering, JIMEC ’97. Amman-Jordan, JAE.

  5. Haddad, R. H., Ashteyat, A. M., & Lababneh, Z. K. (2018). Producing geopolymer composites using oil shale ash. Structural Concrete. https://doi.org/10.1002/suco.201800007

    Article  Google Scholar 

  6. Sharo, A. A., Ashteyat, A. M., Alawneh, A. S., & Bany Khaled, B. A. (2018). The use of oil shale fly ash to improve the properties of Irbid soil. World Journal of Engineering. https://doi.org/10.1108/wje-10-2017-0325

    Article  Google Scholar 

  7. Bourdot, A., Thiéry, V., Bulteel, D., & Hammerschlag, J.-G. (2016). Effect of burnt oil shale on ASR expansions: A petrographic study of concretes based on reactive aggregates. Construction and Building Materials, 112, 556–569. https://doi.org/10.1016/j.conbuildmat.2016.02

    Article  Google Scholar 

  8. Uibu, M., Somelar, P., Raado, L.-M., Irha, N., Hain, T., Koroljova, A., & Kuusik, R. (2016). Oil shale ash based backfilling concrete—Strength development, mineral transformations and leachability. Construction and Building Materials, 102, 620–630. https://doi.org/10.1016/j.conbuildmat.2015.10

    Article  Google Scholar 

  9. Seddik Meddah, M. (2015). Durability performance and engineering properties of shale and volcanic ashes concretes. Construction and Building Materials, 79, 73–82. https://doi.org/10.1016/j.conbuildmat.2015.01

    Article  Google Scholar 

  10. Raado, L.-M., Haın, T., Lıısma, E., & Kuusık, R. (2014). Composıtıon and propertıes of oıl shale ash concrete. Oil Shale, 31(2), 147. https://doi.org/10.3176/oil.2014.2.05

    Article  Google Scholar 

  11. Raado, L.-M., Tuisk, T., Rosenberg, M., & Hain, T. (2011). Durability behavior of Portland burnt oil shale cement concrete. Oil Shale, 28, 507–515. https://doi.org/10.3176/oil.2011.4.04

    Article  Google Scholar 

  12. Usta, M. C., Yörük, C. R., Hain, T., Paaver, P., Snellings, R., Rozov, E., & Uibu, M. (2020). Evaluation of new applications of oil shale ashes in building materials. Minerals, 10(9), 765. https://doi.org/10.3390/min10090765

    Article  Google Scholar 

  13. Vatin, N., Barabanshchikov, Y., Usanova, K., Akimov, S., Kalachev, A., & Uhanov, A. (2020). Cement-based materials with oil shale fly ash additives. IOP Conference Series: Earth and Environmental Science, 578, 012043. https://doi.org/10.1088/1755-1315/578/1/012043

    Article  Google Scholar 

  14. Ghannam, S. (2017). The effect of partial replacement of cement by virgin oil shale powder and/or oil shale ash on properties of cement mortar (comparative study). Journal of Engineering and Applied Science, 12, 5281–5285. https://doi.org/10.3923/jeasci.2017.5281.5285

    Article  Google Scholar 

  15. Ashteyat, A., Haddad, R. H., & Yamin, M. M. (2012). Production of self-compacting concrete using Jordanian oil shale ash. Jordan Journal of Civil Engineering, 6, 202–214.

    Google Scholar 

  16. Abdel had, N., & Abdelhad, M. (2018). Characterızatıon and utılızatıon of oıl shale ash mıxed wıth granıtıc and marble wastes to produce lıghtweıght brıcks. Oil shale, 35(1), 56. https://doi.org/10.3176/oil.2018.1.04

    Article  Google Scholar 

  17. Nov, S., Cohen, H., & Knop, Y. (2020). Treated oil shale ashes as a substitute for natural aggregates, sand, and cement in concrete. Israel Journal of Chemistry, 60, 638–643. https://doi.org/10.1002/ijch.202000029

    Article  Google Scholar 

  18. Irha, N., Uibu, M., Jefimova, J., Raado, L.-M., Hain, T., & Kuusik, R. (2014). Leaching behaviour of Estonian oil shale ash-based construction mortars. Oil Shale., 31, 394–411. https://doi.org/10.3176/oil.2014.4.07

    Article  Google Scholar 

  19. Smadi, M. M., & Haddad, R. H. (2003). The use of oil shale ash in Portland cement concrete. Cement and Concrete Composites, 25(1), 43–50. https://doi.org/10.1016/S0958-9465(01)00054-3

    Article  Google Scholar 

  20. Smadi, M., Yeginobali, A., & Khedaywi, T. (1989). Potential uses of Jordanian spent oil shale ash as a cementive material. Magazine of Concrete Research, 41(148), 183–190. https://doi.org/10.1680/macr.1989.41.148.18

    Article  Google Scholar 

  21. Attom, M. F., Smadi, M., & Khedaywi, T. (1998). The use of Jordanian oil shale ash as a soil stabilizing agent. Soils and Foundations, 38(3), 67–74. https://doi.org/10.3208/sandf.38.3_67

    Article  Google Scholar 

  22. Kaljuvee, T., Štubna, I., Húlan, T., Csáki, Š, Uibu, M., & Jefimova, J. (2019). Influence of waste products from electricity and cement industries on the thermal behaviour of Estonian clay from Kunda deposit. Journal of Thermal Analysis and Calorimetry, 138, 2635–2650. https://doi.org/10.1007/s10973-019-08319-0

    Article  Google Scholar 

  23. Salama, A. H. E. (2022). Effect of grinded oil shale inclusion on some properties of concrete mixtures. AIP Conference Proceedings, 2440, 030013. https://doi.org/10.1063/5.0074988

    Article  Google Scholar 

  24. M. Al-Hassan, “Behavior of concrete made using oil-shale ash and cement mixtures,” (Estonian Academy Publishers, 2006), Vol. 23, No. 2, pp. 135–143

  25. Aljbour, S. H. (2016). Production of ceramics from waste glass and Jordanian oil shale ash. Oil Shale, 33, 260–271. https://doi.org/10.3176/oil.2016.3.05

    Article  Google Scholar 

  26. Gosselin, P., Hrudey, S. E., Naeth, M. A., Plourde, A., Therrien, R., Kraak, G. V., & Xu, Z. (2010). The Royal Society of Canada Expert Panel: Environmental and health impacts of Canada’s oil sands industry (p. 440). The Royal Society of Canada.

    Google Scholar 

  27. ACI. (2001). State of the-art report on roller compacted concrete pavement. American Concrete Institute report ACI.325.10-95.

  28. Kassem, M., Soliman, A., & Naggar, H. E. (2018). Sustainable approach for recycling treated oil sand waste in concrete: Engineering properties and potential applications. Journal of Cleaner Production, 204, 50–59.

    Article  Google Scholar 

  29. Schrader, E. K. (2001). Roller compacted concrete for RCC dams—A general overview with comments pertinent to high vs low cementitious content and the cine dam.

  30. Lopez-Uceda, A., Agrela, F., Cabrera, M., Ayuso, J., & López, M. (2016). Mechanical performance of roller compacted concrete with recycled concrete aggregates. Road Materials and Pavement Design, 19(1), 36–55. https://doi.org/10.1080/14680629.2016.1232659

    Article  Google Scholar 

  31. Marchand, J., Gagne, R., Ouellet, E., & Lepage, S. (1997). Mixture proportioning of roller compacted concrete: A review. Advance Concrete Technology 457–486 (ACI Special Publication, SP-171).

  32. Debbarma, S., Singh, S., & Ransinchung, G. D. R. (2019). Laboratory investigation on the fresh, mechanical, and durability properties of roller compacted concrete pavement containing reclaimed asphalt pavement aggregates. Transportation Research Record: Journal of the Transportation Research Board.

  33. Ashteyat, A., Obaidat, A., Kirgiz, M., et al. (2022). Production of roller compacted concrete made of recycled asphalt pavement aggregate and recycled concrete aggregate and silica fume. International Journal of Pavement Research Technology, 15, 987–1002. https://doi.org/10.1007/s42947-021-00068-4

    Article  Google Scholar 

  34. Rakesh, P., Maddala, P., Priyanka, M. L., & Barhmaiah, B. (2021). Strength and behaviour of roller compacted concrete using crushed dust. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.12.875

    Article  Google Scholar 

  35. Tavakoli, D., Sakenian Dehkordi, R., Divandari, H., & de Brito, J. (2020). Properties of roller-compacted concrete pavement containing waste aggregates and nano SiO2. Construction and Building Materials, 249, 118747. https://doi.org/10.1016/j.conbuildmat.2020

    Article  Google Scholar 

  36. Lam, M.N.-T., Jaritngam, S., & Le, D.-H. (2017). Roller-compacted concrete pavement made of electric arc furnace slag aggregate: Mix design and mechanical properties. Construction and Building Materials, 154, 482–495. https://doi.org/10.1016/j.conbuildmat.2017.07

    Article  Google Scholar 

  37. Madhkhan, M., Azizkhani, R., & Torki Harchegani, M. E. (2012). Effects of pozzolans together with steel and polypropylene fibers on mechanical properties of RCC pavements. Construction and Building Materials, 26(1), 102–112. https://doi.org/10.1016/j.conbuildmat.2011.05.009

    Article  Google Scholar 

  38. Rahmani, E., Sharbatdar, M. K., & Beygi, H. A. M. (2020). A comprehensive investigation into the effect of water to cement ratios and cement contents on the physical and mechanical properties of roller compacted concrete pavement (RCCP). Construction and Building Materials, 253, 119177. https://doi.org/10.1016/j.conbuildmat.2020.11

    Article  Google Scholar 

  39. Settari, C., Debieb, F., Hadj Kadri, E., & Boukendakdji, O. (2015). Assessing the effects of recycled asphalt pavement materials on the performance of roller compacted concrete. Construction and Building Materials, 101, 617–621.

    Article  Google Scholar 

  40. Hesami, S., Modarres, A., Soltaninejad, M., & Madani, H. (2016). Mechanical properties of roller compacted concrete pavement containing coal waste and limestone powder as partial replacements of cement. Construction and Building Materials, 111, 625–635.

    Article  Google Scholar 

  41. Bastani, M., & Behfarnia, K. (2020). Application of alkali-activated slag in roller compacted concrete. Int. J. Pavement Res. Technol., 13, 324–333. https://doi.org/10.1007/s42947-020-0088-y

    Article  Google Scholar 

  42. Bayqra, S. H., Mardani-Aghabaglou, A., & Ramyar, K. (2022). Physical and mechanical properties of high volume fly ash roller compacted concrete pavement (a laboratory and case study). Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2021.125664

    Article  Google Scholar 

  43. Rooholamini, H., Sedghi, R., Ghobadipour, B., & Adresi, M. (2019). Effect of electric arc furnace steel slag on the mechanical and fracture properties of roller-compacted concrete. Construction and Building Materials, 211, 88–98. https://doi.org/10.1016/j.conbuildmat.2019.03.223

    Article  Google Scholar 

  44. Rahmani, E., Sharbatdar, M. K., & Beygi, H. A. (2021). Influence of cement contents on the fracture parameters of Roller compacted concrete pavement (RCCP). Construction and Building Materials, 289, 123159. https://doi.org/10.1016/j.conbuildmat.2021.123159

    Article  Google Scholar 

  45. Krishna, S., Rao, P., Sravana, T., & Rao, C. (2016). Experimental studies in Ultrasonic Pulse Velocity of roller compacted concrete pavement containing fly ash and M-sand. International Journal of Pavement Research Technology, 9, 289–301. https://doi.org/10.1016/j.ijprt.2016.08.003

    Article  Google Scholar 

  46. Jahanbakhsh, P., Saberi, K. F., Soltaninejad, M., et al. (2022). Laboratory investigation of modified roller compacted concrete pavement (RCCP) containing macro synthetic fibers. International Journal of Pavement Research Technology. https://doi.org/10.1007/s42947-022-00161-2

    Article  Google Scholar 

  47. Aghaeipour, A., & Madhkhan, M. (2017). Effect of ground granulated blast furnace slag (GGBFS) on RCCP durability. Construction and Building Materials, 141, 533–541. https://doi.org/10.1016/j.conbuildmat.2017.03.019

    Article  Google Scholar 

  48. Aghayan, I., Khafajeh, R., & Shamsaei, M. (2020). Life cycle assessment, mechanical properties, and durability of roller compacted concrete pavement containing recycled waste materials. International Journal of Pavement Research and Technology. https://doi.org/10.1007/s42947-020-0217-7

    Article  Google Scholar 

  49. Hazaree, C., Ceylan, H., & Wang, K. (2011). Influences of mixture composition on properties and freeze-thaw resistance of RCC. Construction and Building Materials, 25, 313–319.

    Article  Google Scholar 

  50. Modarres, A., & Hosseini, Z. (2014). Mechanical properties of roller compacted concrete containing rice husk ash with original and recycled asphalt pavement material. Materials & Design, 64, 227–236. https://doi.org/10.1016/j.matdes.2014.07.072

    Article  Google Scholar 

  51. Ghahari, S. A., Mohammadi, A., & Ramezanianpour, A. A. (2017). Performance assessment of natural pozzolan roller compacted concrete pavements. Case Studies in Construction Materials, 7, 82–90. https://doi.org/10.1016/j.cscm.2017.03.004

    Article  Google Scholar 

  52. Algin, Z., & Gerginci, S. (2020). Freeze-thaw resistance and water permeability properties of roller compacted concrete produced with macro synthetic fibre. Construction and Building Materials, 234, 117382. https://doi.org/10.1016/j.conbuildmat.2019.11

    Article  Google Scholar 

  53. Mardani-Aghabaglou, A., Andiç-Çakir, Ö., & Ramyar, K. (2013). Freeze–thaw resistance and transport properties of high-volume fly ash roller compacted concrete designed by maximum density method. Cement and Concrete Composites, 37, 259–266. https://doi.org/10.1016/j.cemconcomp.2013.01

    Article  Google Scholar 

  54. Abbaszadeh, R., & Modarres, A. (2017). Freeze-thaw durability of non-air-entrained roller compacted concrete designed for pavement containing cement kiln dust. Cold Regions Science and Technology, 141, 16–27. https://doi.org/10.1016/j.coldregions.2017.05.007

    Article  Google Scholar 

  55. Ashteyat, A. M., Al Rjoub, Y. S., Murad, Y., & Asaad, S. (2019). Mechanical and durability behaviour of roller-compacted concrete containing white cement by pass dust and polypropylene fibre. European Journal of Environmental and Civil Engineering. https://doi.org/10.1080/19648189.2019.1652694

    Article  Google Scholar 

  56. Fakhri, M., & Saberik, F. (2016). The effect of waste rubber particles and silica fume on the mechanical properties of roller compacted concrete pavement. Journal of Cleaner Production, 129, 521–530. https://doi.org/10.1016/j.jclepro.2016.04.017

    Article  Google Scholar 

  57. Boussetta, I., El, S., Khay, E., & Neji, J. (2018). Experimental testing and modelling of roller compacted concrete incorporating RAP waste as aggregates. European Journal of Environmental and Civil Engineering, 8189, 1–15. https://doi.org/10.1080/19648189.2018.1482792

    Article  Google Scholar 

  58. Mardani-Aghabaglou, A., & Ramyar, K. (2013). Mechanical properties of high-volume fly ash roller compacted concrete designed by maximum density method. Construction and Building Materials, 38, 356–364. https://doi.org/10.1016/j.conbuildmat.2012.07.109

    Article  Google Scholar 

  59. Debbarma, S., & Ransinchung, R. N. (2020). Achieving sustainability in roller compacted concrete pavement mixes using reclaimed asphalt pavement aggregates – state of the art review. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2020.125078

    Article  Google Scholar 

  60. ASTM C128-15. (2015). Standard test method for relative density (specific gravity) and absorption of fine aggregate. ASTM International. www.astm.org.

  61. ASTM C136/C136M-14. (2014). Standard test method for sieve analysis of fine and coarse aggregates. ASTM International. www.astm.org.

  62. ASTM C1435/C1435M-14 (2014). Standard practice for molding roller-compacted concrete in cylinder molds using a vibrating hammer. ASTM International. www.astm.org

  63. ASTM C138/C138M-17a. (2017). Standard test method for density (unit weight), yield, and air content (gravimetric) of concrete. ASTM International.

  64. ASTM C642-13 (2013). Standard test method for density, absorption, and voids in hardened concrete. ASTM International. www.astm.org.

  65. ASTM C39/C39M-18. (2018). Standard test method for compressive strength of cylindrical concrete specimens. ASTM International. www.astm.org.

  66. ASTM C496/C496M-17. (2017). Standard test method for splitting tensile strength of cylindrical concrete specimens. ASTM International. www.astm.org.

  67. ASTM C293/C293M-16. (2016) Standard test method for flexural strength of concrete (using simple beam with center-point loading). ASTM International. www.astm.org.

  68. ASTM C469/C469M-14. (2014). Standard test method for static modulus of elasticity and poisson’s ratio of concrete in compression. ASTM International. www.astm.org.

  69. ASTM C666/C666M-15. (2015). Standard test method for resistance of concrete to rapid freezing and thawing. ASTM International. www.astm.org.

  70. ASTM C1723-16. Standard guide for examination of hardened concrete using scanning electron microscopy.

  71. Berber, H., Tamm, K., Leinus, M.-L., Kuusik, R., Tõnsuaadu, K., Paaver, P., & Uibu, M. (2020). Accelerated carbonation technology granulation of industrial waste: effects of mixture composition on product properties. Waste Management Research, 38, 142–155. https://doi.org/10.1177/0734242X19886646

    Article  Google Scholar 

  72. Radwan, M. M., Farag, L. M., Abo-El-Enein, S. A., & Abd El-Hamida, H. K. (2013). Alkali activation of blended cements containing oil shale ash”. Construction and Building Materials, 40, 367–377.

    Article  Google Scholar 

  73. ASTM C 1365-18. Standard test method for determination of the proportion of phases in Portland cement and Portland-cement clinker using X-ray powder diffraction analysis. ASTM International. www.astm.org.

  74. Raado, L.-M., Kuusik, R., Hain, T., Uibu, M., & Somelar, P. (2014). Oil shale ash based stone formation hydration, hardening dynamics and phase transformations. Oil Shale, 31(1), 91–101. https://doi.org/10.3176/oil.2014.1.09

    Article  Google Scholar 

  75. Omran, A., Harbec, D., Tagnit-Hamou, A., & Gagne, R. (2017). Production of roller-compacted concrete using glass powder: Field study. Construction and Building Materials, 133, 450–458. https://doi.org/10.1016/j.conbuildmat.2016.1

    Article  Google Scholar 

  76. Portland Cement Association. (2010). Guide for roller-compacted concrete pavements.

  77. Saad Issa Sarsam. (2020). Correlating the durability properties (porosity, density, and absorption) of roller compacted concrete pavement. Journal of Cement Based Composites, 3, 23–27.

    Google Scholar 

  78. Whitehurst, E. A. (1951). Soniscope test concrete structure. J Am Concr Inst, 47, 443–444.

    Google Scholar 

  79. Harrington, D., Abdo, F., Adaska, W., Hazaree, C. V., Ceylan, H., & Bektas, F. (2010). Guide for roller-compacted concrete pavements. In Trans Project Rep. 102.

Download references

Acknowledgement

The authors wish to acknowledge the financial support provided by the deanship of research at Jordan University of Science and Technology via a research grant, (number 112/2017). The authors wish to acknowledge the assistance of the technicians at the civil engineering laboratories.

Author information

Authors and Affiliations

  1. Department of Civil Engineering, The University of Jordan, Amman, 11942, Jordan

    Ahmed M. Ashteyat & Mu’atsem Abdel-Jaber

  2. Department of Civil Engineering, Jordan University of Science and Technology, Irbid, Jordan

    Yousef S. Al Rjoub & Amani Smadi

  3. Civil Engineering Department, Philadelphia University, Amman, Jordan

    Ala’ Taleb Obaidat

  4. Istanbul Sabahattin Zaim University, Istanbul, Turkey

    Mehmet Kirgiz

  5. Department of Civil Engineering, University of Jordan on Sabbatical leave at Al-Ahliyya Amman University, Amman, 19328, Jordan

    Mu’atsem Abdel-Jaber

Authors
  1. Ahmed M. Ashteyat
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yousef S. Al Rjoub
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Ala’ Taleb Obaidat
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Mehmet Kirgiz
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Mu’atsem Abdel-Jaber
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Amani Smadi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Ahmed M. Ashteyat.

Ethics declarations

Conflict of interest

The authors declare no conflict of interest.

Additional information

The original online version of this article was revised: The Acknowledgement section was missing from this article

Rights and permissions

Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ashteyat, A.M., Al Rjoub, Y.S., Obaidat, A.T. et al. Roller Compacted Concrete with Oil Shale Ash as a Replacement of Cement: Mechanical and Durability Behavior. Int. J. Pavement Res. Technol. 17, 151–168 (2024). https://doi.org/10.1007/s42947-022-00225-3

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s42947-022-00225-3

Keywords

Search

Navigation