Abstract
Carbon nanotubes (CNTs) can support the building of flexible and porous scaffolds for bone regeneration. Various studies have looked at the mixing of CNTs with hydroxyapaptite for the formulation of bone implants. In the present work, we report the one step preparation and characterisation of chitosan/hydroxyapatite/CNTs composite materials obtained by wet precipitation of hydroxyapatite (HA) in the presence of chitosan or its amphiphilic derivative N-octyl-O-sulphate chitosan and CNTs. The in situ precipitation of HA assured inclusion of the polysaccharide and the CNTs in the HA structure and provided materials with the ability to control the release of different model drugs.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Ku SH, Lee M, Park CB. Carbon-based nanomaterials for tissue engineering. Advanced Healthcare Materials 2013, 2: 244–260.
Gao C, Guo Z, Liu J-H, et al. The new age of carbon nanotubes: An updated review of functionalized carbon nanotubes in electrochemical sensors. Nanoscale 2012, 4: 1948–1963.
Roldo M, Fatouros DG. Biomedical applications of carbon nanotubes. Annu Rep Prog Chem, Sect C: Phys Chem 2013, 109: 10–35.
Tonelli FM, Santos AK, Gomes KN, et al. Carbon nanotube interaction with extracellular matrix proteins producing scaffolds for tissue engineering. Int J Nanomedicine 2012, 7: 4511–4529.
Wang W, Zhu Y, Watari F, et al. Carbon nanotubes/hydroxyapatite nanocomposites fabricated by spark plasma sintering for bonegraft applications. Appl Surf Sci 2012, 262: 194–199.
Li X, Liu H, Niu X, et al. The use of carbon nanotubes to induce osteogenic differentiation of human adiposederived MSCs in vitro and ectopic bone formation in vivo. Biomaterials 2012, 33: 4818–4827.
Ciapetti G, Granchi D, Devescovi V, et al. Enhancing osteoconduction of PLLA-based nanocomposite scaffolds for bone regeneration using different biomimetic signals to MSCs. Int J Mol Sci 2012, 13: 2439–2458.
Hirata E, Akasaka T, Uo M, et al. Carbon nanotube-coating accelerated cell adhesion and proliferation on poly (L-lactide). Appl Surf Sci 2012, 262: 24–27.
Pan L, Pei X, He R, et al. Multiwall carbon nanotubes/polycaprolactone composites for bone tissue engineering application. Colloid Surface B 2012, 93: 226–234.
Ormsby R, McNally T, O’Hare P, et al. Fatigue and biocompatibility properties of a poly(methyl methacrylate) bone cement with multi-walled carbon nanotubes. Acta Biomater 2012, 8: 1201–1212.
Roldo M, Fatouros DG. Chitosan-derivative based hydrogels as drug delivery platforms. In Active Implants and Scaffolds for Tissue Regeneration. Zilberman M, Ed. Springer Berlin Heidelberg, 2011: 351–376.
Im O, Li J, Wang H, et al. Biomimetic three-dimensional nanocrystalline hydroxyapatite and magnetically synthesized single-walled carbon nanotube chitosan nanocomposite for bone regeneration. Int J Nanomedicine 2012, 7: 2087–2099
Fonseca-García A, Mota-Morales JD, Quintero-Ortega IA, et al. Effect of doping in carbon nanotubes on the viability of biomimetic chitosan–carbon nanotubes–hydroxyapatite scaffolds. J Biomed Mater Res A 2014, 102: 3341–3351.
Lu XY, Qiu T, Wang XF, et al. Preparation of foam-like carbon nanotubes/hydroxyapatite composite scaffolds with superparamagnetic properties. Appl Surf Sci 2012, 262: 227–230.
Green S, Roldo M, Douroumis D, et al. Chitosan derivatives alter release profiles of model compounds from calcium phosphate implants. Carbohyd Res 2009, 344: 901–907.
Piovesan S, Cox PA, Smith JR, et al. Novel biocompatible chitosan decorated single-walled carbon nanotubes (SWNTs) for biomedical applications: Theoretical and experimental investigations. Phys Chem Chem Phys 2010, 12: 15636–15643.
Tanase CE, Popa MI, Verestiuc L. Chitosan–hydroxyapatite composite obtained by biomimetic method as new bone substitute. In Proceedings of Advanced Technologies for Enhanced Quality of Life, 2009: 42–46.
Tanase CE, Popa MI, Verestiuc L. Biomimetic bone scaffolds based on chitosan and calcium phosphates. Mater Lett 2011, 65: 1681–1683.
Cheng ZH, Yasukawa A, Kandori K, et al. FTIR study on incorporation of CO2 into calcium hydroxyapatite. J Chem Soc, Faraday Trans 1998, 94: 1501–1505.
Danilchenko SN, Kalinkevich OV, Pogorelov MV, et al. Chitosan–hydroxyapatite composite biomaterials made by a one step co-precipitation method: Preparation, characterization and in vivo tests. Journal of Biological Physics and Chemistry 2009, 9: 119–126.
Weiner S, Bar-Yosef O. States of preservation of bones from prehistoric sites in the Near East: A survey. J Archaeol Sci 1990, 17: 187–196.
Yasmeen S, Lo MK, Bajracharya S, et al. Injectable scaffolds for bone regeneration. Langmuir 2014, 30: 12977–12985.
Reyes-Gasga J, Martínez-Piñeiro EL, Rodríguez-Álvarez G, et al. XRD and FTIR crystallinity indices in sound human tooth enamel and synthetic hydroxyapatite. Mater Sci Eng C 2013, 33: 4568–4574.
Paul R, Kumbhakar P, Mitra AK. Blue–green luminescence by SWCNT/ZnO hybrid nanostructure synthesized by a simple chemical route. Physica E 2010, 43: 279–284.
Chung S, Kang H, Ocon JD, et al. Enhanced electrical and mass transfer characteristics of acid-treated carbon nanotubes for capacitive deionization. Curr Appl Phys 2015, 15: 1539–1544.
Wang Y, Yang C, Chen X, et al. Biomimetic formation of hydroxyapatite/collagen matrix composite. Adv Eng Mater 2006, 8: 97–100.
Fatouros DG, Power K, Kadir O, et al. Stabilisation of SWNTs by alkyl-sulfate chitosan derivatives of different molecular weight: Towards the preparation of hybrids with anticoagulant properties. Nanoscale 2011, 3: 1218–1224.
Roldo M, Power K, Smith JR, et al. N-Octyl-O-sulfate chitosan stabilises single wall carbon nanotubes in aqueous media and bestows biocompatibility. Nanoscale 2009, 1: 366–373.
Correlo VM, Boesel LF, Bhattacharya M, et al. Hydroxyapatite reinforced chitosan and polyester blends for biomedical applications. Macromol Mater Eng 2005, 290: 1157–1165.
Bansal S, Chauhan V, Sharma S, et al. Evaluation of hydroxyapatite and beta-tricalcium phosphate mixed with bone marrow aspirate as a bone graft substitute for posterolateral spinal fusion. Indian J Orthop 2009, 43: 234–239.
Author information
Authors and Affiliations
Corresponding author
Additional information
This article is published with open access at Springerlink.com
Open Access The articles published in this journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Costantini, L., Bouropoulos, N., Fatouros, D.G. et al. Synthesis of carbon nanotubes loaded hydroxyapatite: Potential for controlled drug release from bone implants. J Adv Ceram 5, 232–243 (2016). https://doi.org/10.1007/s40145-016-0195-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40145-016-0195-z