Skip to main content
SpringerLink
Log in

Citric acid crosslinking of poly(vinyl alcohol)/starch/graphene nanocomposites for superior properties

  • Original Paper
  • Published:
Iranian Polymer Journal Aims and scope Submit manuscript

Abstract

Polyvinyl(alcohol)/starch/graphene nanocomposites with enhanced properties were prepared by solution mixing and casting process with the aid of glycerol as plasticizer and citric acid (CA) as crosslinker. The dispersion of graphene in water was made by sonication prior to mixing it with PVA/starch solution. The effect of varying the concentration of CA crosslinker in PVA/starch nanocomposite with 0.5 wt% of graphene was studied in detail. The structural changes, properties and morphologies were characterized by different techniques. The FTIR results revealed that the crosslinking reaction enhanced the interaction between the hydroxyl groups in PVA and/or starch and the oxygen-containing groups present on the graphene sheets. The mechanical properties were also improved by the crosslinking reaction and reinforcing with graphene. The formation of PVA crystal from solution was interrupted to a large extent by the interface at the amorphous zone of polymers and also the crosslinks between the PVA and starch polymer chains. The total crystallinity of the system was found to decrease with increase in degree of crosslinking. There was a marked increase in the thermal stability as the blend system was crosslinked with CA. CA crosslinking produced compact bulk morphology and improved the homogeneity between PVA and starch. The results of this study illustrate that citric acid can be an effective crosslinker and/or compatibilizer in PVA/starch/graphene nanocomposites for improving properties, and for this reason it is a candidate to replace non-biodegradable plastic films in food packaging sector.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. Ammala A, Stuart B, Katherine D, Eustathios P, Parveen S, Susan W, Qiang Y, Long Y, Colin P, Leong KH (2011) An overview of degradable and biodegradable polyolefins. Prog Polym Sci 36:1015–1049

    Article  CAS  Google Scholar 

  2. Ojijo V, Suprakas SR (2013) Processing strategies in bionanocomposites. Prog Polym Sci 38:1543–1589

    Article  CAS  Google Scholar 

  3. Gaaz TS, Abu BS, Majid NA, Abdul AHK, Abu Bakar M, Al-Amiery AA (2015) Properties and applications of polyvinyl alcohol, halloysite nanotubes and their nanocomposites. Molecules 20:22833–22847

    Article  CAS  Google Scholar 

  4. Das K, Ray D, Bandyopadhyay NR, Gupta A, Sengupta S, Sahoo S, Mohanty A, Misra M (2010) Preparation and characterization of cross-linked starch/poly(vinyl alcohol) green films with low moisture absorption. Ind Eng Chem Res 49:2176–2185

    Article  CAS  Google Scholar 

  5. Chaleat CM, Halley PJ, Truss RW (2012) Study on the phase separation of plasticized starch/poly(vinyl alcohol) blends. Polym Degrad Stab 97:1930–1939

    Article  CAS  Google Scholar 

  6. Aydin AA, Ilberg V (2016) Effect of different polyol-based plasticizers on thermal properties of polyvinyl alcohol/starch blends. Carbohydr Polym 136:441–448

    Article  CAS  Google Scholar 

  7. Chai WL, Chow JD, Chen CC (2012) Effects of modified starch and different molecular weight polyvinyl alcohols on biodegradable characteristics of polyvinyl alcohol/starch blends. J Polym Environ 20:550–564

    Article  CAS  Google Scholar 

  8. Tian H, Yan J, Rajulu AV, Xiang A, Luo X (2017) Fabrication and properties of polyvinyl alcohol/starch blend films: effect of composition and humidity. Int J Biol Macromolec 96:518–523

    Article  CAS  Google Scholar 

  9. Guo M, Stuckey DC, Murphy RJ (2013) End-of-life of starch–polyvinyl alcohol biopolymers. Bioresour Technol 127:256–266

    Article  CAS  Google Scholar 

  10. Tang X, Alavi S (2011) Recent advances in starch, PVA-based polymer blends, nanocomposites and their biodegradability. Carbohydr Polym 85:7–16

    Article  CAS  Google Scholar 

  11. Panaitescu DM, Frone AN, Ghiurea M, Chiulan I (2015) Influence of storage conditions on starch/PVA films containing cellulose nanofibers. Ind Crops Prod 70:170–177

    Article  CAS  Google Scholar 

  12. Tee TT, Sin LT, Gobinath R, Bee ST, Hui D, Rahmat AR, Fang Q (2013) Investigation of nano-size montmorillonite on enhancing polyvinyl alcohol–starch blends prepared via solution cast approach. Compos B Eng 47:238–247

    Article  CAS  Google Scholar 

  13. Schedin F, Geim AK, Morozov SV, Hill EW, Blake P, Katsnelson MI, Novoselov KS (2007) Detection of individual gas molecules adsorbed on graphene. Nat Mater 6:652–655

    Article  CAS  Google Scholar 

  14. Liang J, Huang Y, Zhang L, Wang Y, Ma YF, Guo TY, Chen YS (2009) Molecular level dispersion of graphene into poly(vinyl alcohol) and effective reinforcement of their nanocomposites. Adv Funct Mater 19:2297–2302

    Article  CAS  Google Scholar 

  15. Li R, Liu C, Ma J (2011) Studies on the properties of graphene oxide reinforced starch biocomposites. Carbohydr Polym 84:631–637

    Article  CAS  Google Scholar 

  16. Peregrino PP, Maria JAS, da Silva MFP, Soler MAG, da Silva LFL, Moreira SGC, Paterno LG (2014) Thermal and electrical properties of starch graphene oxide nanocomposites improved by photochemical treatment. Carbohydr Polym 106:305–311

    Article  CAS  Google Scholar 

  17. Jose J, Al-Harthi MA, AlMa’adeed MA, Dakua JB, De SK (2015) Effect of graphene loading on thermomechanical properties of poly(vinyl alcohol)/starch blend. J Appl Polym Sci 132:41827

    Article  Google Scholar 

  18. Yoon SC, Park H (2006) Properties of starch-based blend films using citric acid as additive II. J Appl Polym Sci 100:2554–2560

    Article  CAS  Google Scholar 

  19. Mittal A, Garg S, Kohli D, Maiti M, Jana AK, Bajpai S (2016) Effect of cross linking of PVA/starch and reinforcement of modified barley husk on the properties of composite films. Carbohydr Polym 151:926–938

    Article  CAS  Google Scholar 

  20. Reddy N, Yang Y (2010) Citric acid cross-linking of starch films. Food Chem 118:702–711

    Article  CAS  Google Scholar 

  21. Cay A, Miraftab M (2013) Properties of electro-spun poly(vinyl alcohol) hydrogel nanofibers crosslinked with 1,2,3,4-butanetetracarboxylic acid. J Appl Polym Sci 129:3140–3149

    Article  CAS  Google Scholar 

  22. Sreekumar PA, Al-Harthi MA, De SK (2012) Reinforcement of starch/polyvinyl alcohol blend using nano-titanium dioxide. J Compos Mater 46:3181–3187

    Article  CAS  Google Scholar 

  23. Jose J, De SK, AlMa’adeed MA, Dakua JB, Sreekumar PA, Sougrat R, Al-Harthi MA (2014) Compatibilizing role of carbon nanotubes in poly(vinyl alcohol)/starch blend. Starch/Stärke 67:147–153

    Article  Google Scholar 

  24. Sreekumar PA, Al-Harthi MA, De SK (2012) Effect of glycerol on thermal and mechanical properties of polyvinyl alcohol/starch blends. J Appl Polym Sci 123:135–142

    Article  CAS  Google Scholar 

  25. Sreekumar PA, Al-Harthi MA, De SK (2012) Studies on compatibility of biodegradable starch/polyvinyl alcohol blends. Polym Eng Sci 52:2167–2172

    Article  CAS  Google Scholar 

  26. Nishio Y, Tatsuo H, Toshisada T, Manley RS (1989) Cellulose/poly(vinyl alcohol) blends: an estimation of thermodynamic polymer-polymer interaction by melting-point-depression analysis. Macromolecules 22:2547–2549

    Article  CAS  Google Scholar 

  27. Wolkers WF, Oliver AE, Tablin F, Crowe JH (2004) Fourier-transform infrared spectroscopy study of sugar glasses. Carbohydr Res 339:1077–1085

    Article  CAS  Google Scholar 

  28. Gohil JM, Bhattacharya A, Ray P (2006) Studies on the cross-linking of poly(vinyl alcohol). J Polym Res 13:161–169

    Article  CAS  Google Scholar 

  29. Tantis I, Psarras GC, Tasis D (2012) Functionalized grapheme-poly(vinyl alcohol) nanocomposites: physical and dielectric properties. eXPRESS Polym Lett 6:283–292

    Article  CAS  Google Scholar 

  30. Rui S, Jingliang B, Zizheng Z, Aichen Z, Dafu C, Xinhua Z, Liqun Z, Wei T (2008) The effect of citric acid on the structural properties and cytotoxicity of the polyvinyl alcohol/starch films when molding at high temperature. Carbohydr Polym 74:763–770

    Article  Google Scholar 

Download references

Acknowledgements

Thanks are due to the Deanship of Scientific Research for financial assistance through project number DSR IN121016.

Author information

Authors and Affiliations

  1. Center for Engineering Research (CER), King Fahd University of Petroleum and Minerals, 31261, Dhahran, Saudi Arabia

    Jobin Jose

  2. Department of Chemical Engineering, King Fahd University of Petroleum and Minerals, 31261, Dhahran, Saudi Arabia

    Mamdouh A. Al-Harthi

Authors
  1. Jobin Jose
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Mamdouh A. Al-Harthi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Jobin Jose.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Jose, J., Al-Harthi, M.A. Citric acid crosslinking of poly(vinyl alcohol)/starch/graphene nanocomposites for superior properties. Iran Polym J 26, 579–587 (2017). https://doi.org/10.1007/s13726-017-0542-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13726-017-0542-0

Keywords

Search

Navigation