Abstract
In this paper, the effect of the tip mass on the sensitivity of flexural vibration modes of an AFM rectangular cantilever has been studied and a characteristics equation for the AFM cantilever has been derived. Then, based on the characteristics equation, a closed form expression for the flexural modal sensitivity of the rectangular cantilever to the surface stiffness variations has been derived. Using numerical experiments, the effect of various tip masses on the sensitivity has been investigated. The results show that for low stiffness materials, the sensitivity of AFM cantilevers with smaller tip masses is more than the cantilever with greater tip masses. While for the materials with high stiffness, the difference in sensitivities is not significant. However, for the cantilevers with bigger tip masses sensitivity is higher.
Similar content being viewed by others
References
Rabe U., Turner J.A., Arnold W.: Analysis of the high-frequency response of atomic-force microscope cantilevers. Appl. Phys. A 66, S277–S282 (1998)
Turner J.A., Wiehn J.S.: Sensitivity of flexural and torsional vibration modes of atomic force microscope cantilevers to surface stiffness variations. Nanotechnology 12, 322–330 (2001)
Chang W.J., Fang T.H., Chou H.M.: Effect of interactive damping on sensitivity of rectangular AFM cantilevers. Phys. Lett. A 312, 158–165 (2003)
Espinoza-Beltrán F.J., Geng K., Muñoz Saldaña J., Rabe U., Hirsekorn S., Arnold W.: Simulation of vibrational resonances of stiff AFM cantilevers by finite element methods. New J. Phys. 11, 1–21 (2009)
Lee H.L., Chang W.J., Yang Y.C.: Flexural sensitivity of a V-shaped force microscope cantilever. Ultramicroscopy 108, 707–711 (2008)
Kahrobaiyan M.H., Ahmadian M.T., Haghighi P., Haghighi A.: Sensitivity and resonant frequency of an AFM with sidewall and top-surface probes for both flexural and torsional modes. Int. J. Mech. Sci. 52, 1357–1365 (2010)
Lee H.L., Chang W.J.: Sensitivity of V-shaped atomic force microscope cantilevers based on a modified couple stress theory. Microelectron. Eng. 88, 3214–3218 (2011)
Wu T.S., Chang W.J., Hsu J.C.: Effect of tip length and normal and lateral contact stiffness on the flexural vibration responses of atomic force microscope cantilevers. Microelectron. Eng. 71, 15–20 (2004)
Allen, M.S.; Sumali, H.; and Penegor, P.C.: Experimental/analytical evaluation of the effect of tip mass on atomic force microscope cantilever calibration. J. Dyn. Syst. Meas. Control 131, 064501–10 (2009)
Farrokh Payam A., Fathipour M.: Modeling and dynamic analysis of atomic force microscope based on euler-bernoulli beam theory. Digest J. Nanomater. Biostruct. 4(3), 565–578 (2009)
Farrokh Payam A., Fathipour M.: Study of the tip mass and interaction force effects on the frequency response and mode shapes of the AFM cantilever. Int. J. Adv. Manufac. Tech. 65, 957–966 (2013)
Jalili, N.; Dadfarnia, M.; Dawson, D.M.: Distributed-parameters base modeling and vibration analysis of micro-cantilevers used in atomic force microscopy. In: Proceedings of the 19th ASME Biennial ConfMechVib Noise, SympDyn Vibration Robotic Syst. Chicago, Illinois (2003)
Barr, E.J.: Modelling atomic force micrscopy (Using An Euler-Bernoulli Beam Equation). Department of Engineering Mathematics, University of Bristol, March (2006)
Kuo C.F. J., Su T.L., Zheng L., Chiu C.H.: Control system design for stability and precise positioning of atomic force microscopy probe. Poly. Plast. Tech. Eng. 46(9), 849–861 (2007)
Jalili N., Dadfarnia M., Dawson D.M.: A fresh insight into the microcantilever-sample interaction problem in non-contact atomic force microscopy. ASME J. Dyn. Syst. Meas. Control 126, 327–335 (2004)
Sinha A.: Nonlinear dynamics of atomic force microscope with PI feedback. J. Sound Vib. 288, 387–394 (2005)
Vazquez, R.; Rubio-Sierra, F.J.; Stark, R.W.: Transfer function analysis of a surface coupled atomic force microscope cantilever system. In: Proceedings of the of the 2006 American Control Conference, Minneapolis, Minnesota, USA, 14–16 June (2006)
Lozano, J.R.; Garcia, R.: Theory of phase spectroscopy in bimodal atomic force microscopy. Phys. Rev. B 79, 0141110–9 (2009)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Farrokh Payam, A., Fathipour, M. Effect of Tip Mass on Modal Flexural Sensitivity of Rectangular AFM Cantilevers to Surface Stiffness Variations. Arab J Sci Eng 39, 1393–1397 (2014). https://doi.org/10.1007/s13369-013-0682-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13369-013-0682-2