Abstract
Creep experiments of the TiAl alloy with high Nb content were conducted to consider both the temperature dependence and stress dependence of its creep behavior. The creep curves were characterized by Theta constitutive model, and Newton–Gauss method was applied to obtain the material parameters. Based on the rupture strain, the rupture life of the TiAl alloy was able to be predicted by Theta constitutive model. The results show that the creep curves of the TiAl alloy contain primary creep, secondary creep and tertiary creep stages, especially for the lower stress. The rupture life of the TiAl alloy decreases with the increase in either applied stress or temperature. Theta constitutive model is able to describe the creep deformation of the TiAl alloy accurately, and the predicted life agrees well with the experimental result.
Similar content being viewed by others
References
Liu Y, Hu R, Kou HC, Wang J, Zhang TB, Li JS, Zhang J. Solidification characteristics of high Nb-containing g-TiAl-based alloys with different aluminum contents. Rare Met. 2015;34(6):381.
Zhang X, Hu Y, Zhang L, Zheng W, Lin J. The precipitation processes of the γ1 phase in Ti–53Al–18Nb alloys. Scr Mater. 2012;66(7):467.
Lin YZ, Fu GS, Cao R, Chen JH, Hu DW. Compression damage and fracture behaviors of γ-TiAl based alloys. Chin J Rare Met. 2014;38(2):334.
Huang L, Chen Y, Kong F, Xu L, Xiao S. Direct rolling of Ti–6Al–4V–0.1B alloy sheets in the β phase region. Mater Sci Eng A. 2013;577:1.
Schwaighofer E, Rashkova B, Clemens H, Stark A, Mayer S. Effect of carbon addition on solidification behavior, phase evolution and creep properties of an intermetallic β-stabilized γ-TiAl based alloy. Intermetallics. 2014;46:173.
Cheng L, Chang H, Tang B, Kou H, Li J. Deformation and dynamic recrystallization behavior of a high Nb containing TiAl alloy. J Alloys Compd. 2013;552:363.
Zhang WJ, Liu ZC, Chen GL, Kim YW. Deformation mechanisms in a high-Nb containing γ-TiAl alloy at 900 °C. Mater Sci Eng A. 1999;271(1–2):416.
Vojtěch D, Popela T, Kubásek J, Maixner J, Novák P. Comparison of Nb- and Ta-effectiveness for improvement of the cyclic oxidation resistance of TiAl-based intermetallics. Intermetallics. 2011;19(4):493.
Schuh C, Dunand DC. An overview of power-law creep in polycrystalline β-titanium. Scripta Mater. 2001;45(12):1415.
Richart N, Molinari JF. Implementation of a parallel finite-element library: test case on a non-local continuum damage model. Finite Elem Anal Des. 2015;100:41.
Özden UA, Bezold A, Broeckmann C. Numerical simulation of fatigue crack propagation in WC/Co based on a continuum damage mechanics approach. Procedia Mater Sci. 2014;3:1518.
Do VNV, Lee CH, Chang KH. High cycle fatigue analysis in presence of residual stresses by using a continuum damage mechanics model. Int J Fatigue. 2015;70:51.
Manu CC, Birk AM, Kim IY. Uniaxial high-temperature creep property predictions made by CDM and MPC omega techniques for ASME SA 455 steel. Eng Fail Anal. 2009;16(4):1303.
Izaki T, Kobayashi T, Kusumoto J, Kanaya A. A creep life assessment method for boiler pipes using small punch creep test. Int J Press Vessels Pip. 2009;86(9):637.
Kim WG, Yin SN, Kim YW, Chang JH. Creep characterization of a Ni-based Hastelloy-X alloy by using theta projection method. Eng Fract Mech. 2008;75(17):4985.
Law M, Payten W, Snowden K. Modelling creep of pressure vessels with thermal gradients using Theta projection data. Int J Press Vessels Pip. 2002;79(12):847.
Brown SGR, Evans RW, Wilshire B. Alternative methods of parameter estimation in exponential descriptions of normal creep curves. Scripta Metall. 1987;21(2):239.
Brown SGR, Evans RW, Wilshire B. Creep strain and creep life prediction for the cast nickel-based superalloy IN-100. Mater Sci Eng A. 1986;84:147.
Acknowledgments
This study was financially supported by the National Natural Science Foundation for Young Scholars of China (No. 51401195) and the National Basic Research Program of China (No. 2011CB605506).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dong, CL., Yu, HC. & Jiao, ZH. Characterization of creep behavior of TiAl alloy with high Nb content at elevated temperatures. Rare Met. 35, 106–112 (2016). https://doi.org/10.1007/s12598-015-0643-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12598-015-0643-x