Skip to main content

Advertisement

Log in

Creep mechanism of as-cast Mg-6Al-6Nd alloy

  • Published:
Rare Metals Aims and scope Submit manuscript

Abstract

The creep mechanism of as-cast Mg-6Al-6Nd alloy was studied. The stress exponent for creep is 5.8 under the applied stresses of 50–70 MPa at 175°C. The activation energy for creep is 189 kJ·mol−1 under the applied stress of 70 MPa in the range of 150–200°C. The true stress exponent and threshold stress for creep are calculated as 4.96 and 10.2 MPa, respectively. The true stress exponent indicates that its creep mechanism belongs to the dislocation climb-controlled creep, which is in agreement with the microstructure changes before and after creep. The high value for stress exponent is attributed to the interaction of Al11Nd3 phase with dislocations. The activation energy is more than the self-diffusion activation energy of Mg, which is attributed to the load transfer taking place from the matrix to Al11Nd3 phase during creep.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Wang J.L., Yang J., Wu Y.M., Zhang H.J., and Wang L.M., Microstructures and mechanical properties of as-cast Mg-5Al-0.4Mn-xNd (x = 0, 1, 2 and 4) alloys, Mater. Sci. Eng. A, 2008, 472(1–2): 332.

    Google Scholar 

  2. Zhang J.H., Wang J., Qiu X., Zhang D.P., Tian Z., Niu X.D., Tang D.X., and Meng J., Effect of Nd on the microstructure, mechanical properties and corrosion behavior of die-cast Mg-4Al-based alloy, J. Alloys. Compd., 2008, 464(1–2): 556.

    Article  CAS  Google Scholar 

  3. Pekguleryuz M.O. and Kaya A.A., Creep resistant magnesium alloys for powertrain application, Adv. Eng. Mater., 2003, 5(12): 866.

    Article  CAS  Google Scholar 

  4. Langdon T.G., Identifying creep mechanisms at low stresses, Mater. Sci. Eng. A, 2000, 283(1–2): 266.

    Google Scholar 

  5. Dieringa H., Huang Y.D., Maier P., Hort N., and Kainer K.U., Tensile and compressive creep behaviour of Al2O3 short fiber reinforced magnesium alloy AE42, Mater. Sci. Eng. A, 2005, 410–411: 85.

    Google Scholar 

  6. Čadek J., Zhu S.J., and Milička K., Creep behaviour of ODS aluminium reinforced by silicon carbide particulates: ODS Al-30SiCp composite, Mater. Sci. Eng. A, 1998, 248(1–2): 65.

    Google Scholar 

  7. Li Y. and Langdon T. G., Comparison of the creep of an Al-6092 composite and unreinforced matrix alloy, Metall. Mater. Trans. A, 1998, 29(10): 2523.

    Article  Google Scholar 

  8. Pandey A.B., Mishra R.S., and Mahajan Y.R., Steady state creep behavior of silicon carbide particulate reinforced aluminum, Acta Metall. Mater., 1990, 38(11): 2149.

    Article  Google Scholar 

  9. Villars P. and Calvert L.D., Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, Desk Edition, American Society for Metals Park, ASM International, OH, 1997: 170; 442.

    Google Scholar 

  10. Zhang J.S., Deformation and Fracture of Materials at Elevated Temperatures, Edited by Tian S.Y., Yao Q.S., and Yu H.L., Science Press, Beijing, 2007: 108.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Yufeng Wu.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Wu, Y., Du, W., Zhang, Y. et al. Creep mechanism of as-cast Mg-6Al-6Nd alloy. Rare Metals 29, 538–541 (2010). https://doi.org/10.1007/s12598-010-0164-6

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12598-010-0164-6

Keywords

Navigation