Abstract
A new face-centered cubic (fcc) high entropy alloy system with non-equiatomic compositions has been designed by utilizing a CALculation of PHAse Diagram (CALPHAD) - type thermodynamic calculation technique. The new alloy system is based on the representative fcc high entropy alloy, the Cantor alloy which is an equiatomic Co- Cr-Fe-Mn-Ni five-component alloy, but fully or partly replace the cobalt by vanadium and is of non-equiatomic compositions. Alloy compositions expected to have an fcc single-phase structure between 700 °C and melting temperatures are proposed. All the proposed alloys are experimentally confirmed to have the fcc single-phase during materials processes (> 800 °C), through an X-ray diffraction analysis. It is shown that there are more chances to find fcc single-phase high entropy alloys if paying attention to non-equiatomic composition regions and that the CALPHAD thermodynamic calculation can be an efficient tool for it. An alloy design technique based on thermodynamic calculation is demonstrated and the applicability and limitation of the approach as a design tool for high entropy alloys is discussed.
Similar content being viewed by others
References
J.-W. Yeh, S.-K. Chen, S.-J. Lin, J.-Y. Gan, T.-S. Chin, S.-Y. Chang, et al. Adv. Eng. Mater. 6, 299 (2004).
B. Cantor, I. T. H. Chang, P. Knight, and A. J. B. Vincent, Mat. Sci. Eng. A 375-377, 213 (2004).
M.-H. Tsai and J.-W. Yeh, Mater. Res. Lett. 2, 107 (2014).
J.-W. Yeh, JOM 67, 2254 (2015).
B. Schuh, F. Mendez-Martin, B. Völker, E. P. George, H. Clemens, A. Hohenwarter, et al. Acta Mater. 96, 258 (2015).
J. Y. He, C. Zhu, D. Q. Zhou, W. H. Liu, T. G. Nieh, and Z. P. Lu, Intermetallics 55, 9 (2014).
E. J. Pickering, R. Muñoz-Moreno, H. J. Stone, and N. G. Jones, Scripta Mater. 113, 106 (2016).
C. Li, J. C. Li, M. Zhao, and Q. Jiang, J. Alloy. Compd. 475, 752 (2009).
D.-C. Tsai, F.-S. Shieu, S.-Y. Chang, H.-C. Yao, and M.-J. Deng, J. Electrochem. Soc.157, K52 (2010).
S. Varalakshmi, M. Kamaraj, and B. S. Murty, Metall. Mater. Trans. A 41, 2703 (2010).
H. Zhang, Y. Pan, and Y. Z. He, Mater. Design 32, 1910 (2011).
K. B. Zhang, Z. Y. Fu, J. Y. Zhang, W. M. Wang, H. Wang, Y. C. Wang, et al. Mat. Sci. Eng. A 508, 214 (2009).
Y. Zhang, Y. J. Zhou, J. P. Lin, G. L. Chen, and P. K. Liaw, Adv. Eng. Mater. 10, 534 (2008).
H. J. Park, Y. S. Na, S. H. Hong, J. T. Kim, Y. S. Kim, K. R. Lim, et al. Met. Mater. Int. 22, 551 (2016).
J. I. Lee, H. S. Oh, J. H. Kim, and E. S. Park, Korean J. Met. Mater. 55, 1 (2017).
B. Sundman, B. Jansson, and J.-O. Andersson, CALPHAD 9, 153 (1985).
TCFE2000: The Thermo-Calc Steels Database, upgraded by B.-J. Lee, B. Sundman at KTH, KTH, unpublished work, Stockholm (1999).
K.-G. Chin, H.-J. Lee, J.-H. Kwak, J.-Y. Kang, and B.-J. Lee, J. Alloy. Compd. 505, 217 (2010).
H. Baker and H. Okamoto, ASM Handbook-Alloy Phase Diagrams, 3 rd ed., pp.635-1243, ASM International, USA (1992).
G. A. Salishchev, M. A. Tikhonovsky, D. G. Shaysultanov, N. D. Stepanov, A. V. Kuznetsov, I. V. Kolodiy, et al. J. Alloy. Compd. 591, 11 (2014).
O. N. Senkov, J. D. Miller, D. B. Miracle, and C. Woodward, Nat. Commun. 6, 6529 (2015).
O. N. Senkov, J. D. Miller, D. B. Miracle, and C. Woodward, CALPHAD 50, 32 (2015).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Choi, WM., Jung, S., Jo, Y.H. et al. Design of new face-centered cubic high entropy alloys by thermodynamic calculation. Met. Mater. Int. 23, 839–847 (2017). https://doi.org/10.1007/s12540-017-6701-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-017-6701-1