Abstract
A new synthetic strategy has been developed to encapsulate supported Pt nanoparticles in heterogeneous catalysts to prevent their sintering. Model catalysts were first prepared by dispersing ∼3-nm Pt nanoparticles on ∼120-nm silica beads. These were then covered with a fresh layer of mesoporous silica, a few tens of nanometers thick, and etched to re-expose the metal surface to the reaction mixtures. TEM images were used to confirm the success of each of the synthesis steps, and both CO titrations and kinetic measurements for the catalytic conversion of cis- and trans-2-butenes with hydrogen were employed to test the degree of re-activation of the catalyst obtained after the etching treatment, which had to be tuned to give simultaneous maximum activity and maximum catalyst stability. The resulting encapsulated platinum nanoparticles were shown to resist sintering during calcination at temperatures as high as 1075 K, whereas the unprotected catalysts were seen to sinter by 875 K.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Thomas, J. M.; Thomas, W. J. Introduction to the Principles of Heterogeneous Catalysis; Academic Press: London, 1967.
Pinna, F. Supported metal catalysts preparation. Catal. Today 1998, 41, 129–137.
Ma, Z.; Zaera, F. Heterogeneous catalysis by metals. In Encyclopedia of Inorganic Chemistry, 2nd ed.; King, R. B., Ed.; John Wiley & Sons: New York, 2005; pp. 1768–1784.
Bond, G. C. Metal-Catalysed Reactions of Hydrocarbons; Springer: New York, 2005.
Ma, Z.; Zaera, F. Characterization of heterogeneous catalysts. In Surface and Nanomolecular Catalysis; Richards, R., Ed.; CRC Taylor & Francis: Boca Raton, 2006; pp. 1–37.
Somorjai, G. A.; Frei, H.; Park, J. Y. Advancing the frontiers in nanocatalysis, biointerfaces, and renewable energy conversion by innovations of surface techniques. J. Am. Chem. Soc. 2009, 131, 16589–16605.
Zaera, F. The new materials science of catalysis: Toward controlling selectivity by designing the structure of the active site. J. Phys. Chem. Lett. 2010, 1, 621–627.
Zaera, F. Regio, stereo, and enantio selectivity in hydrocarbon conversion on metal surfaces. Acc. Chem. Res. 2009, 42, 1152–1160.
Shiju, N. R.; Guliants, V. V. Recent developments in catalysis using nanostructured materials. Appl. Catal. A 2009, 356, 1–17.
Lee, I.; Delbecq, F.; Morales, R.; Albiter, M. A.; Zaera, F. Tuning selectivity in catalysis by controlling particle shape. Nat. Mater. 2009, 8, 132–138.
Bartholomew, C. H. Mechanisms of catalyst deactivation. Appl. Catal. A 2001, 212, 17–60.
Datye, A. K.; Xu, Q.; Kharas, K. C.; McCarty, J. M. Particle size distributions in heterogeneous catalysts: What do they tell us about the sintering mechanism? Catal. Today 2006, 111, 59–67.
Molenbroek, A.; Helveg, S.; Topsøe, H.; Clausen, B. Nanoparticles in heterogeneous catalysis. Top. Catal. 2009, 52, 1303–1311.
Zhang, Q.; Ge, J.; Pham, T.; Goebl, J.; Hu, Y.; Lu, Z.; Yin, Y. Reconstruction of Ag nanoplates by UV irradiation: Tailored optical properties and enhanced stability. Angew. Chem. Int. Ed. 2009, 48, 3516–3519.
Joo, S. H.; Park, J. Y.; Tsung, C. -K.; Yamada, Y.; Yang, P.; Somorjai, G. A. Thermally stable Pt/mesoporous silica core-shell nanocatalysts for high-temperature reactions. Nat. Mater. 2009, 8, 126–131.
Gude, K.; Narayanan, R. Synthesis and characterization of colloidal-supported metal nanoparticles as potential intermediate nanocatalysts. J. Phys. Chem. C 2010, 114, 6356–6362.
Zhang, Q.; Lee, I.; Ge, J.; Zaera, F.; Yin, Y. Surface-protected etching of mesoporous oxide shells for stabilization of metal nanocatalysts. Adv. Funct. Mater. 2010, 20, 2201–2214.
Zhang, Q.; Zhang, T.; Ge, J.; Yin, Y. Permeable silica shell through surface-protected etching. Nano Lett. 2008, 8, 2867–2871.
Ge, J.; Zhang, Q.; Zhang, T.; Yin, Y. Core-satellite nano-composite catalysts protected by a porous silica shell: Controllable reactivity, high stability, and magnetic recyclability. Angew. Chem. Int. Ed. 2008, 47, 8924–8928.
Zaera, F. Infrared and molecular beam studies of chemical reactions on solid surfaces. Int. Rev. Phys. Chem. 2002, 21, 433–471.
Tiznado, H.; Fuentes, S.; Zaera, F. Infrared study of CO adsorbed on Pd/Al2O3-ZrO2. Effect of zirconia added by impregnation. Langmuir 2004, 20, 10490–10497.
Loaiza, A.; Xu, M.; Zaera, F. On the mechanism of the H-D exchange reaction in ethane over platinum catalysts. J. Catal. 1996, 159, 127–139.
Aryafar, M.; Zaera, F. Kinetic study of the catalytic oxidation of alkanes over nickel, palladium, and platinum foils. Catal. Lett. 1997, 48, 173–183.
Wilson, J.; Guo, H.; Morales, R.; Podgornov, E.; Lee, I.; Zaera, F. Kinetic measurements of hydrocarbon conversion reactions on model metal surfaces. Phys. Chem. Chem. Phys. 2007, 9, 3830–3852.
Heiz, U.; Sherwood, R.; Cox, D. M.; Kaldor, A.; Yates, J. T. CO chemisorption on monodispersed platinum clusters on SiO2: Detection of CO chemisorption on single platinum atoms. J. Phys. Chem. 1995, 99, 8730–8735.
Sheppard, N.; Nguyen, T. T. The vibrational spectra of carbon monoxide chemisorbed on the surface of metal catalysts—A suggested scheme of interpretation. In Advances in Infrared and Raman Spectroscopy; Clark, R. J. H., Hester, R. E., Eds.; Heyden: London, 1978; Vol. 5; pp. 67–148.
Lee, I.; Zaera, F. Catalytic conversion of olefins on supported cubic platinum nanoparticles: Selectivity of (100) versus (111) surfaces. J. Catal. 2010, 269, 359–366.
Albiter, M. A.; Zaera, F. Dendrimer-based synthesis of Pt catalysts for hydrocarbon conversion. Appl. Catal. A 2010, in press, doi:10.1016/j.apcata.2010.05.045.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, I., Zhang, Q., Ge, J. et al. Encapsulation of supported Pt nanoparticles with mesoporous silica for increased catalyst stability. Nano Res. 4, 115–123 (2011). https://doi.org/10.1007/s12274-010-0059-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12274-010-0059-8