Abstract
Thermal simulation is an interesting method to reproduce different regions of the heat-affected zone (HAZ) in specimens with dimensions proper to perform microstructural investigations, corrosion resistance and mechanical tests. In this work, different regions of the HAZ of duplex UNS S32205 and superduplex UNS S32750 stainless steels were reproduced using a Gleeble machine. For each material, thermal cycles with peak temperatures of 800, 1000, 1200 and 1350 °C were reproduced in order to evaluate the microstructure, pitting resistance, hardness and microhardness of the phases. It was found that the critical pitting temperature (CPT) was reduced in specimens processed with a peak temperature of 1350 °C in comparison with the base metals, while with peak temperatures of 800 and 1000 °C there was an increase in the CPT. Secondary austenite precipitation was identified in specimens with peak temperatures 800 and 1000 °C, but this phase did not impar the pitting resistance. Intense chromium nitrides precipitation and increase in the ferrite phase content were the main microstructural changes observed with peak temperature 1350 °C. The duplex steel undergone higher ferritization than the superduplex. The CPT was reduced with the chromium nitride precipitation, but the microhardness of the ferrite was not affected by these particles.
Similar content being viewed by others
References
J.-O. Nilsson, Super Duplex Stainless Steels, Mater. Sci. Technol., 1992, 8(8), p 685–700.
IMOA, in Practical Guidelines for the Fabrication of Duplex Stainless Steels, 2nd edn. (International Molybdenum Association (IMOA), 2009).
R.N. Gunn, Duplex Stainless Steels: Microstructure, Properties and Applications, 1st ed. Abington Publishing, 1997.
Yt. Shin, Hs. Shin and Hw. Lee, Effects of Heat Input on Pitting Corrosion in Super Duplex Stainless Steel Weld Metals, Met. Mater. Int., 2012, 18(6), p 1037–1040.
A. Corolleur, A. Fanica and G. Passot, Ferrite Content in the Heat Affected Zone of Duplex Stainless Steels, Berg Huettenmaenn Monatsh, 2015, 160(9), p 413–418.
API, API RP 582-2009. Welding Guidelines for the Chemical, Oil, and Gas Industries (American Petroleum Institute, 2009).
API, API TR 938-C-2015. Use of Duplex Stainless Steels in the Oil Refining Industry (American Petroleum Institute, 2015).
NORSOK, M-630 Material Data Sheets and Element Data Sheets for Piping (Standards Norway, 2013).
G.R. Hitchcock, W.F. Deans, D.S. Thompson and A. Coats, Pin-Hole and Crack Formation in a Duplex Stainless Steel Downhole Tool, Eng. Fail. Anal., 2001, 8(3), p 213–226.
J. Smiderle, J.M. Pardal, S.S.M. Tavares and A.C.N. Vidal, Premature Failure of Superduplex Stainless Steel Pipe by Pitting in Sea Water Environment, Eng. Fail. Anal., 2014, 46, p 134–139.
V.M. Linton, N.J. Laycock, S.J. Thomsen and A. Klumpers, Failure of a Super Duplex Stainless Steel Reaction Vessel, Eng. Fail. Anal., 2004, 11(2), p 243–256.
L. Li, Z. Du, X. Sheng, M. Zhao, L. Song, B. Han and X. Li, Comparative Analysis of GTAW+SMAW and GTAW Welded Joints of Duplex Stainless Steel 2205 Pipe, Int. J. Press. Vessels Pip., 2022, 199, p 104748.
H.B. Pereira, T.H.C. Pimentel, C.A. da Silva, Z. Panossian and C.R.F. de Azevedo, Influence of Welding Energy on Intergranular and Pitting Corrosion Susceptibility of UNS S32205 Duplex Stainless-Steel Joints, Mat. Res., 2022, 25(suppl 1), p e20210488.
S.S.M. Tavares, J.M. Pardal, L.D. Lima, I.N. Bastos, A.M. Nascimento and J.A. de Souza, Characterization of Microstructure, Chemical Composition, Corrosion Resistance and Toughness of a Multipass Weld Joint of Superduplex Stainless Steel UNS S32750, Mater. Charact., 2007, 58(7), p 610–616.
M.C. Young, S.L.I. Chan, L.W. Tsay and C.-S. Shin, Hydrogen-Enhanced Cracking of 2205 Duplex Stainless Steel Welds, Mater. Chem. Phys., 2005, 91(1), p 21–27.
S.S.M. Tavares, C. Scandian, J.M. Pardal, T.S. Luz and F.J. da Silva, Failure Analysis of Duplex Stainless Steel Weld Used in Flexible Pipes in off Shore Oil Production, Eng. Fail. Anal., 2010, 17(6), p 1500–1506.
S.S.M. Tavares, J.M. Pardal, L.F. Noris and M.G. Diniz, Microstructural Characterization and Non-destructive Testing and of Welded Joints of Duplex Stainless Steel in Flexible Pipes, J. Mater. Res. Technol., 2021, 15, p 3399–3408.
L. Pezzato, M. Lago, K. Brunelli, M. Breda and I. Calliari, Effect of the Heat Treatment on the Corrosion Resistance of Duplex Stainless Steels, J. Mater. Eng. Perform., 2018, 27(8), p 3859–3868.
M. Knyazeva and M. Pohl, Duplex Steels. Part II: Carbides and Nitrides, Metallogr. Microstruct. Anal., 2013, 2(5), p 343–351.
N. Pettersson, R.F.A. Pettersson and S. Wessman, Precipitation of Chromium Nitrides in the Super Duplex Stainless Steel 2507, Metall. Mater. Trans. A, 2015, 46(3), p 1062–1072.
C. Gennari, M. Lago, B. Bögre, I. Meszaros, I. Calliari and L. Pezzato, Microstructural and Corrosion Properties of Cold Rolled Laser Welded UNS S32750 Duplex Stainless Steel, Metals, 2018, 8(12), p 1074.
E.V. Morales, J.A. Pozo, L. Olaya, E. Kassab, J.A.C. Ponciano, K. Ghavami and I.S. Bott, Remarks on the Evolution and Performance of the Different Austenite Morphologies at the Simulated HAZs of a 2205 Duplex Stainless Steel, J. Mater. Res. Technol., 2019, 8(5), p 3936–3949.
R.-I. Hsieh, H.-Y. Liou and Y.-T. Pan, Effects of Cooling Time and Alloying Elements on the Microstructure of the Gleeble-Simulated Heat-Affected Zone of 22% Cr Duplex Stainless Steels, J. Mater. Eng. Perform., 2001, 10(5), p 526–536.
ASTM, A790/A790M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel (ASTM International, 2020).
N.N. Rykalin, in Calculation of Heat Processes in Welding (Moscow, 1960).
ASTM, G150-Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels (ASTM International, 2018) https://doi.org/10.1520/G0150-18
J.N. Conceição, E.O. Correa, A.C. Gonzaga, J.M. Pardal and S.S.M. Tavares, Mechanical Properties of UNS S39274 Superduplex Stainless Steel Work Hardened and Solution Annealed, Mater. Res., 2022, 25, p e20220108.
J.C. Lippold and D.J. Kotecki, Welding Metallurgy and Weldability of Stainless Steels, John Wiley and Sons, 2005.
S.M. Kim, J.S. Kim, K.T. Kim, K.-T. Park and C.S. Lee, Effect of Ce Addition on Secondary Phase Transformation and Mechanical Properties of 27Cr-7Ni Hyper Duplex Stainless Steels, Mater. Sci. Eng. A, 2013, 573, p 27–36.
S.-H. Jeon, S.-T. Kim, I.-S. Lee, J.-S. Kim, K.-T. Kim and Y.-S. Park, Effects of W Substitution on the Precipitation of Secondary Phases and the Associated Pitting Corrosion in Hyper Duplex Stainless Steels, J. Alloy. Compd., 2012, 544, p 166–172.
S. Hereñú, M.G. Moscato, I. Alvarez and A.F. Armas, The Influence of Chromium Nitrides Precipitation on the Fatigue Behavior of Duplex Stainless Steels, Procedia Eng., 2014, 74, p 179–182.
W. Horvath, B. Tabernig, E. Werner and P. Uggowitzer, Microstructures and Yield Strength of Nitrogen Alloyed Super Duplex Steels, Acta Mater., 1997, 45(4), p 1645–1654.
S.S.M. Tavares, A. Loureiro, J.M. Pardal, T.R. Montenegro and V.C. da Costa, Influence of Heat Treatments at 475 and 400 °C on the Pitting Corrosion Resistance and Sensitization of UNS S32750 and UNS S32760 Superduplex Stainless Steels, Mater. Corros., 2011 https://doi.org/10.1002/maco.201006016
Acknowledgments
Authors acknowledge to Brazilian research agencies FAPERJ and CNPq (Grant Number 314314/2018-0) for financial support.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Pecly, P.H.R., Almeida, B.B., Perez, G. et al. Microstructure, Corrosion Resistance, and Hardness of Simulated Heat-Affected Zone of Duplex UNS S32205 and Superduplex UNS S32750 Stainless Steels. J. of Materi Eng and Perform 32, 9019–9028 (2023). https://doi.org/10.1007/s11665-022-07784-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-022-07784-3