Abstract
In this paper, the effect of Mg content on the microstructure and properties of Al-Cu-Mn alloy was investigated. The microstructures and the mechanical properties of the alloys were studied by scanning electron microscopy and transmission electron microscopy, and Vickers hardness measurement, respectively. Furthermore, the effect of Mg content on the corrosion resistance of the alloys was explored by exfoliation corrosion test, intergranular corrosion test, and electrochemical techniques. The results show that the overall properties of Al-Cu-Mn alloy with 0.1 wt.% Mg are superior to other alloys. Specifically, the Vickers hardness of this alloy reaches 111.45 HV. The grating of exfoliation corrosion is EA, and the intergranular corrosion depth is 30.2 μm. It is believed that the improved mechanical properties and corrosion resistance of the Al-Cu-Mn alloy with 0.1 wt.% Mg result from the S phase formed in the alloy and the highly dispersive distribution of the θ phase.
Similar content being viewed by others
References
V.R. Skalskii and I.M. Lyasota, Features of Acoustic-Emission Signals During the Initiation of a Fatigue Failure in a Welded Joint of an Aluminum Alloy of the Al-Cu-Mn System, Russ. J. Nondestr. Test., 2014, 50(2), p 120–126
Y.Z. Chen, W. Liu, and S.J. Yuan, Strength and Formability Improvement of Al-Cu-Mn Aluminum Alloy Complex Parts by Thermomechanical Treatment with Sheet Hydroforming, J. Mater., 2015, 67(5), p 938–947
B. Grushko and S.B. Mi, Al-rich Region of Al-Cu-Mn, J. Alloys Compd., 2016, 688(B), p 957–963
X.W. Yang, J.C. Zhu, and Z.S. Nong, Constitutive Behavior of As-Quenched Al-Cu-Mn Alloy, Mod. Phys. Lett. B, 2013, 27(19), p 1341036
Z. Chen, P. Chen, and C. Ma, Microstructures and Mechanical Properties of Al-Cu-Mn Alloy with La and Sm Addition, Rare Met., 2012, 31(4), p 332–335
F.S. Meng and Z. Wang, Microstructures and Properties Evolution of Al-Cu-Mn Alloy with Addition of Vanadium, Metals, 2017, 1(7), p 109–113
A.S. Prosviryakov, K.D. Shcherbachev, and N.Y. Tabachkova, Microstructural Characterization of Mechanically Alloyed Al-Cu-Mn Alloy with Zirconium, Mater. Sci. Eng. A, 2015, 623, p 109–113
T. Kozmel, M. Vural, and S. Tin, EBSD Analysis of High Strain Rate Application Al-Cu Based Alloys, Mater. Sci. Eng. A, 2015, 630, p 99–106
M. Yin and Y. Du, Diffusivities and Atomic Mobilities in Cu-Rich fcc Al-Cu-Mn Alloy, Int. J. Mater. Res., 2012, 103(7), p 807–813
G. Ozer and A. Karaaslan, Relationship of RRA Heat Treatment with Exfoliation Corrosion, Electrical Conductivity and Microstructure of AA7075 Alloy, Mater. Corros., 2017, 68(11), p 1260–1267
G. Ozer and A. Karaaslan, The Effect of RRA Heat Treatment on the Intergranular Corrosion of the AA7075 Alloy, Pract. Metallogr, 2017, 54(4), p 256–266
G. Ozer and A. Karaaslan, Properties of AA7075 Aluminum Alloy in Aging and Retrogression and Reaging Process, Trans. Nonferrous Met. Soc. China, 2017, 27(11), p 2357–2362
A. Abolfazl, K.T. Ali, and K.T. Kourosh, Recent Advances in Ageing of 7xxx Series Aluminum Alloy: A Physical Metallurgy Perspective, J. Alloys Compd., 2019, 781, p 945–983
Y. Li, Z. Liu, and S. Bai, Effects of Pre-strain on Exfoliation Corrosion Behavior in Al-Cu-Mg Alloy, J. Mater. Eng. Perform., 2012, 21(7), p 1479–1484
Y.C. Lin, G. Liu, and M.S. Chen, Corrosion Resistance of A Two-Stage Stress-Aged Al-Cu-Mg Alloy: Effects of External Stress, J. Alloys Compd., 2016, 661, p 221–230
X.Y. Liu, M.J. Li, and F. Gao, Effects of Aging Treatment on the Intergranular Corrosion Behavior of Al-Cu-Mg-Ag Alloy, J. Alloys Compd., 2015, 639, p 263–267
K.S. Ghosh, S. Mukhopadhyay, and B. Konar, Study of Aging and Electrochemical Behaviour of AlLiCuMg Alloys, Mater. Corros., 2014, 64(10), p 890–901
P.K. Rout, M.M. Ghosh, and K.S. Ghosh, Effect of Solution pH on Electrochemical and Stress Corrosion Cracking Behaviour of a 7150 Al-Zn-Mg-Cu Alloy, Mater. Sci. Eng. A, 2014, 604(1), p 156–165
S. Chen, K. Chen, and G. Peng, Effect of Heat Treatment on Strength, Exfoliation Corrosion and Electrochemical Behavior of 7085 Aluminum Alloy, Mater. Des., 2012, 35, p 93–98
P.V. Nygaard and M.R. Geiker, Measuring the Corrosion Rate of Steel in Concrete—Effect of Measurement Technique, Polarisation Time and Current, Mater. Corros., 2015, 63(3), p 200–214
H. Chen, T. Yu, and Z. Qi, Effect of Minor Er on the Microstructure and Properties of Al-6.0Mg-0.4Mn-0.1Cr-0.1Zr Alloys, J. Mater. Eng. Perform., 2018, 27(11), p 5709–5717
R.R. Chen, G. Qin, H.T. Zheng, L. Wang, Y.Q. Su, Y.L. Chiu, H.S. Ding, J.J. Guo, and H.Z. Fu, Composition Design of High Entropy Alloys Using the Valence Electron Concentration to Balance Strength and Ductility, Acta Mater., 2018, 144, p 129–137
G. Qin, R.R. Chen, K.L. Peter, Y.F. Gao, X.Q. Li, H.T. Zheng, L. Wang, Y. Su, J.J. Guo, and H.Z. Fu, A Novel Face-Centered-Cubic High-Entropy Alloy Strengthened by Nanoscale Precipitates, Scr. Mater., 2019, 172, p 51–55
Acknowledgments
This research was financially supported by the Program for National Key Research and Development Plan (2017YFB1104000), National Natural Science Foundation of China (51574167) and Doctoral Scientific Research Foundation of Liaoning Province (20170520337).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Su, R., Wang, K., Yang, Y. et al. Effect of Mg Content on the Microstructure and Corrosion Properties of Al-Cu-Mn Alloy. J. of Materi Eng and Perform 29, 1622–1629 (2020). https://doi.org/10.1007/s11665-020-04684-2
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-020-04684-2