Abstract
The effect of single addition of La or Sm on the microstructures and mechanical properties of an Al-Cu-Mn alloy were investigated by microstructure characterization and tensile test. The results show that addition of La or Sm into the Al-Cu-Mn alloy can remarkably increase the density of θ′ phase and refine the microstructure, and thus, improves the mechanical properties at room temperature. La addition results in a more considerable increase in the density and refinement of θ′ phase than Sm addition. La addition has a more significant contribution on the mechanical properties of the Al-Cu-Mn alloy than Sm addition. In addition, a new phase of Al6Cu6La is formed in the Al-Cu-Mn alloy with La addition.
Similar content being viewed by others
References
Sha G., Marceau R.K.W., Gao X., Muddle B.C., and Ringer S.P., Nanostructure of aluminium alloy 2024: segregation, clustering and precipitation processes, Acta Mater., 2011, 59(4): 1659.
Yao D.M., Zhao W.G., Zhao H.L., Qiu F., and Jiang Q.C., High creep resistance behavior of the casting Al-Cu alloy modified by La, Scr. Mater., 2009, 61(12): 1153.
Liu X.Y., Pan Q.L., Lu C.G., He Y.B., Li W.B., and Liang W.J., Microstructure and mechanical properties of Al-Cu-Mg-Mn-Zr alloy with trace amounts of Ag, Mater. Sci. Eng., 2009, A 525(1–2): 128.
Wang X., Chen G.Q., Li B., Wu L.M., Jiang D.M., Effects of Sc, Zr and Ti on the microstructure and properties of Al alloys with high Mg content, Rare Met., 2010, 29(1): 66.
Xiao D.H., Wang J.N., Ding D.Y., and Yang H.L., Effect of rare earth Ce addition on the microstructure and mechanical properties of an Al-Cu-Mg-Ag alloy, J. Alloys Compd., 2003, 352(1–2): 84.
Barlat F., and Liu J., Precipitate-induced anisotropy in binary Al-Cu alloys, Mater. Sci. Eng., 1998, A 257(1): 47.
Zhao H.L., Yao D.M., Qiu F., Xia Y.M., Jiang Q.C., High strength and good ductility of casting Al-Cu alloy modified by PrxOy and LaxOy, J. Alloys Compd., 2011, 509(5): L43.
Song M., Chen K.H., Huang L.P., Effects of Ce and Ti on the microstructures and mechanical properties of an Al-Cu-Mg-Ag alloy, Rare Met., 2007, 26(1): 28.
Wang W.T., Zhang X.M., Gao Z.G., Jia Y.Z., Ye L.Y., Zheng D.W., and Liu L., Influences of Ce addition on the microstructures and mechanical properties of 2519A aluminum alloy plate, J. Alloys Compd., 2010, 491(1–2): 366.
Xiao D.H., and Huang B.Y., Effect of Yb addition on precipitation and microstructure of Al-Cu-Mg-Ag alloys, Trans. Nonferrous Met. Soc. China, 2007, 17(6): 1181.
Fang H.C., Chen K.H., Zhang Z., and Zhu C.J., Effect of Yb additions on microstructures and properties of 7A60 aluminum alloy, Trans. Nonferrous Met. Soc. China, 2008, 18(1): 28.
Zhang X.M., Wang W.T., Chen M.G., Gao Z.G., Jia Y.Z., Ye L.Y., Zhang D.W., Liu L., and Kuang X.Y., Effects of Yb addition on microstructures and mechanical properties of 2519A aluminum alloy plate, Trans. Nonferrous Met. Soc. China, 2010, 20(5): 727.
Li H.Z., Liang X.P., Li F.F., Guo F.F., Li Z., and Zhang X.M., Effect of Y on microstructure and mechanical properties of 2519 aluminum alloy, Trans. Nonferrous Met. Soc. China, 2007, 17(6): 1191.
Bai S., Liu Z.Y., Li Y.T., Hou Y.H., and Chen X., Microstructures and fatigue fracture behavior of an Al-Cu-Mg-Ag alloy with addition of rare earth Er, Mater. Sci. Eng., 2010, A527(7–8): 1806.
Song M., Xiao D.H., and Zhang F.Q., Effect of Ce on the thermal stability of the Ω phase in an Al-Cu-Mg-Ag alloy, Rare Met., 2009, 28(2): 156.
Villars P., and Calvert L.D., Pearson’s Handbook of Crystallographic Data for intermetallic Phases, second ed., ASM International, Ohio, 1996: 765.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, Z., Chen, P. & Ma, C. Microstructures and mechanical properties of Al-Cu-Mn alloy with La and Sm addition. Rare Metals 31, 332–335 (2012). https://doi.org/10.1007/s12598-012-0515-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12598-012-0515-6