Tests are carried out for implementing new unfired technology applied to manufacturing quartz steel-pouring refractories, rolls for furnaces annealing dynamo steel and vibration molding ceramic concrete blocks. Protection tubes prepared by this technology for steel pouring successfully pass plant tests with pouring steels both with a standard and increased manganese content. Their life is comparable with similar objects prepared by firing technology.
Similar content being viewed by others
References
Yu. E. Pivinskii,, P. V. Dyakin, and A. Yu Kolobov, “Research in the area of preparing materials based on fuzed quartz HCBS. Part 8. Effect of alkali additions on ceramic sintering and cristobalitization in a nonisothermal heating regime,” Novye Ogneupory, No. 1, 22 – 28 (2016).
Yu. E. Pivinskii,, P. V. Dyakin, and A. Yu Kolobov, “Research in the area of preparing materials based on fuzed quartz HCBS. Part 9. Effect of alkali additions on cristobalitization and thermal expansion after nonisothermal heating,” Novye Ogneupory, No. 3, 123 – 128 (2016).
Yu. E. Pivinskii,, P. V. Dyakin, and A. Yu Kolobov, “Research in the area of preparing materials based on fuzed quartz HCBS. Part 10. Some properties of cristobalite-containing materials,” Novye Ogneupory, No. 5, 27 – 33 (2016).
Yu. E. Pivinskii, and E. I. Suzdal’tsev, Quartz Ceramic and Refractories. In 2 Vol. Vol. 1, Materials, Their properties and Fields of Application [in Russian], Teploenergetik, Moscow (2008).
Yu. E. Pivinskii, and E. I. Suzdal’tsev, Quartz Ceramic and Refractories. In 2 Vol. Vol. 2. Theroetical Bases and Production Processes [in Russian], Teploenergetik, Moscow (2008).
Yu. E. Pivinskii, “Fundamentals of technology of ceramoconcrete,” Refractories, 19(1), 102 – 111 (1978).
Yu. E. Pivinskii,, V. A. Bevz, A. S. Shatalin, et al., USSR Inventor’s Cert 688482. Method for producing quartz refractories, Claim 04.25.78, Publ. 09.30.79, Byul. No. 36.
V. A. Bevz and Yu. E. Pivinskii, USSR Inventor’s Cert. 804607. Method for preparing quartz ceramic, Claim 04.04.79, Publ. 02.15.81, Byul. No. 6.
Yu. E. Pivinskii, V. A. Bevz, and R. Y. Popil’skii, “Production of unfired ceramic materials by strengthening with chemical activation of the contact bonds,” Refractories, 22(3), 234 – 241 (1981).
Yu. E. Pivinskii, Unmolded Refractories. Vol. 1. General Questions of Technology [in Russian], Teploenergetik, Moscow “003).
Yu. E. Pivinskii, Rheology of Dispersed Systems, HCBS and Ceramic Concretes. Elements of Nanotechno logy in Silicate Materials Science [in Russian], Politekhnika, St. Petersburg (2012).
Yu. E. Pivinskii, F. S. Kaplan, S. G. Semikova, et al., “Unfired quartz nozzles for teeming of steel,” Refractories, 30(1), 39 – 43 (1989).
Yu. E. Pivinskii, T. I. Litovskaya, O. N. Samarina, and F. S. Kaplan, “Development, introduction into production, and service of unfired quartz refractories,” Refractories, 30(9/10), 572 – 578 (1989).
Yu. E. Pivinskii, Ceramic Materials, Vol. II [in Russian], Stroiizdat, St. Petersburg (2003).
Yu. E. Pivinskii, “Thinning, plastifying and strengthening additions as effective modifiers in HCBS and ceramic concrete technology,” Refract. Indust. Ceram., 56(1), 12 – 18 (2012).
V. Petrov, House of Sand [in Russian], Lipetskaya Gazeta, 05.06.2012. C. 1, 2. http://www.Lpgzt.ru/article/23630.Html.
I. D. Kashcheev, Properties and Use of Refractories [in Russian], Teplotekhnik, Moscow (2004).
Yu. E. Pivinskii, “Vibrational molding of ceramic concretes. Molding systems and the regularities of the process, Refract. Indust. Ceram., 34(5), 313 – 322 (1993).
Yu. E. Pivinskii, “Research in the area of preparing materials based on fuzed quartz HCBS. Part 3. Study and improvement of centrifugal casting,” Refract. Indust. Ceram., 56(2), 126 – 135 (2015).
Yu. E. Pivinskii, A. M. Gorokhovskii, and A. V. Makarov, “Record-breaking durability of quartz protecting tubes for steel teeming tested under service conditions,” Refract. Indust. Ceram., 46(1), 27 – 28 (2005).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 7, pp. 48 – 53, July 2016.
1Part 1 of the article was published in Novye Ogneupory No. 7 (2014), parts 2 – 7 in Nos. 1, 3, 4, 6, 7, and 9 (2015), and parts 8—10 in Nos. 1, 3 and 5 (2016).
Rights and permissions
About this article
Cite this article
Pivinskii, Y.E., Dyakin, P.V., Buravov, A.D. et al. Research in the Area of Preparing Materials Based on Fuzed Quartz HCBS. Part 11. Tests for Implementing New Unfired Quartz Refractory Technology1 . Refract Ind Ceram 57, 373–377 (2016). https://doi.org/10.1007/s11148-016-9987-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-016-9987-5