Abstract
The materials in oxyfuel power plant will be subjected to CO2− and SO2−rich gases on the fireside. The oxidation behaviour of two 9–12 % Cr steels T92 and VM12 was studied under dry oxyfuel environment in the temperature range of 580–650 °C for up to 1,000 h. The oxide structure and morphology were analyzed using various experimental techniques. A complex temperature dependence of oxidation rate is observed for both T92 and VM12 whereby the oxidation rate decreased with increasing temperature. This is attributed to increased Cr-enrichment in the inner scale with increasing temperature. T92 and VM12 alloys are also susceptible to carburization in an oxyfuel environment.
Similar content being viewed by others
References
D. Huenert and A. Kranzmann, Corrosion Science 53, 2306 (2011).
D. Huenert, W. Schulz and A. Kranzmann, Power Plant Chemistry 12, 344 (2010).
N. Otsuka, Oxidation of Metals 80, 555 (2013).
D. Huenert, W. Schulz, and A. Kranzmann, Proceedings of International Conference on Properties of Water and Steam ‘ICPWS XV’, Berlin, September 8–11, 2008.
A. Kranzmann, T. Neddemeyer, A. S. Ruhl, D. Huenert, D. Bettge, G. Oder and R. Saliwan Neumann, International Journal of Greenhouse Gas Control 5S, S168 (2011).
D. Fleig, K. Andersson, F. Normann and F. Johnsson, Industrial and Engineering Chemistry Research 50, 8505 (2011).
R. Stanger and T. Wall, Progress in Energy and Combustion Science 37, 69 (2011).
W. Schulz, D. Huenert, H. Nitschke, R. Saliwan-Neumann, and A. Kranzmann, Paper No. 09264, NACE Corrosion 2009, Atlanta, GA, March 22–26, 2009.
G. H. Meier, K. Jung, N. Mu, N. M. Yanar, F. S. Petit, J. P. Abellan, T. Olszewski, L. N. Hierro, W. J. Quadakkers and G. R. Holcomb, Oxidation of Metals 74, 319 (2010).
D. Huenert and A. Kranzmann, Paper No. 08447, NACE Corrosion 2008, New Orleans, LA, March, 2008.
J. Zurek, E. Wessel, L. Niewolak, F. Schmitz, T.-U. Kern, L. Singheiser and W. J. Quadakkers, Corrosion Science 46, 2301 (2004).
L. Sanchez, M. P. Hierro and F. J. Perez, Oxidation of Metals 71, 173 (2009).
I. G. Wright and R. B. Dooley, International Materials Review 55, 129 (2010).
C. B. Alcock, M. G. Hocking and S. Zador, Corrosion Science 9, 111 (1969).
A. Rahmel, Corrosion Science 13, 125 (1973).
B. Haflan and P. Kofstad, Corrosion Science 23, 1333 (1983).
K. P. Lillerud, B. Haflan and P. Kofstad, Oxidation of Metals 21, 119 (1984).
A. Holt and P. Kofstad, Materials Science and Engineering A120, 101 (1989).
A. Jardnas, J.-E. Svensson and L.-G. Johansson, Oxidation of Metals 60, 427 (2003).
T. Jonsson, A. Jardnas, J.-E. Svensson, L.-G. Johansson and M. Halvarsson, Oxidation of Metals 67, 193 (2007).
A. Jardnas, J.-E. Svensson and L.-G. Johansson, Oxidation of Metals 69, 249 (2008).
D. J. Young, J. Zurek, L. Singheiser and W. J. Quadakkers, Corrosion Science 53, 2131 (2011).
P. J. Ennis and W. J. Quadakkers, International Journal of Pressure Vessels and Piping 84, 75 (2007).
J. Zurek, L. N. Hierro, J. P. Abellan, L. Niewolak, L. Singheiser and W. J. Quadakkers, Materials Science Forum 461–464, 791 (2004).
L. N. Hierro, V. Rohr, P. J. Ennis, M. Schutze and W. J. Quadakkers, Materials and Corrosion 56, 890 (2005).
A. S. Khanna, P. Rodriguez and J. B. Gnanamoorthy, Oxidation of Metals 26, 171 (1986).
J. G. Wolter, Oxidation of Metals 46, 129 (1996).
R. Y. Chen and W. Y. D. Yuen, Oxidation of Metals 59, 433 (2003).
J. G. Wolter, Oxidation of Metals 11, 81 (1977).
P. Singh and N. Birks, Werkstoffe and Korrosion 31, 682 (1980).
D. J. Young and S. Watson, Oxidation of Metals 44, 239 (1995).
F. Rouillard, G. Moine, M. Tabarant and J. C. Ruiz, Oxidation of Metals 77, 57 (2012).
W. J. Quadakkers, T. Olszewski, J. P. Abellan, V. Shemet and L. Singheiser, Materials Science Forum 696, 194 (2011).
P. Becker and D. J. Young, Oxidation of Metals 67, 267 (2007).
G. C. Wood and D. P. Whittle, Corrosion Science 7, 763 (1967).
M. G. C. Cox, B. McEnaney and V. D. Scott, Philosophical Magazine 31, 331 (1975).
M. Schutze, M. Schorr, D. P. Renusch, A. Donchev and J. P. T. Vossen, Materials Research 7, 111 (2004).
D. Laverde, T. G. Acebo and F. Castro, Corrosion Science 46, 613 (2004).
T. Gheno, D. Monceau, J. Zhang and D. J. Young, Corrosion Science 53, 2767 (2011).
A. Kranzmann, D. Huenert, H. Rooch, I. Urban, W. Schulz, and W. Oesterle, Paper No. 09265, NACE Corrosion 2009, Atlanta, GA, March 22–26, 2009.
D. Huenert, W. Schulz, H. Nitschke, R. Saliwan-Neumann, G. Oder, and A. Kranzmann, Paper No. 09263, NACE Corrosion 2009, Atlanta, GA, March 22–26, 2009.
J. P. Abellan, T. Olszewski, H. J. Penkalla, G. H. Meier, L. Singheiser and W. J. Quadakkers, Materials at High Temperatures 26, 63 (2009).
P. Pohjanne, S. Y. Olli, P. Auerkari, S. Tuurna, P. Jauhiainen, E. Turunen, T. Varis, K. Ruusuvuori, and M. Makipaa, NACE Corrosion 2010, Paper No. 10200, Houston, 2010.
C. T. Fujii and R. A. Meussner, Journal of the Electrochemical Society 114, 435 (1967).
Acknowledgments
K. Chandra would like to acknowledge Adolf Martens Foundation for his post-doctoral fellowship program under which this research was carried out. F. Rizzo thanks the support from CAPES, CNPq and FAPERJ. The authors also wish to thank Mr. Gobel Artur for his contribution in conducting the corrosion experiments.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chandra, K., Kranzmann, A., Saliwan Neumann, R. et al. High Temperature Oxidation Behavior of 9–12 % Cr Ferritic/Martensitic Steels in a Simulated Dry Oxyfuel Environment. Oxid Met 83, 291–316 (2015). https://doi.org/10.1007/s11085-014-9521-4
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11085-014-9521-4