The prospects of industrial application of the process of electron beam synthesis for fabricating powder and composite materials for the production of critical parts are proved experimentally. The new process is tested on titanium and titanium-molybdenum alloys and is shown to provide materials with homogeneous structure and high operating properties.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
G. A. Libenson, V. Yu. Lopatin, and G. V. Komarnitskii, Processes of Powder Metallurgy, Vol. 1. Production of Metallic Powders [in Russian], Izd. MISiS, Moscow (2001), 368 p.
G. A. Libenson, V. Yu. Lopatin, and G. V. Komarnitskii, Processes of Powder Metallurgy, Vol. 2. Forming and Sintering [in Russian], Izd. MISiS, Moscow (2002), 320 p.
M. I. Alymov, Powder Metallurgy of Nanocrystalline Materials [in Russian], Nauka, Moscow (2007), 169 p.
A. I. Rudskoy, S. Yu. Kondrat’ev, and V. N. Kokorin, “Pressing of heterophase moistened powder metallic mixtures for raising the quality of high-density billets using the method of intense compaction,” Inzh. Zh. Prilozh., No. 6, 12 – 16 (2011).
A. I. Rudskoy, V. N. Kokorin, S. Yu. Kondrat’ev, et al., “Pressing of heterophase moistened iron powders using the method of intense compaction,” Naukoemk. Tekhnol. Mashinostr., No. 5(23), 13 – 20 (2013).
A. I. Rudskoi, S. Y. Kondrat’ev, Y. A. Sokolov, and V. N. Kopaev, “Simulation of the layer-after-layer synthesis of articles with an electron beam,” Techn. Physics, 60(11), 1663 – 1669 (2015).
A. I. Rudskoy, S. Yu. Kondrat’ev, V. N. Kokorin, and N. A. Sizov, “A study of the process of densification under ultrasonic action on a moistened powder medium,” Nauch.-Tekh. Vedom. SPbGPU, No. 178, 148 – 155 (2013).
I. E. Murr, S. M. Gaytan, A. Ceylan, et al., “Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting,” Acta Mater., 58, 188 – 1894 (2010).
S. Biamino, A. U. Penna, U. Ackelid, et al., “Electron beam melting of Ti48Al2Cr2Nb alloy: Microstructure and mechanical properties investigation,” Intermetallics, No. 19, 776 – 781 (2011).
Yu. P. Moskvichev, V. I. Panin, S. V. Ageev, et al., “Granule composites and efficiency of their application,” Actual Conf., No. 1, 46 – 50 (2011).
A. I. Rudskoy, S. Yu. Kondrat’ev, and Yu. A. Sokolov, “Process of layer-after-layer electron-beam synthesis of powder articles in vacuum,” Zagot. Proizvod. Mashonostr., No. 8, 40 – 45 (2014).
A. I. Rudskoy, S. Yu. Kondrat’ev, Yu. A. Sokolov, and V. N. Kopaev, “Mathematical model of the process of production of metallic granules by the method of rotating electrode with plasma heating,” Zagot. Proizvod. Mashonostr., No. 4, 38 – 41 (2015).
S. Y. Kondrat’ev, V. I. Gorynin, and V. O. Popov, “Optimization of the parameters of the surface-hardened layer in laser quenching of components,” Welding Int., 26(8), 629 – 632 (2012).
S. Yu. Kondrat’ev and V. O. Popov, “Formation of wear-resistant quasi-nanostructured surface layer in steels and nonferrous alloys by laser treatment,” Uproch. Tekhn. Pokr., No. 2, 22 – 28(2011).
A. I. Rudskoy, S. Yu. Kondrat’ev, and Yu. A. Sokolov, “New approach to synthesis of powder and composite materials by electron beam. Part 1. Technological features of the process,” Metalloved. Term. Obrab. Met., No. 1, 30 – 35 (2016).
S. Yu. Kondrat’ev, Mechanical Properties of Metals [in Russian], SPbGPU, St. Petersburg (2011), 128 p.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 3, pp. 40 – 44, March, 2016.
Rights and permissions
About this article
Cite this article
Kondrat’ev, S.Y., Sokolov, Y.A. New Approach to Electron Beam Synthesis of Powder and Composite Materials. Part 2. Practical Results for Alloy VT6. Met Sci Heat Treat 58, 165–169 (2016). https://doi.org/10.1007/s11041-016-9982-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-016-9982-y