Abstract
It is thought that hydroxyl groups of plant fiber may react with isocyanate groups during the preparation of plant fiber-reinforced polyurethane composite, resulting in good interfacial bonding. In this work, jute fiber was reacted with polymethane polyphenyl isocyanate (pMDI) under different conditions, and the degree of reaction was evaluated using Fourier transform infrared spectroscopy and elemental analysis. The degree of reaction largely depended on the accessibility of the hydroxyl groups of the jute fibers and it increased with the reaction time and temperature. Thus, to obtain good interfacial bonding sufficient reaction time and a proper high temperature should be provided for the reaction of plant fiber with an isocyanate component in the preparation of plant fiber-reinforced polyurethane composites. The activity of catalyst also had a significant effect on the reaction of jute fiber with pMDI. The alkali-treated jute fiber presented clearly lower reactivity to pMDI than the raw fiber for the hydroxyl groups of the former fiber were less assessible. When pMDI reacted with the raw fiber, isocyanate groups primarily reacted with the hydroxyl groups of hemicellulose covering its surface, which might result in interfacial debonding between the hemicellulose molecules bonded to matrix and those adhered by van der Waals forces in raw fiber-reinforced polyurethane composite. When jute fiber reacted with pMDI at room temperature with no catalyst, the reaction rate was extremely low.
Similar content being viewed by others
References
Bakare IO, Okieimen FE, Pavithran C, Abdul Khalil HPS, Brahmakumar M (2010) Mechanical and thermal properties of sisal fiber-reinforced rubber seed oil-based polyurethane composites. Mater Des 31:4274–4280
Cao X, Dong H, Li CM (2007) New nanocomposite materials reinforced with flax cellulose nanocrystals in waterborne polyurethane. Biomacromol 8:899–904
Casado U, Marcovich NE, Aranguren MI, Mosiewicki MA (2009) High-strength composites based on tung oil polyurethane and wood flour: effect of the filler concentration on the mechanical properties. Polym Eng Sci 49:713–721
Ciecierska E, Jurczyk-Kowalska M, Bazarnik P, Gloc M, Kulesza M, Kowalski M, Krauze S, Lewandowska M (2016) Flammability, mechanical properties and structure of rigid polyurethane foams with different types of carbon reinforcing materials. Compos Struct 140:67–76
Corrales F, Vilaseca F, Llop M, Gironès J, Méndez JA, Mutjè P (2007) Chemical modification of jute fibers for the production of green-composites. J Hazard Mater 144:730–735
El-Shekeil YA, Sapuan SM, Khalina A, Zainudin ES, Al-Shuja’a OM (2012) Influence of chemical treatment on the tensile properties of kenaf fiber reinforced thermoplastic polyurethane composite. Express Polym Lett 6:1032–1040
Gu R, Sain MM, Konar SK (2013) A feasibility study of polyurethane composite foam with added hardwood pulp. Ind Crop Prod 42:273–279
Hakim AAA, Nassar M, Emam A, Sultan M (2011) Preparation and characterization of rigid polyurethane foam prepared from sugar-cane bagasse polyol. Mater Chem Phys 129:301–307
Huang G, Wang P (2017) Effect of preparation conditions on properties of rigid polyurethane foam composites based on liquefied bagasse and jute fiber. Polym Test 60:266–273
Joseph K, Thomas S (1996) Effect of chemical treatment on the tensile properties of short sisal fibre-reinforced polyethylene composites. Polymer 37:5139–5149
Kuranska M, Prociak A (2012) Porous polyurethane composites with natural fibres. Compos Sci Technol 72:299–304
Li X, Tabil LG, Panigrahi S (2007) Chemical treatments of natural fiber for use in natural fiber-reinforced composites: a review. J Polym Environ 15:25–33
Liu D, Song J, Anderson DP, Chang PR, Hua Y (2012) Bamboo fiber and its reinforced composites: structure and properties. Cellulose 19:1449–1480
Luo N, Wang DN, Ying SK (1997) Hydrogen-bonding properties of segmented polyether poly (urethane urea) copolymer. Macromolecules 30:4405–4409
Maafi EM, Tighzert L, Malek F (2010) Elaboration and characterization of composites of castor oil-based polyurethane and fibers from alfa stems. J Appl Polym Sci 118:902–909
Merlini C, Soldi V, Barra GMO (2011) Influence of fiber surface treatment and length on physico-chemical properties of short random banana fiber-reinforced castor oil polyurethane composites. Polym Test 30:833–840
Mosiewicki MA, Dell’Arciprete GA, Aranguren MI, Marcovich NE (2009) Polyurethane foams obtained from castor oil-based polyol and filled with wood flour. J Compos Mater 43:3057–3072
Nilsson H, Galland S, Larsson PT, Gamstedt EK, Iversen T (2012) Compression molded wood pulp biocomposites: a study of hemicellulose influence on cellulose supramolecular structure and material properties. Cellulose 19:751–760
Saha MC, Kabir ME, Jeelani S (2008) Enhancement in thermal and mechanical properties of polyurethane foam infused with nanoparticles. Mater Sci Eng A 479:213–222
Saha P, Manna S, Chowdhury SR, Sen R, Roy D, Adhikari B (2010) Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatment. Bioresour Technol 101:3182–3187
Silva MC, Takahashi JA, Chaussy D, Belgacem MN, Silva GG (2010) Composites of rigid polyurethane foam and cellulose fiber residue. J Appl Polym Sci 117:3665–3672
Sinha E, Rout SK (2008) Influence of fibre-surface treatment on structural, thermal and mechanical properties of jute. J Mater Sci 43:2590–2601
Wu Q, Henriksson M, Liu X, Berglund LA (2007) A high strength nanocomposite based on microcrystalline cellulose and polyurethane. Biomacromol 8:3687–3692
Zafeiropoulos NE, Williams DR, Baillie CA, Matthews FL (2002) Engineering and characterization of the interface in flax fibre/polypropylene composite materials. Part 1. Development and investigation of surface treatments. Compos Part A 33:1083–1093
Zhao Y, Yan N, Feng M (2012) Polyurethane foams derived from liquefied mountain pine beetle-infested barks. J Appl Polym Sci 123:2849–2859
Acknowledgments
The authors sincerely acknowledge the State Key Laboratory of Pulp and Paper Engineering for providing necessary facilities to execute this research work.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Huang, G., Chen, F. Reaction of jute fiber with isocyanate component for the production of plant fiber-reinforced polyurethane composites. Cellulose 26, 7297–7308 (2019). https://doi.org/10.1007/s10570-019-02612-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-019-02612-9