Abstract
In this study high quality cellulose fibrils, derived from rice straw by the chemical pretreatment, were fibrillated into cellulose micro/nanofibers through a subsequent homogenization and high-intensity ultrasonication processes. Properly comparing of the fibrillation yield and the morphological structure of the ensuing nanofibers, by means of scanning electron microscopy and transmission electron microscopy, revealed that the long and uniform cellulose nanofibers with desired diameters in the possible range of 6–20 nm and a high aspect ratio of about 177 are obtained when the output power and irradiation time of the conducted ultrasonication exceeded 500 W and 40 min, respectively. The accurate characterization of the chemical structure of the isolated cellulose nanofibers using X-ray diffraction and Fourier transform infrared spectroscopy revealed that lignin and hemicellulose were completely removed from the fibrils and crystallinity of the cellulose fibers increased approximately to 65%. As evidenced by thermogravimetric analysis, isolated cellulose nanofibers indicated good thermal stability. Due to the appropriated properties of ultralong isolated cellulose nanofibers, it is typically expected that they could potentially be utilized in various field such as green nanocomposites, filtration media, tissue engineering, and so on.
Graphical abstract
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Abdul Khalil HPS, Davoudpour Y, Islam MN, Mustapha A, Sudesh K, Dungani R, Jawaid M (2014) Production and modification of nanofibrillated cellulose using various mechanical processes: a review. Carbohydr Polym 99:649–665. https://doi.org/10.1016/j.carbpol.2013.08.069
Abe K, Yano H (2009) Comparison of the characteristics of cellulose microfibril aggregates of wood, rice straw and potato tuber. Cellulose 16:1017–1023. https://doi.org/10.1007/s10570-009-9334-9
Abe K, Iwamoto S, Yano H (2007) Obtaining cellulose nanofibers with a uniform width of 15 nm from wood. Biomacromolecules 8:3276–3278. https://doi.org/10.1021/bm700624p
Aimin T, Hongwei Z, Gang C, Guohui X, Wenzhi L (2005) Influence of ultrasound treatment on accessibility and regioselective oxidation reactivity of cellulose. Ultrason Sonochem 12:467–472. https://doi.org/10.1016/j.ultsonch.2004.07.003
Alemdar A, Sain M (2008a) Biocomposites from wheat straw nanofibers: morphology, thermal and mechanical properties. Compos Sci Technol 68:557–565. https://doi.org/10.1016/j.compscitech.2007.05.044
Alemdar A, Sain M (2008b) Isolation and characterization of nanofibers from agricultural residues: wheat straw and soy hulls. Bioresour Technol 99:1664–1671. https://doi.org/10.1016/j.biortech.2007.04.029
Berglund L, Noël M, Aitomäki Y, Öman T, Oksman K (2016) Production potential of cellulose nanofibers from industrial residues: efficiency and nanofiber characteristics Ind Crop. Prod 92:84–92. https://doi.org/10.1016/j.indcrop.2016.08.003
Besbes I, Vilar MR, Boufi S (2011) Nanofibrillated cellulose from ALFA, eucalyptus and pine fibres: preparation, characteristics and reinforcing potential. Carbohydr Polym 86:1198–1206. https://doi.org/10.1016/j.carbpol.2011.06.015
Bhatnagar A, Sain M (2005) Processing of cellulose nanofiber-reinforced composites. J Reinf Plast Comp 24:1259–1268. https://doi.org/10.1177/0731684405049864
Boufi S, Chaker A (2016) Easy production of cellulose nanofibrils from corn stalk by a conventional high speed blender. Ind Crop Prod 93:39–47. https://doi.org/10.1016/j.indcrop.2016.05.030
Brodeur PH, Gerhardstein JP (1998) Overview of applications of ultrasonics in the pulp and paper industry. In: Proceedings (Cat. No. 98CH36102) 1998 IEEE ultrasonics symposium vol 801, pp 809–815. https://doi.org/10.1109/ultsym.1998.762268
Chaker A, Alila S, Mutjé P, Vilar MR, Boufi S (2013) Key role of the hemicellulose content and the cell morphology on the nanofibrillation effectiveness of cellulose pulps. Cellulose 20:2863–2875. https://doi.org/10.1007/s10570-013-0036-y
Chandra J, George N, Narayanankutty SK (2016) Isolation and characterization of cellulose nanofibrils from arecanut husk fibre. Carbohydr Polym 142:158–166. https://doi.org/10.1016/j.carbpol.2016.01.015
Chen W, Yu H, Liu Y, Chen P, Zhang M, Hai Y (2011) Individualization of cellulose nanofibers from wood using high-intensity ultrasonication combined with chemical pretreatments. Carbohydr Polym 83:1804–1811. https://doi.org/10.1016/j.carbpol.2010.10.040
Chen P, Yu H, Liu Y, Chen W, Wang X, Ouyang M (2013) Concentration effects on the isolation and dynamic rheological behavior of cellulose nanofibers via ultrasonic processing. Cellulose 20:149–157. https://doi.org/10.1007/s10570-012-9829-7
Chen W et al (2014) Comparative study of aerogels obtained from differently prepared nanocellulose fibers. Chemsuschem 7:154–161. https://doi.org/10.1002/cssc.201300950
Cheng Q, Wang S, Rials TG, Lee S-H (2007) Physical and mechanical properties of polyvinyl alcohol and polypropylene composite materials reinforced with fibril aggregates isolated from regenerated cellulose fibers. Cellulose 14:593–602. https://doi.org/10.1007/s10570-007-9141-0
Cheng Q, Wang S, Harper DP (2009a) Effects of process and source on elastic modulus of single cellulose fibrils evaluated by atomic force microscopy. Compos Part A-Appl S 40:583–588. https://doi.org/10.1016/j.compositesa.2009.02.011
Cheng Q, Wang S, Rials TG (2009b) Poly(vinyl alcohol) nanocomposites reinforced with cellulose fibrils isolated by high intensity ultrasonication. Compos Part A-Appl S. 40:218–224. https://doi.org/10.1016/j.compositesa.2008.11.009
Cheng Q, Wang S, Han Q (2010) Novel process for isolating fibrils from cellulose fibers by high-intensity ultrasonication. II: fibril characterization. J Appl Polym Sci 115:2756–2762. https://doi.org/10.1002/app.30160
Cherian BM et al (2011) Cellulose nanocomposites with nanofibres isolated from pineapple leaf fibers for medical applications. Carbohydr Polym 86:1790–1798. https://doi.org/10.1016/j.carbpol.2011.07.009
Chirayil CJ, Joy J, Mathew L, Mozetic M, Koetz J, Thomas S (2014) Isolation and characterization of cellulose nanofibrils from Helicteres isora plant. Ind Crop Prod 59:27–34. https://doi.org/10.1016/j.indcrop.2014.04.020
Corrêa AC, de Morais Teixeira E, Pessan LA, Mattoso LHC (2010) Cellulose nanofibers from curaua fibers. Cellulose 17:1183–1192. https://doi.org/10.1007/s10570-010-9453-3
De Rosa IM, Kenny JM, Puglia D, Santulli C, Sarasini F (2010) Morphological, thermal and mechanical characterization of okra (Abelmoschus esculentus) fibres as potential reinforcement in polymer composites. Compos Sci Technol 70:116–122. https://doi.org/10.1016/j.compscitech.2009.09.013
Fatah I, Khalil H, Hossain M, Aziz A, Davoudpour Y, Dungani R, Bhat A (2014) Exploration of a chemo-mechanical technique for the isolation of nanofibrillated cellulosic fiber from oil palm empty fruit bunch as a reinforcing agent in composites materials. Polym Basel 6:2611. https://doi.org/10.3390/polym6102611
Ferrer A, Filpponen I, Rodríguez A, Laine J, Rojas OJ (2012) Valorization of residual Empty Palm Fruit Bunch Fibers (EPFBF) by microfluidization: production of nanofibrillated cellulose and EPFBF nanopaper. Bioresource Technol 125:249–255. https://doi.org/10.1016/j.biortech.2012.08.108
Garside P, Wyeth P (2003) Identification of cellulosic fibres by FTIR spectroscopy-thread and single fibre analysis by attenuated total reflectance. Stud Conserv 48:269–275. https://doi.org/10.1179/sic.2003.48.4.269
Grüneberger F, Künniger T, Zimmermann T, Arnold M (2014) Rheology of nanofibrillated cellulose/acrylate systems for coating applications. Cellulose 21:1313–1326. https://doi.org/10.1007/s10570-014-0248-9
Habibi Y, Lucia LA, Rojas OJ (2010) Cellulose nanocrystals: chemistry, self-assembly, and applications. Chem Rev 110:3479–3500. https://doi.org/10.1021/cr900339w
Hasanjanzadeh H, Hedjazi S, Ashori A, Mahdavi S, Yousefi H (2014) Effects of hemicellulose pre-extraction and cellulose nanofiber on the properties of rice straw pulp. Int J Biol Macromol 68:198–204. https://doi.org/10.1016/j.ijbiomac.2014.04.052
Hassan EA, Hassan ML (2016) Rice straw nanofibrillated cellulose films with antimicrobial properties via supramolecular route. Ind Crop Prod 93:142–151. https://doi.org/10.1016/j.indcrop.2016.02.025
Hassan ML, Mathew AP, Hassan EA, El-Wakil NA, Oksman K (2010) Nanofibers from bagasse and rice straw: process optimization and properties. Wood Sci Technol 46:193–205. https://doi.org/10.1007/s00226-010-0373-z
Hassan ML, Mathew AP, Hassan EA, El-Wakil NA, Oksman K (2012) Nanofibers from bagasse and rice straw: process optimization and properties. Wood Sci Technol 46:193–205. https://doi.org/10.1007/s00226-010-0373-z
Hayashi N, Kondo T, Ishihara M (2005) Enzymatically produced nano-ordered short elements containing cellulose I β crystalline domains. Carbohydr Polym 61:191–197. https://doi.org/10.1007/978-3-642-45232-1_58
Henriksson M, Henriksson G, Berglund L, Lindström T (2007) An environmentally friendly method for enzyme-assisted preparation of microfibrillated cellulose (MFC) nanofibers. Eur Polym J 43:3434–3441. https://doi.org/10.1016/j.eurpolymj.2007.05.038
Ho TTT, Abe K, Zimmermann T, Yano H (2014) Nanofibrillation of pulp fibers by twin-screw extrusion. Cellulose 22:421–433. https://doi.org/10.1007/s10570-014-0518-6
Isogai A, Saito T, Fukuzumi H (2011) TEMPO-oxidized cellulose nanofibers. Nanoscale 3:71–85. https://doi.org/10.1039/c0nr00583e
Iwamoto S, Nakagaito AN, Yano H, Nogi M (2005) Optically transparent composites reinforced with plant fiber-based nanofibers. Appl Phys A-Mater 81:1109–1112. https://doi.org/10.1007/s00339-005-3316-z
Iwamoto S, Nakagaito AN, Yano H (2007) Nano-fibrillation of pulp fibers for the processing of transparent nanocomposites. Appl Phys A 89:461–466. https://doi.org/10.1007/s00339-007-4175-6
Iwamoto S, Kai W, Isogai A, Iwata T (2009) Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy. Biomacromol 10:2571–2576. https://doi.org/10.1021/bm900520n
Jiang F, Hsieh Y-L (2013) Chemically and mechanically isolated nanocellulose and their self-assembled structures. Carbohydr Polym 95:32–40. https://doi.org/10.1016/j.carbpol.2013.02.022
Jiang F, Hsieh YL (2015) Holocellulose nanocrystals: amphiphilicity, oil/water emulsion, and self-assembly. Biomacromolecules. 16:1433–1441. https://doi.org/10.1021/acs.biomac.5b00240
Jiang F, Han S, Hsieh Y-L (2013) Controlled defibrillation of rice straw cellulose and self-assembly of cellulose nanofibrils into highly crystalline fibrous materials. RSC Adv 3:12366. https://doi.org/10.1039/c3ra41646a
Jiao Y, Wan C, Qiang T, Li J (2016) Synthesis of superhydrophobic ultralight aerogels from nanofibrillated cellulose isolated from natural reed for high-performance adsorbents. Appl Phys A. https://doi.org/10.1007/s00339-016-0194-5
Khalil HA, Bhat A, Yusra AI (2012) Green composites from sustainable cellulose nanofibrils: a review. Carbohydr Polym 87:963–979. https://doi.org/10.1016/j.carbpol.2011.08.078
Lee S-Y, Chun S-J, Kang I-A, Park J-Y (2009) Preparation of cellulose nanofibrils by high-pressure homogenizer and cellulose-based composite films. J Ind Eng Chem 15:50–55. https://doi.org/10.1016/j.jiec.2008.07.008
Li Q, Renneckar S (2011) Supramolecular structure characterization of molecularly thin cellulose I nanoparticles. Biomacromol 12:650–659. https://doi.org/10.1021/bm101315y
Li Y, Zhu H, Xu M, Zhuang Z, Xu M, Dai H (2014) High yield preparation method of thermally stable cellulose nanofibers. BioResources 9:1986–1997
Liu W, Mohanty A, Drzal L, Askel P, Misra M (2004) Effects of alkali treatment on the structure, morphology and thermal properties of native grass fibers as reinforcements for polymer matrix composites. J Mater Sci 39:1051–1054. https://doi.org/10.1023/b:jmsc.0000012942.83614.75
Łojewska J, Miśkowiec P, Łojewski T, Proniewicz LM (2005) Cellulose oxidative and hydrolytic degradation: in situ FTIR approach. Polym Degrad Stabil 88:512–520. https://doi.org/10.1016/j.polymdegradstab.2004.12.012
Lu P, Hsieh Y-L (2012a) Highly pure amorphous silica nano-disks from rice straw. Powder Technol 225:149–155. https://doi.org/10.1016/j.powtec.2012.04.002
Lu P, Hsieh Y-L (2012b) Preparation and characterization of cellulose nanocrystals from rice straw. Carbohydr Polym 87:564–573. https://doi.org/10.1016/j.carbpol.2011.08.022
Mamat Razali NA, Wan Ya’acob WMH, Ahmad Rusdi RA, Abdul Aziz F (2017) Extraction of rice straw alpha cellulose micro/nano fibres. Mater Sci Forum 888:244–247. https://doi.org/10.4028/www.scientific.net/MSF.888.244
Mandal A, Chakrabarty D (2011) Isolation of nanocellulose from waste sugarcane bagasse (SCB) and its characterization. Carbohydr Polym 86:1291–1299. https://doi.org/10.1016/j.carbpol.2011.06.030
Manning A, Fricker A, Thompson R (2009) The anomalous effect of high intensity ultrasound on paper fibre-filler combinations. Pigm Resin Technol 38:218–229. https://doi.org/10.1108/03699420910973305
Mansfield SD, Meder R (2003) Cellulose hydrolysis–the role of monocomponent cellulases in crystalline cellulose degradation. Cellulose 10:159–169. https://doi.org/10.1023/a:1024022710366
Martoïa F, Cochereau T, Dumont P, Orgéas L, Terrien M, Belgacem M (2016) Cellulose nanofibril foams: Links between ice-templating conditions, microstructures and mechanical properties. Mater Des 104:376–391
Mishra SP, Manent A-S, Chabot B, Daneault C (2011) Production of nanocellulose from native cellulose: various options utilizing ultrasound. BioResources 7:0422–0436
Mondragon G, Fernandes S, Retegi A, Peña C, Algar I, Eceiza A, Arbelaiz A (2014) A common strategy to extracting cellulose nanoentities from different plants. Ind Crop Prod 55:140–148. https://doi.org/10.1016/j.indcrop.2014.02.014
Moon RJ, Martini A, Nairn J, Simonsen J, Youngblood J (2011) Cellulose nanomaterials review: structure, properties and nanocomposites. Chem Soc Rev 40:3941–3994. https://doi.org/10.1039/c0cs00108b
Nair SS, Zhu JY, Deng Y, Ragauskas AJ (2014) Characterization of cellulose nanofibrillation by micro grinding. J Nanopart Res. https://doi.org/10.1007/s11051-014-2349-7
Nishino T, Matsuda I, Hirao K (2004) All-cellulose composite. Macromolecules 37:7683–7687. https://doi.org/10.1021/ma049300h
Nishiyama Y (2009) Structure and properties of the cellulose microfibril. J Wood Sci 55:241–249. https://doi.org/10.1007/s10086-009-1029-1
Nogi M, Yano H (2008) Transparent nanocomposites based on cellulose produced by bacteria offer potential innovation in the electronics device industry. Adv Mater 20:1849–1852. https://doi.org/10.1002/adma.200702559
Oksman K, Mathew AP, Bondeson D, Kvien I (2006) Manufacturing process of cellulose whiskers/polylactic acid nanocomposites. Compos Sci Technol 66:2776–2784. https://doi.org/10.1016/j.compscitech.2006.03.002
Oun AA, Rhim JW (2016) Isolation of cellulose nanocrystals from grain straws and their use for the preparation of carboxymethyl cellulose-based nanocomposite films. Carbohydr Polym 150:187–200. https://doi.org/10.1016/j.carbpol.2016.05.020
Pääkkö M et al (2007) Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels. Biomacromol 8:1934–1941. https://doi.org/10.1021/bm061215p
Panthapulakkal S, Sain M (2012) Preparation and characterization of cellulose nanofibril films from wood fibre and their thermoplastic polycarbonate composites. Int J Polym Sci. https://doi.org/10.1155/2012/381342
Park S, Baker O, Himmel JEM, Parilla P, Johnson D (2010) Cellulose crystallinity index: measurement techniques and their impact on interpreting cellulase performance. Biotech Biofuels 3:10. https://doi.org/10.1186/1754-6834-3-10
Pickering KL, Beckermann GW, Alam SN, Foreman N (2007) Optimising industrial hemp fibre for composites Compos Part A: Appl Sci Manuf 38:461–468. https://doi.org/10.1016/j.compositesa.2006.02.020
Ray D, Sarkar B, Basak R, Rana A (2002) Study of the thermal behavior of alkali-treated jute fibers. J Appl Polym Sci 85:2594–2599. https://doi.org/10.1002/app.10934
Reddy N, Yang Y (2005) Biofibers from agricultural byproducts for industrial applications. Trends Biotechnol 23:22–27. https://doi.org/10.1016/j.tibtech.2004.11.002
Saito T, Kimura S, Nishiyama Y, Isogai A (2007) Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose. Biomacromol 8:2485–2491. https://doi.org/10.1021/bm0703970
Saito T, Hirota M, Tamura N, Kimura S, Fukuzumi H, Heux L, Isogai A (2009) Individualization of nano-sized plant cellulose fibrils by direct surface carboxylation using TEMPO catalyst under neutral conditions. Biomacromol 10:1992–1996. https://doi.org/10.1021/bm900414t
Segal L, Creely J, Martin A Jr, Conrad C (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29:786–794. https://doi.org/10.1177/004051755902901003
Sihtola H, Neimo L, Sumiala R (1963) Classification of carbonyl groups in cellulose on the basis of their reaction rates at oximation. J Polym Sci Polym Symp 1:289–309. https://doi.org/10.1002/polc.5070020130
Siqueira G, Oksman K, Tadokoro SK, Mathew AP (2016) Re-dispersible carrot nanofibers with high mechanical properties and reinforcing capacity for use in composite materials. Compos Sci Technol 123:49–56. https://doi.org/10.1016/j.compscitech.2015.12.001
Siró I, Plackett D (2010) Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose 17:459–494. https://doi.org/10.1007/s10570-010-9405-y
Soyekwo F, Zhang QG, Lin XC, Wu XM, Zhu AM, Liu QL (2016) Facile preparation and separation performances of cellulose nanofibrous membranes. J Appl Polym Sci. https://doi.org/10.1002/app.43544
Svagan AJ, Jensen P, Dvinskikh SV, Furó I, Berglund LA (2010) Towards tailored hierarchical structures in cellulose nanocomposite biofoams prepared by freezing/freeze-drying. J Mater Chem 20:6646. https://doi.org/10.1039/c0jm00779j
Svensson A, Nicklasson E, Harrah T, Panilaitis B, Kaplan D, Brittberg M, Gatenholm P (2005) Bacterial cellulose as a potential scaffold for tissue engineering of cartilage. Biomaterials 26:419–431. https://doi.org/10.1016/j.biomaterials.2004.02.049
Taipale T, Österberg M, Nykänen A, Ruokolainen J, Laine J (2010) Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strength. Cellulose 17:1005–1020. https://doi.org/10.1007/s10570-010-9431-9
Takagi H, Asano A (2008) Effects of processing conditions on flexural properties of cellulose nanofiber reinforced “green” composites. Compos Part A-Appl Sci 39:685–689. https://doi.org/10.1016/j.compositesa.2007.08.019
Tischer PCF, Sierakowski MR, Westfahl H Jr, Tischer CA (2010) Nanostructural reorganization of bacterial cellulose by ultrasonic treatment. Biomacromol 11:1217–1224. https://doi.org/10.1021/bm901383a
Tonoli GH, Teixeira EM, Correa AC, Marconcini JM, Caixeta LA, Pereira-da-Silva MA, Mattoso LH (2012) Cellulose micro/nanofibres from Eucalyptus kraft pulp: preparation and properties. Carbohydr Polym 89:80–88. https://doi.org/10.1016/j.carbpol.2012.02.052
Tonoli G et al (2016) Properties of cellulose micro/nanofibers obtained from eucalyptus pulp fiber treated with anaerobic digestate and high shear mixing. Cellulose 23:1239–1256. https://doi.org/10.1007/s10570-016-0890-5
Turai LL (1982) Deinking of wastepaper: an overview. In: Mittal KL, Fendler EJ (eds) Solution behavior of surfactants: theoretical and applied aspects Volume 2. Springer, Boston, MA, pp 1381–1390. https://doi.org/10.1007/978-1-4613-3494-1_43
Uetani K, Yano H (2010) Nanofibrillation of wood pulp using a high-speed blender. Biomacromol 12:348–353. https://doi.org/10.1021/bm101103p
Wang S, Cheng Q (2009) A novel process to isolate fibrils from cellulose fibers by high-intensity ultrasonication, Part 1: Process optimization. J Appl Polym Sci 113:1270–1275. https://doi.org/10.1002/app.30072
Wang X, Wu Y, Huang JT (2011) Investigation of morphology of vetier (vetiveria zizanioides) cellulose micro/nano fibrils isolated by high intensity ultrasonication. Adv Mat Res 284–286:796–800
Wise LE (1946) Chlorite holocellulose, its fractionation and bearing on summative wood analysis and on studies on the hemicelluloses. Pap Trade J 122:35–43
Wu Y, Zhou D-G, Wang S-Q, Zhang Y (2009) Polypropylene composites reinforced with rice straw micro/nano fibrils isolated by high intensity ultrasonication. BioResources 4:1487–1497
Zhang W, Zhang Y, Lu C, Deng Y (2012) Aerogels from crosslinked cellulose nano/micro-fibrils and their fast shape recovery property in water. J Mater Chem 22:11642–11650. https://doi.org/10.1039/C2JM30688C
Zhao H-P, Feng X-Q, Gao H (2007) Ultrasonic technique for extracting nanofibers from nature materials. Appl Phys Lett 90:073112. https://doi.org/10.1063/1.2450666
Zimmermann T, Bordeanu N, Strub E (2010) Properties of nanofibrillated cellulose from different raw materials and its reinforcement potential. Carbohydr Polym 79:1086–1093. https://doi.org/10.1016/j.carbpol.2009.10.045
Acknowledgments
The authors are grateful to the University of Tehran, Iran, for the support of analytical and laboratory instruments of this research.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Dilamian, M., Noroozi, B. A combined homogenization-high intensity ultrasonication process for individualizaion of cellulose micro-nano fibers from rice straw. Cellulose 26, 5831–5849 (2019). https://doi.org/10.1007/s10570-019-02469-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-019-02469-y