The solubility of PuF3 and CeF3 in melt of the salt 46.5LiF–11.5NaF–42KF with eutectic composition at 550–690°C was measured and their solubility was found to be high (~30 mol. fraction at 700°C). It was shown that CeF3 can serve to imitate PuF3 in a wide temperature range.
Similar content being viewed by others
References
O. Benes and R. Konings, “Actinide burner fuel: potential compositions based on the thermodynamics evaluation of MF–PuF3 (M = Li, Na, K, Rb, Cs) and LaF3–PuF3 systems,” J. Nucl. Mater., 377, No. 3, 449–457 (2008).
M. B. Seregin, A. P. Parshin, A. Yu. Kuznetsov, et al., “UF4, ThF4 and CeF3 solubility in LiF–NaF–KF melt,” Radiokhim., 53, No. 5, 416–418 (2011).
A. A. Lizin, S. V. Tomilin, O. E. Gnevashov, et al., “PuF3, AmF3, CeF3, and NdF3 solubility in the LiF–NaF–KF melt,” At. Énerg., 115, No. 1, 11–16 (2013).
J. Mailen, F. Smith, and L. Ferris, “Solubility of PuF3 in molten 2LiF–BeF2,” J. Chem. and Eng., 16, No. 1, 68–69 (1971).
A. M. Degtyarev and L. I. Ponomarev, “Molten-salt reactor with a fast neutron spectrum,” Radiokhim., 53, No. 5, 367–368 (2011).
Author information
Authors and Affiliations
Additional information
Translated from Atomnaya Énergiya, Vol. 115, No. 1, pp. 17–19, July, 2013.
Rights and permissions
About this article
Cite this article
Volozhin, M.V., Zakirov, R.Y., Mushnikov, P.N. et al. CeF3, PuF3 Solubility in LiF–NaF–KF Melt. At Energy 115, 18–21 (2013). https://doi.org/10.1007/s10512-013-9741-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10512-013-9741-8