Abstract
Two series of novel 4-chloro-2-(benzylthio)-5-(1,3,4-oxadiazol-2-yl)benzenesulfonamides and their N-aroyl derivatives have been synthesized and evaluated for in vitro anticancer activity against the full NCI-60 cell line panel. Most of the compounds exhibited antiproliferative activity. Among them a compound bearing an N-(thien-2-ylcarbonyl) moiety showed broad-spectrum activity with 50% growth inhibition (GI50) values in the range of 2.02–7.82 μM over 50 cell lines.
Graphical abstract
.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
Aryl- and heteroarylsulfonamides are an important class of therapeutic agents in current medicinal science [1]. Various arylsulfonamides have been reported to possess anticancer [2–6] and/or anti-human immunodeficiency virus (HIV) properties [6, 7]. Our systematic studies on the synthesis of 1,4,2-benzodithiazine 1,1-dioxides and their subsequent transformations into 2-mercaptobenzenesulfonamide (MBSA) derivatives (Fig. 1) having a variety of heterocyclic ring systems or acyclic polynitrogen moieties at the sulfonamide functionality resulted in promising anticancer [8–13], HIV antiviral [14–16], or antibacterial agents [17] as well as potent inhibitors of transmembrane cancer-associated carbonic anhydrase isozymes hCAIX and hCAXII [18, 19].
A number of structurally novel N-acylbenzenesulfonamides have recently been reported either as potent antitumor agents against a broad spectrum of human tumor xenografts (colon, lung, breast, ovary, and prostate) in nude mice [22] (Fig. 2) or clinically investigated drug candidates with cytostatic activity against malignant tumors such as Eli Lilly’s tasisulam sodium [23] or Abbott’s WO-2002024636, ABT-737 [24], and ABT-263 [25] (Fig. 3).
This led us to an assumption that expansion of the series of 2-mercapto-N-acylbenzenesulfonamide potential anticancer agents, in which groups of varying size and electronic properties are placed at positions 2, 5, and N- of the benzenesulfonamide ring, may shed light on the structural features contributing to the biological activities.
Results and discussion
Chemistry
Several methods for synthesis of 2-mercaptobenzenesulfonamides are known. The simplest and most efficient method employs the ring-opening reaction of preformed 3-mercapto-1,1-dioxo-1,4,2-benzodithiazine derivatives under alkaline conditions [27]. Alternatively, access to 2-mercaptobenzenesulfonamides is provided by direct reaction of 2-halogenobenzenesulfonamides with sodium polysulfide (Na2S x ) [28] or conversion of 2-aminobenzenesulfonamides via diazonium salt decomposition utilizing disodium sulfide (Na2S) or potassium ethyl xanthate [28–30]. Herein, we report a direct synthetic route to novel 4-chloro-2-benzylthiobenzenesulfonamides and their N-acylated derivatives. Due to our ongoing research in the field of biologically active 2-mercaptobenzenesulfonamides with five-membered rings incorporated in 5-position of the MBSA scaffold [9], we choose 1,3,4-oxadiazole as our model heterocyclic residue.
The expected 1,3,4-oxadiazoles 1a, 1b were conveniently prepared in good yields by the reaction of 2,4-dichloro-5-sulfamoylbenzhydrazide [31] with orthoesters in refluxing glacial acetic acid (Scheme 1).
We found that 2,4-dichloro-5-(1,3,4-oxadiazol-2-yl)benzenesulfonamide (1a) under standard conditions (BnSH/K2CO3/DMF (N,N-dimethylformamide)/RT) undergoes a selective SNAr addition–elimination reaction in 2-position. Moderate yields (14–58%, Table 1, entries 1–4, 6, and 8) of this reaction led us to optimize the conditions. Higher yields were observed when tetrabutylammonium bromide (TBAB) was used as a phase-transfer catalyst, especially in acetonitrile/water (300:1, v/v) reaction environment (Table 1, entry 9). Slight decrease of substrate conversion was observed in the absence of argon atmosphere (Scheme 1).
The desired N-acylsulfonamides 4a–4j (Scheme 2) were prepared by carbodiimide-mediated coupling of aromatic carboxylic acids with sulfonamides [32–34] promoted by 4-(N,N-dimethylamino)pyridine (DMAP) in the appropriate solvent. In some cases crystalline 4-(N,N-dimethylamino)pyridinium N-heteroaroylsulfonamidates (3a–3c) were isolated and characterized, which by treatment with 10% (w/v) ethanolic p-toluenesulfonic acid (p-TSA) solution were converted to the desired N-acylsulfonamides 4a–4c.
In vitro biological activity
Compounds 2a–2d and 4a–4j submitted to National Cancer Institute (NCI) were evaluated for their in vitro anticancer activity. Sulfonamides 2a and 2c showed significant selectivity toward leukemia cell line CCRF-CEM (Fig. 4), whereas 2d appears to be substantially inactive.
HOP-92, non-small cell lung cancer, and renal cancer A498 cell lines reveal some insight into structure–activity relationship (SAR). Cytostatic activity of 2a–2c toward those cell lines increases when CLogP and calculated molar refractivity (CMR) of the compound increase (Table 2).
Over a series of N-(thien-2-ylcarbonyl)benzenesulfonamide derivatives (4c–4g), substitution on the heterocyclic (4e, 4f: R1 = Me) or benzylthio (4d, 4f: R2 = Cl) moiety decreases activity significantly. It seems interesting that closely related six-membered N-heteroaroyl derivatives (4a, 4b, and 4h) showed no activity, which renders 4c as a lead for further optimization.
Compound 4c (NSC 754633) which satisfied predetermined threshold inhibition criteria was selected for the NCI five-dose (0.01–100 μM) assay and exhibited remarkable anticancer activity against most of the tested cell lines representing nine different subpanels (Table 3). Only NCI/ADR-RES (adriamycin-resistant cell line) expressing high levels of MDR1 and Pgp-170 glycoprotein [36, 37] was found to be insensitive at the highest tested concentration (100 μM). The obtained data revealed some subpanel sensitivity toward renal, central nervous system (CNS), and breast cancer cell lines (subpanel selectivity ratio: 1.04–1.46). The CNS cancer subpanel showed highest sensitivity with mean GI50 value of 3.24 μM and mean concentration causing total growth inhibition at 12.68 μM level. It is worth mentioning that the cytotoxic effect of 4c was less pronounced in the leukemia subpanel [50% lethal concentration (LC50) for all tested leukemia cell lines >100 μM]. A relatively large difference in mean cytostatic (mean-graph GI50 = 4.27 μM) and cytotoxic (mean-graph LC50 = 58.88 μM) indicators could be projected to potential low toxicity against normal cells resulting in a broad therapeutic index.
COMPARE [38, 39] analysis at the NCI of compound 4c showed moderate Pearson correlation coefficient (PCC = 0.446–0.549) with DNA interfering agents such as actinomycin D, echinomycin, bruceantin, chromomycin A3, or didemnin B (Table 4).
Conclusions
We designed a new and efficient method of obtaining substituted 2-mercaptobenzenesulfonamides from readily available 2,4-dichlorobenzenesulfonamides under optimized mild phase-transfer catalysis conditions. This approach offers easy and quick isolation of the products and preparative-scale synthesis. Novel 2-mercaptobenzenesulfonamides and their structurally diverse N-(hetero)aroyl derivatives were evaluated for in vitro antiproliferative activity. The discovered N-acylbenzenesulfonamide 4c shows promising anticancer activity toward 50 human cancer cell lines and could be considered as a lead for further optimization.
Experimental
Melting points were determined with a Boëtius apparatus. Infrared (IR) spectra were taken using a Thermo Mattson Satellite FTIR spectrophotometer, 1H and 13C nuclear magnetic resonance (NMR) were taken with a Varian Gemini 200 MHz or Varian Unity Plus 500 MHz spectrometer. Chemical shifts are reported in ppm (\( \delta \)). The results of elemental analyses for C, H, and N were in agreement with the calculated values within ±0.4% range. Column chromatography was carried out on silica gel Fluka Silica gel 60 (0.035–0.070 mm). The starting 2,4-dichloro-5-sulfamoylbenzhydrazide was obtained from commercially available 2,4-dichloro-5-sulfamoylbenzoic acid according to methods described previously [31].
General procedure for the synthesis of 1a, 1b
A mixture of 2.84 g 2,4-dichloro-5-sulfamoylbenzhydrazide (10 mmol) and the appropriate orthoester (60 mmol) in 30 cm3 glacial AcOH was refluxed for 7–12 h. After cooling to room temperature, stirring was continued overnight. The precipitate was filtered off, washed with cold EtOH and petroleum ether, and purified by crystallization from EtOH.
2,4-Dichloro-5-(1,3,4-oxadiazol-2-yl)benzenesulfonamide (1a, C8H5Cl2N3O3S)
Starting from 8.89 g triethyl orthoformate. Yield: 2.42 g (82%); m.p.: 195–197 °C; R f = 0.59 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,323, 3,229, 3,165, 3,100, 1,359, 1,340, 1,168 cm−1; 1H NMR (200 MHz, DMSO-d 6 ): \( \delta \) = 7.97 (s, 2H, SO2NH2), 8.20 (s, 1H, H-3), 8.56 (s, 1H, H-6), 9.54 (s, 1H, Ar–H) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 121.84, 131.12, 134.09, 134.56, 136.02, 140.83, 155.47, 160.89 ppm.
2,4-Dichloro-5-(5-methyl-1,3,4-oxadiazol-2-yl)benzenesulfonamide (1b, C9H7Cl2N3O3S)
Starting from 9.73 g triethyl orthoacetate. Yield: 2.13 g (69%); m.p.: 217–219 °C; R f = 0.61 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,305, 3,205, 3,094, 1,579, 1,542, 1,460, 1,354, 1,174 cm−1; 1H NMR (200 MHz, DMSO-d 6 ): \( \delta \) = 2.64 (s, 3H, CH3), 7.95 (s, 2H, SO2NH2), 8.18 (s, 1H, H-3), 8.51 (s, 1H, H-6) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 10.93, 122.02, 130.75, 134.08, 134.21, 135.74, 140.77, 161.04, 165.08 ppm.
General procedure for the synthesis of 2a–2d
To a suspension of the appropriate 2,4-dichlorobenzenesulfonamide 1a, 1b (5 mmol) in 30 cm3 MeCN and 0.1 cm3 water, 1.52 g K2CO3 (11 mmol) and 0.016 g TBAB (0.05 mmol) were added. The obtained reaction mixture was vigorously stirred under an argon atmosphere, and slowly the appropriate mercaptan (5 mmol) was added dropwise. After 24 h of stirring at room temperature, the reaction mixture was concentrated under reduced pressure to dryness, and 15 cm3 EtOH was added. The precipitate was filtered off and suspended in 30 cm3 water, stirred for 30 min, and filtered off. The crude product was purified by crystallization from EtOH.
2-Benzylthio-4-chloro-5-(1,3,4-oxadiazol-2-yl)benzenesulfonamide (2a, C15H12ClN3O3S2)
Starting from 1.47 g 1a and 0.62 g benzyl mercaptan. Yield: 1.55 g (81%); m.p.: 153–154 °C; R f = 0.64 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,435, 3,332, 3,142, 2,926, 1,590, 1,532, 1,495, 1,450, 1,350, 1,161 cm−1; 1H NMR (500 MHz, DMSO-d 6 ): \( \delta \) = 4.54 (s, 2H, SCH2), 7.29–7.32 (m, 1H, Ar–H), 7.36–7.39 (m, 2H, Ar–H), 7.52–7.54 (m, 2H, Ar–H), 7.73 (s, 2H, SO2NH2), 7.84 (s, 1H, H-3), 8.42 (s, 1H, H-6), 9.48 (s, 1H, Ar–H) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 36.16, 118.23, 127.88, 128.89, 129.12, 129.61, 130.29, 135.19, 135.57, 139.55, 143.08, 155.18, 161.33 ppm.
2-Benzylthio-4-chloro-5-(5-methyl-1,3,4-oxadiazol-2-yl)benzenesulfonamide (2b, C16H14ClN3O3S2)
Starting from 1.54 g 1b and 0.62 g benzyl mercaptan. Yield: 1.54 g (78%); m.p.: 208–210 °C; R f = 0.67 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,429, 3,246, 2,924, 2,854, 1,624, 1,591, 1,577, 1,558, 1,525, 1,495, 1,347, 1,165 cm−1; 1H NMR (500 MHz, DMSO-d 6 ): \( \delta \) = 2.58 (s, 3H, CH3), 4.50 (s, 2H, SCH2), 7.27–7.30 (m, 1H, Ar–H), 7.34–7.37 (m, 2H, Ar–H), 7.44–7.46 (m, 2H, Ar–H), 7.74 (s, 2H, SO2NH2), 7.78 (s, 1H, H-3), 8.35 (s, 1H, H-6) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 10.87, 36.23, 118.89, 127.87, 128.70, 128.96, 129.14, 129.26, 129.33, 129.47, 129.60, 133.49, 135.70, 137.31, 145.04, 161.70, 164.32 ppm.
4-Chloro-2-(4-chlorobenzylthio)-5-(1,3,4-oxadiazol-2-yl)benzenesulfonamide (2c, C15H11Cl2N3O3S2)
Starting from 1.47 g 1a and 0.79 g 4-chlorobenzyl mercaptan. Yield: 1.58 g (76%); m.p.: 185–187 °C; R f = 0.63 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,248, 3,156, 3,087, 2,918, 2,858, 1,589, 1,530, 1,490, 1,440, 1,350, 1,333, 1,162 cm−1; 1H NMR (500 MHz, DMSO-d 6 ): \( \delta \) = 4.55 (s, 2H, SCH2), 7.42–7.44 (m, 2H, Ar–H), 7.55–7.57 (m, 2H, Ar–H), 7.73 (s, 2H, SO2NH2), 7.84 (s, 1H, H-3), 8.42 (s, 1H, H-6), 9.48 (s, 1H, Ar–H) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 35.29, 118.41, 128.84, 129.32, 130.29, 131.42, 132.49, 134.86, 135.20, 139.74, 142.55, 155.19, 161.29 ppm.
4-Chloro-2-(4-chlorobenzylthio)-5-(5-methyl-1,3,4-oxadiazol-2-yl)benzenesulfonamide (2d, C16H13Cl2N3O3S2)
Starting from 1.54 g 1b and 0.79 g 4-chlorobenzyl mercaptan. Yield: 1.79 g (83%); m.p.: 250–252 °C; R f = 0.68 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,363, 3,239, 2,925, 2,853, 1,636, 1,587, 1,574, 1,559, 1,520, 1,493, 1,456, 1,349, 1,167 cm−1; 1H NMR (500 MHz, DMSO-d 6 ): \( \delta \) = 2.59 (s, 3H, CH3), 4.51 (s, 2H, SCH2), 7.41–7.43 (m, 2H, Ar–H), 7.47–7.49 (m, 2H, Ar–H), 7.76–7.77 (m, 3H, H-3 and SO2NH2), 8.35 (s, 1H, H-6) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 10.87, 35.36, 119.03, 128.78, 128.94, 129.48, 131.27, 132.50, 133.51, 134.94, 137.44, 144.62, 161.67, 164.34 ppm.
General procedure for the synthesis of 2-benzylthio-4-chloro-5-(1,3,4-oxadiazol-2-yl)-4-(N,N-dimethylamino)pyridinium N-acylbenzenesulfonamidates 3a–3c
To the appropriate carboxylic acid (1.1 mmol) in 5 cm3 dry MeCN, 0.212 g 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDCI, 1.1 mmol) was added and stirred for 5 min. 2a (0.382 g, 1 mmol) and 0.256 g DMAP (2.1 mmol) were added, and the reaction mixture was stirred at room temperature overnight. The precipitate was filtered off and washed with cold MeCN and MeOH. The crude salt was purified by crystallization from MeOH.
4-(N,N-Dimethylamino)pyridinium 2-benzylthio-4-chloro-5-(1,3,4-oxadiazol-2-yl)-N-(pyrazine-2-carbonyl)benzenesulfonamidate (3a, C27H24ClN7O4S2)
Starting from 0.137 g pyrazine-2-carboxylic acid. Yield: 0.338 g (55%); m.p.: 209–210 °C; R f = 0.14 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,198, 3,109, 3,056, 2,924, 1,646, 1,612, 1,589, 1,562, 1,498, 1,323, 1,142 cm−1; 1H NMR (200 MHz, DMSO-d 6 ): \( \delta \) = 3.17 (s, 6H, N(CH3)2), 4.35 (s, 2H, SCH2), 6.94–6.98 (m, 2H, Ar–H), 7.19–7.22 (m, 3H, Ar–H), 7.32–7.37 (m, 2H, Ar–H), 7.58 (s, 1H, H-3), 8.20–8.23 (m, 2H, Ar–H), 8.49 (s, 1H, H-6), 8.62–8.63 (m, 2H, Ar–H), 9.09 (s, 1H, Ar–H), 9.44 (s, 1H, Ar–H), 13.22 (br s, 1H, NH+) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 35.76, 107.14, 117.12, 127.52, 127.67, 128.64, 129.25, 132.10, 133.50, 136.12, 139.51, 141.52, 143.23, 144.00, 145.22, 145.57, 150.80, 154.98, 157.13, 161.75, 167.83 ppm.
4-(N,N-Dimethylamino)pyridinium 2-benzylthio-4-chloro-5-(1,3,4-oxadiazol-2-yl)-N-(pyridine-2-carbonyl)benzenesulfonamidate (3b, C28H25ClN6O4S2)
Starting from 0.135 g pyridine-2-carboxylic acid. Yield: 0.219 g (36%); m.p.: 217–219 °C; R f = 0.22 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,195, 3,107, 2,924, 1,646, 1,607, 1,588, 1,562, 1,496, 1,324, 1,141 cm−1; 1H NMR (200 MHz, DMSO-d 6 ): \( \delta \) = 3.16 (s, 6H, N(CH3)2), 4.32 (s, 2H, SCH2), 6.91–6.95 (m, 2H, Ar–H), 7.18–7.21 (m, 3H, Ar–H), 7.31–7.32 (m, 2H, Ar–H), 7.41–7.45 (m, 1H, Ar–H), 7.57 (s, 1H, H-3), 7.78–7.86 (m, 1H, Ar–H), 7.94–7.98 (m, 1H, Ar–H), 8.23–8.26 (m, 2H, Ar–H), 8.50 (s, 1H, H-6), 8.55–8.57 (m, 2H, Ar–H), 9.45 (s, 1H, Ar–H), 13.20 (br s, 1H, NH+) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 35.80, 107.05, 117.09, 123.74, 125.21, 127.49, 127.65, 128.63, 129.26, 132.30, 133.45, 136.04, 136.91, 139.89, 141.62, 143.21, 148.68, 154.99, 155.48, 157.00, 161.77, 169.37 ppm.
4-(N,N-Dimethylamino)pyridinium 2-benzylthio-4-chloro-5-(1,3,4-oxadiazol-2-yl)-N-(thien-2-ylcarbonyl)benzenesulfonamidate (3c, C27H24ClN5O4S3)
Starting from 0.141 g thiophene-2-carboxylic acid. Yield: 0.295 g (48%); m.p.: 201–202 °C; R f = 0.16 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,214, 3,090, 2,924, 1,649, 1,591, 1,565, 1,315, 1,138 cm−1; 1H NMR (200 MHz, DMSO-d 6 ): \( \delta \) = 3.17 (s, 6H, N(CH3)2), 4.33 (s, 2H, SCH2), 6.94–6.98 (m, 3H, Ar–H), 7.18–7.21 (m, 3H, Ar–H), 7.36–7.38 (m, 3H, Ar–H), 7.49–7.50 (m, 2H, H-3 and Ar–H), 8.18–8.22 (m, 2H, Ar–H), 8.44 (s, 1H, H-6), 9.43 (s, 1H, Ar–H), 13.18 (br s, 1H, NH+) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 35.75, 107.20, 116.90, 127.31, 127.49, 128.66, 128.90, 129.04, 129.31, 129.56, 132.09, 133.14, 136.22, 139.51, 142.21, 143.27, 145.46, 154.93, 157.14, 161.81, 165.81 ppm.
General procedure for the synthesis of N-acylbenzenesulfonamides 4a–4c
To a suspension of the appropriate pyridinium salt 3a–3c (0.5 mmol) in 5 cm3 EtOH, 2 cm3 10% p-TSA solution in EtOH was added and stirred at room temperature for 1 h. The precipitate was filtered off and washed with EtOH and water.
2-Benzylthio-4-chloro-5-(1,3,4-oxadiazol-2-yl)-N-(pyrazine-2-carbonyl)benzenesulfonamide (4a, C20H14ClN5O4S2)
Yield: 0.242 g (99%); m.p.: 294–296 °C; R f = 0.10 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,485, 3,364, 3,298, 3,203, 2,871, 1,612, 1,585, 1,549, 1,492, 1,450, 1,362, 1,159 cm−1; 1H NMR (500 MHz, DMSO-d 6 ): \( \delta \) = 4.51 (s, 2H, SCH2), 7.08–7.17 (m, 3H, Ar–H), 7.29–7.31 (m, 2H, Ar–H), 7.89 (s, 1H, H-3), 8.58 (s, 1H, H-6), 8.81 (s, 1H, Ar–H), 8.94 (s, 1H, Ar–H), 9.08 (s, 1H, Ar–H), 9.47 (s, 1H, Ar–H) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 35.98, 118.54, 127.81, 128.61, 129.27, 129.74, 133.91, 135.58, 136.99, 143.88, 144.09, 144.87, 148.89, 155.25, 161.03, 163.39, 163.44 ppm.
2-Benzylthio-4-chloro-5-(1,3,4-oxadiazol-2-yl)-N-(pyridine-2-carbonyl)benzenesulfonamide (4b, C20H14ClN5O4S2)
Yield: 0.241 g (99%); m.p.: 173–175 °C; R f = 0.40 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,138, 2,924, 2,854, 1,730, 1,647, 1,590, 1,530, 1,496, 1,450, 1,347, 1,174 cm−1; 1H NMR (200 MHz, DMSO-d 6 ): \( \delta \) = 4.47 (s, 2H, SCH2), 7.02–7.19 (m, 3H, Ar–H), 7.26–7.30 (m, 2H, Ar–H), 7.82 (s, 1H, H-3), 7.88–7.95 (m, 1H, Ar–H), 8.12–8.16 (m, 1H, Ar–H), 8.26–8.35 (m, 1H, Ar–H), 8.57 (s, 1H, H-6), 8.76–8.78 (m, 1H, Ar–H), 9.47 (s, 1H, Ar–H) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 35.82, 118.20, 124.54, 127.67, 128.58, 128.79, 129.19, 129.30, 133.37, 135.73, 136.07, 136.66, 141.76, 143.52, 146.77, 147.41, 155.18, 161.20, 162.66 ppm.
2-Benzylthio-4-chloro-5-(1,3,4-oxadiazol-2-yl)-N-(thien-2-ylcarbonyl)benzenesulfonamide (4c, C20H14ClN3O4S3)
Yield: 0.244 g (99%); m.p.: 282–284 °C; R f = 0.12 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,382, 3,354, 3,253, 3,106, 1,614, 1,601, 1,579, 1,565, 1,549, 1,332, 1,318, 1,176 cm−1; 1H NMR (200 MHz, DMSO-d 6 ): \( \delta \) = 4.51 (s, 2H, SCH2), 7.30–7.76 (m, 12H, H-3 and Ar–H), 8.35 (s, 1H, H-6) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 36.26, 118.90, 119.01, 126.03, 127.87, 128.46, 128.72, 128.96, 129.25, 129.50, 132.64, 135.75, 137.16, 137.65, 144.38, 155.74, 159.68 ppm.
4-Chloro-2-(4-chlorobenzylthio)-5-(1,3,4-oxadiazol-2-yl)-N-(thien-2-ylcarbonyl)benzenesulfonamide (4d, C20H13Cl2N3O4S3)
To a solution of 0.128 g thiophene-2-carboxylic acid (1 mmol) in 3 cm3 dry MeCN, 0.192 g EDCI (1 mmol) was added and stirred at room temperature for 5 min. 2c (0.416 g, 1 mmol) and 0.184 g DMAP (1.5 mmol) were added and stirred at room temperature for 18 h. The reaction mixture was acidified with 2 cm3 10% p-TSA/MeCN and concentrated under reduced pressure, and the residue was chromatographed with CH2Cl2/MeOH/AcOH (97:1:2) on silica gel column giving pure 4d. Yield: 0.248 g (47%); R f = 0.16 (benzene/EtOH = 4:1); m.p.: 205–207 °C; IR (KBr): \( \bar{\nu } \) = 3,164, 3,094, 2,841, 1,678, 1,591, 1,526, 1,491, 1,450, 1,352, 1,262, 1,170 cm−1; 1H NMR (200 MHz, DMSO-d 6 ): \( \delta \) = 4.55 (s, 2H, SCH2), 7.08–7.12 (m, 2H, Ar–H), 7.23–7.27 (m, 1H, Ar–H), 7.32–7.37 (m, 2H, Ar–H), 7.44–7.46 (m, 1H, Ar–H), 7.90 (s, 1H, H-3), 7.97–8.00 (m, 1H, Ar–H), 8.53 (s, 1H, H-6), 9.48 (s, 1H, Ar–H) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 35.02, 118.77, 128.57, 129.02, 129.97, 131.00, 131.35, 132.37, 133.00, 134.08, 134.90, 135.32, 135.43, 136.59, 136.95, 142.89, 155.23, 159.97, 160.99 ppm.
2-Benzylthio-4-chloro-5-(5-methyl-1,3,4-oxadiazol-2-yl)-N-(thien-2-ylcarbonyl)benzenesulfonamide (4e, C21H16ClN3O4S3)
To a solution of 0.128 g thiophene-2-carboxylic acid (1 mmol) in 3 cm3 dry MeCN, 0.192 g EDCI (1 mmol) was added and stirred for 5 min. 2b (0.396 g, 1 mmol) and 0.184 g DMAP (1.5 mmol) were added and stirred at room temperature for 18 h. The obtained solution was concentrated under reduced pressure, and 2 cm3 10% p-TSA/EtOH was added with vigorous stirring. The obtained suspension was left in the refrigerator overnight. The formed crystalline solid was filtered off and washed with cold EtOH. Yield: 0.213 g (42%); m.p.: 230–231 °C; R f = 0.17 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,098, 2,925, 2,854, 1,658, 1,591, 1,577, 1,525, 1,495, 1,453, 1,361, 1,176 cm−1; 1H NMR (500 MHz, DMSO-d 6 ): \( \delta \) = 2.62 (s, 3H, CH3), 4.50 (s, 2H, SCH2), 7.21–7.23 (m, 1H, Ar–H), 7.28–7.31 (m, 1H, Ar–H), 7.34–7.37 (m, 2H, Ar–H), 7.44–7.46 (m, 2H, Ar–H), 7.79 (s, 1H, H-3), 7.97–7.98 (m, 1H, Ar–H), 8.15–8.16 (m, 1H, Ar–H), 8.50 (s, 1H, H-6) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 10.87, 36.39, 118.83, 127.98, 128.56, 129.02, 129.56, 132.56, 132.64, 133.06, 133.48, 135.35, 135.48, 136.27, 147.66, 160.11, 161.39, 164.43 ppm.
4-Chloro-2-(4-chlorobenzylthio)-5-(5-methyl-1,3,4-oxadiazol-2-yl)-N-(thien-2-ylcarbonyl)benzenesulfonamide (4f, C21H15Cl2N3O4S3)
To a solution of 0.128 g thiophene-2-carboxylic acid (1 mmol) in 5 cm3 dry tetrahydrofuran (THF), 0.206 g 1,3-dicyclohexylcarbodiimide (DCC, 1 mmol) was added and stirred for 5 min at room temperature. 2d (0.430 g, 1 mmol) and 0.184 g DMAP (1.5 mmol) were added and stirred at room temperature for 48 h. By-products were filtered out and washed thoroughly with THF. The filtrate was acidified with 2 cm3 10% p-TSA/EtOH and concentrated under reduced pressure, and the resulting oily residue was chromatographed with AcOEt/petroleum ether (1:1) on silica gel column giving pure 4f. Yield: 0.135 g (25%); m.p.: 134–136 °C; R f = 0.22 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,422, 2,925, 2,855, 1,654, 1,575, 1,523, 1,490, 1,360, 1,261, 1,169 cm−1; 1H NMR (200 MHz, DMSO-d 6 ): \( \delta \) = 2.63 (s, 3H, CH3), 4.52 (s, 2H, SCH2), 7.20–7.24 (m, 1H, Ar–H), 7.39–7.51 (m, 4H, Ar–H), 7.77 (s, 1H, H-3), 7.97–7.99 (m, 2H, Ar–H), 8.15–8.17 (m, 1H, Ar–H), 8.51 (s, 1H, H-6) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 10.58, 35.22, 118.62, 128.30, 128.48, 128.71, 131.06, 132.34, 132.76, 133.20, 134.27, 135.18, 135.97, 146.95, 159.82, 161.06, 164.15 ppm.
2-Benzylthio-4-chloro-N-(5-chlorothien-2-ylcarbonyl)-5-(1,3,4-oxadiazol-2-yl)benzenesulfonamide (4g, C20H13Cl2N3O4S3)
To a solution of 0.164 g 5-chlorothiophene-2-carboxylic acid (1 mmol) in 5 cm3 dry MeCN, 0.192 g EDCI (1 mmol) was added and stirred at room temperature for 5 min. 2a (0.382 g, 1 mmol) and 0.184 g DMAP (1.5 mmol) were added and stirred at room temperature for 12 h. The obtained solution was acidified with 2 cm3 10% p-TSA/MeCN and stirred under cooling (ice bath) for 2 h. The precipitated white solid was filtered off and purified by crystallization from MeCN. Yield: 0.268 g (51%); m.p.: 254–255 °C; R f = 0.12 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,160, 3,098, 2,924, 2,855, 2,717, 1,683, 1,592, 1,559, 1,531, 1,472, 1,351, 1,328, 1,168 cm−1; 1H NMR (500 MHz, DMSO-d 6 ): \( \delta \) = 4.51 (s, 2H, SCH2), 7.15–7.22 (m, 3H, Ar–H), 7.24–7.25 (s, 1H, Ar–H), 7.33–7.35 (m, 2H, Ar–H), 7.83 (s, 1H, H-3), 7.87 (s, 1H, Ar–H), 8.49 (s, 1H, H-6), 9.46 (s, 1H, Ar–H) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 35.64, 118.22, 127.52, 128.39, 128.81, 129.01, 129.37, 132.56, 133.56, 134.98, 135.25, 135.75, 136.51, 136.62, 143.19, 154.91, 159.11, 160.73 ppm.
2-Benzylthio-4-chloro-5-(1,3,4-oxadiazol-2-yl)-N-(pyridine-3-carbonyl)benzenesulfonamide (4h, C21H15ClN4O4S2)
To a suspension of 0.135 g pyridine-3-carboxylic acid (1.1 mmol) in 5 cm3 dry MeCN, 0.212 g EDCI (1.1 mmol) was added and stirred for 5 min at room temperature. 2a (0.382 g, 1 mmol) and 0.184 g DMAP (1.5 mmol) were added and stirred for 18 h at room temperature. The precipitate was filtered off, washed with MeCN, and then suspended in 1 cm3 EtOH, acidified with 1 cm3 10% p-TSA/EtOH, and stirred for 2 h at room temperature. The precipitate was filtered off, washed with EtOH, and purified by extraction of contaminants with hot MeCN. Yield: 0.122 g (25%); m.p.: 282–284 °C; R f = 0.30 (benzene/EtOH = 4:1); IR (KBr): \( \bar{\nu } \) = 3,436, 3,096, 3,060, 2,926, 1,633, 1,589, 1,565, 1,520, 1,495, 1,355, 1,135 cm−1; 1H NMR (200 MHz, DMSO-d 6 ): \( \delta \) = 4.47 (s, 2H, SCH2), 7.20–7.33 (m, 5H, Ar–H), 7.73–7.78 (m, 2H, H-3 and Ar–H), 8.49–8.55 (m, 2H, H-6 and Ar–H), 8.85–8.87 (m, 1H, Ar–H), 8.09 (s, 1H, Ar–H), 8.47 (s, 1H, Ar–H) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 35.88, 117.98, 125.11, 127.74, 127.96, 128.74, 129.29, 131.77, 133.19, 135.59, 135.76, 137.50, 139.95, 143.52, 146.76, 149.56, 155.14, 161.32, 164.82 ppm.
2-Benzylthio-4-chloro-N-(4-chlorobenzoyl)-5-(1,3,4-oxadiazol-2-yl)benzenesulfonamide (4i, C22H15Cl2N3O4S2)
To a solution of 0.172 g 4-chlorobenzoic acid (1.1 mmol) in 5 cm3 dry MeCN, 0.227 g DCC (1.1 mmol) was added and stirred at room temperature for 5 min. 2a (0.382 g, 1 mmol) and 0.184 g DMAP (1.5 mmol) were added and stirred at room temperature for 72 h. By-products were filtered out and washed thoroughly with MeCN. The filtrate was concentrated under reduced pressure to dryness. MeOH (2 cm3) was added, and the obtained mixture was slowly acidified with 5 M hydrochloric acid. The formed precipitate was filtered off and washed with EtOH and water. The crude product was purified by crystallization from EtOH. Yield: 0.292 g (56%); m.p.: 275–277 °C; R f = 0.25 (benzene/EtOH = 4:1); IR (KBr):\( \bar{\nu } \) = 3,162, 3,080, 2,929, 2,854, 1,698, 1,592, 1,531, 1,492, 1,462, 1,348, 1,168 cm−1; 1H NMR (500 MHz, DMSO-d 6 ): \( \delta \) = 4.56 (s, 2H, SCH2), 7.14–7.21 (m, 3H, Ar–H), 7.32–7.36 (m, 2H, Ar–H), 7.57–7.62 (m, 2H, H-3 and Ar–H), 7.88–7.95 (m, 3H, Ar–H), 8.57 (s, 1H, H-6), 9.48 (s, 1H, Ar–H) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 35.99, 118.53, 127.90, 128.80, 128.99, 129.36, 129.51, 130.41, 130.80, 134.00, 134.79, 135.39, 136.95, 138.61, 143.69, 155.24, 161.03, 164.52 ppm.
2-Benzylthio-4-chloro-5-(1,3,4-oxadiazol-2-yl)-N-(3,4,5-trimethoxybenzoyl)benzenesulfonamide (4j, C25H22ClN3O7S2)
To a suspension of 0.233 g 3,4,5-trimethoxybenzoic acid (1.1 mmol) in 5 cm3 dry MeCN, 0.227 g DCC (1.1 mmol) was added and stirred at room temperature for 5 min. 2a (0.382 g, 1 mmol) and 0.184 g DMAP (1.5 mmol) were added and stirred at room temperature for 20 h. The precipitate was filtered off and suspended in 5 cm3 EtOH, acidified with 2 cm3 10% p-TSA/EtOH, and stirred under cooling (ice bath) for 5 min. The crude product was filtered off and purified by crystallization from EtOH. Yield: 0.366 g (64%); m.p.: 245–247 °C; R f = 0.29 (benzene/EtOH = 4:1); IR (KBr):\( \bar{\nu } \) = 3,442, 3,158, 3,092, 2,962, 2,931, 2,841, 1,697, 1,595, 1,526, 1,511, 1,460, 1,331, 1,162 cm−1; 1H NMR (200 MHz, DMSO-d 6 ): \( \delta \) = 3.73 (s, 3H, OCH3), 3.78 (s, 6H, 2OCH3), 4.56 (s, 2H, SCH2), 7.16–7.36 (m, 7H, Ar–H), 7.90 (s, 1H, H-3), 8.59 (s, 1H, H-6), 9.49 (s, 1H, Ar–H) ppm; 13C NMR (50 MHz, DMSO-d 6 ): \( \delta \) = 36.01, 56.38, 60.45, 106.49, 118.49, 125.99, 127.87, 128.74, 129.39, 134.16, 134.79, 135.32, 136.94, 142.05, 143.73, 152.93, 155.25, 161.05, 164.81 ppm.
NCI in vitro anticancer screen
As of early 2007 all compounds submitted to the NCI-60 cell screen are tested initially at a single high dose (10 μM) in the full NCI-60 cell panel representing human leukemia, melanoma and lung, colon, brain, breast, ovary, kidney, and prostate cancers. Briefly, the compounds were solubilized in DMSO and added at a single concentration, and the cell culture was incubated for 48 h at 37 °C, 5% CO2, 95% air, and 100% relative humidity. End points were determined by colorimetric sulforhodamine B (SRB) assay [40]. Results for each compound were reported as a mean-graph of the percent growth of the treated cells relative to the no-drug control, and relative to the time-zero number of cells. This allows detection of both growth inhibition (values between 0 and 100) and lethality (values less than 0) [41]. According to Developmental Therapeutics Program (DTP) anticancer screening paradigm, after obtaining the results for one-dose assay, careful analysis of DTP screening data was performed and compound 4c (NSC 754633) which satisfied predetermined threshold inhibition criteria was selected for the NCI five-dose (0.01–100 μM) assay. The results were used to create dose–response curves (log10 of sample concentration versus % growth), and three response parameters (GI50, TGI, and LC50) were calculated for each cell line. GI50 measures the growth inhibitory power of the test agent, TGI signifies a cytostatic effect, and LC50 signifies a cytotoxic effect.
References
Negwer M (1994) Organic-chemical drugs and their synonyms. Akademie Verlag, Berlin
Winum JY, Rami M, Scozzafava A, Montero JL, Supuran C (2008) Med Res Rev 28:445
Neri D, Supuran CT (2011) Nat Rev Drug Discov. doi:10.1038/nrd3554
Bouchain G, Delorme D (2003) Curr Med Chem 10:2359
Owa T, Yoshino H, Okauchi T, Okabe T, Ozawa Y, Sugi NH, Yoshimatsu K, Nagasu T, Koyanagi N, Kitoh K (2002) Bioorg Med Chem Lett 12:2097
Scozzafava A, Owa T, Mastrolorenzo A, Supuran CT (2003) Curr Med Chem 10:925
De Clercq E (2004) Int J Biochem Cell Biol 36:1800
Sławiński J (2003) Eur J Med Chem 39:179
Sławiński J, Brożewicz K, Fruziński A, Główka ML (2011) Heterocycles 83:1093
Sławiński J, Bednarski P, Reszka P (2004) Polish J Chem 39:179
Sławiński J, Gdaniec M (2005) Eur J Med Chem 40:377
Sławiński J, Brzozowski Z (2006) Eur J Med Chem 41:1180
Brzozowski Z, Sączewski F, Sławiński J, Bednarski PJ, Grünert R, Gdaniec M (2007) Bioorg Med Chem 15:2560
Kuo CL, Assefa H, Kamath S, Brzozowski Z, Sławiński J, Sączewski F, Buolamwini JK, Neamati N (2004) J Med Chem 47:385
Brzozowski Z, Sławiński J, Sączewski F, Sanchez T, Neamati N (2008) Eur J Med Chem 43:1188
Brzozowski Z, Sączewski F, Sławiński J, Sanchez T, Neamati N (2009) Eur J Med Chem 44:190
Sławiński J, Żołnowska B, Pirska D, Kędzia A, Kwapisz E (2011) J Enzym Inhib Med Chem. doi:10.3109/14756366.2011.625024
Sączewski F, Innocenti A, Brzozowski Z, Sławiński J, Pomarnacka E, Kornicka A, Scozzafava A, Supuran CT (2006) J Enzym Inhib Med Chem 21:563
Sączewski F, Sławiński J, Kornicka A, Brzozowski Z, Pomarnacka E, Innocenti A, Scozzafava A, Supuran CT (2006) Bioorg Med Chem Lett 16:4846
Neamati N, Mazumder A, Sunder S, Owen JM, Schultz RJ, Pommier Y (1997) Antivir Chem Chemother 8:485
Kuo CL, Assefa H, Kamath S, Brzozowski Z, Sławiński J, Sączewski F, Buolamwini JK, Neamati N (2004) J Med Chem 47:385
Corbett TH, White K, Polin L, Kushner J, Paluch J, Shih C, Grossman CS (2003) Investig New Drug 21:33
Kirkwood JM, Gonzalez R, Reintgen D, Clingan PR, McWilliams RR, De Alwis DP, Zimmermann A, Brown MP, Ilaria RL Jr, Millward MJ (2011) Cancer. doi:10.1002/cncr.26068
Dömling A, Antuch W, Beck B, Schauer-Vukašinović V (2008) Bioorg Med Chem Lett 18:4115
Ackler S, Mitten MJ, Foster K, Oleksijew A, Refici M, Tahir SK, Xiao Y, Tse C, Frost DJ, Fesik SW, Rosenberg SH, Elmore SW, Shoemaker AR (2010) Cancer Chemother Pharmacol 66:869
Lobb KL, Hipskind PA, Aikins JA, Alvarez E, Cheung YY, Considine EL, De Dios A, Durst GL, Ferritto R, Grossman CS, Giera DD, Hollister BA, Huang Z, Iversen PW, Law KL, Li T, Lin HS, Lopez B, Lopez JE, Cabrejas LMM, McCann DJ, Molero V, Reilly JE, Richett ME, Shih C, Teicher B, Wikel JH, White WT, Mader MM (2004) J Med Chem 47:5367
Brzozowski Z, Sławiński J (1984) Acta Pol Pharm 41:5
Novello FC, Jones JH (1965) Belgium Patent 669,534; (1965) Chem Abstr 65:5467
Goralski CT, Pews RG, Burk GA (1997) US Patent 4,041,073; (1997) Chem Abstr 87:151851
Szczepanski H, Meyer W, Weibel F (1991) Eur Patent 420,815; (1991) Chem Abstr 115:71151
Pomarnacka E, Angielski S, Hoppe A (1984) Acta Pol Pharm 41:141
Sturino CF, Labelle M (1998) Tetrahedron Lett 39:5891
Donkor IO, Abdel-Ghany YS, Kador PF, Mizoguchi T, Bartoszko-Malik A, Miller DD (1998) Eur J Med Chem 33:15
Matassa VG, Maduskuie TP Jr, Shapiro HS, Hesp B, Snyder DW, Aharony D, Krell RD, Keith RA (1990) J Med Chem 33:1781
BioByte Corp., Claremont, CA, USA (2005), CLogP v5.01; www.biobyte.com
Alvarez M, Paull K, Monks A, Hose C, Lee JS, Weinstein J, Grever M, Bates S, Fojo T (1995) J Clin Invest 95:2205
Lee JS, Paull K, Alvarez M, Hose C, Monks A, Grever M, Fojo AT, Bates SE (1994) Mol Pharmacol 46:627
Weinstein JN, Myers TG, O’Connor PM, Friend SH, Fornace AJ Jr, Kohn KW, Fojo T, Bates SE, Rubinstein LV, Anderson NL, Buolamwini JK, Van Osdol WW, Monks AP, Scudiero DA, Sausville EA, Zaharevitz DW, Bunow B, Viswanadhan VN, Johnson GS, Wittes RE, Paull KD (1997) Science 275:343
Paull KD, Hamel E, Malspeis L (1995) Cancer chemotherapeutic agents. Oxford University Press, Washington DC
Skehan P, Storeng R, Scudiero D, Monks A, McMahon J, Vistica D, Warren JT, Bokesch H, Kenney S, Boyd MR (1990) J Natl Cancer Inst 82:1107
Paull KD, Shoemaker RH, Hodes L, Monks A, Scudiero DA, Rubinstein L, Plowman J, Boyd MR (1989) J Natl Cancer Inst 81:1088
Acknowledgments
The authors are very grateful to Dr. Joel Morris, Chief of Drug Synthesis and Chemistry Branch (DSCB), National Cancer Institute (Bethesda, MD) for the in vitro screening.
Open Access
This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License (https://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Brożewicz, K., Sławiński, J. Synthesis and in vitro activity of novel 2-(benzylthio)-4-chloro-5-(1,3,4-oxadiazol-2-yl)benzenesulfonamide derivatives. Monatsh Chem 143, 975–984 (2012). https://doi.org/10.1007/s00706-012-0732-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00706-012-0732-6