Abstract
A general methodology for the dynamic modeling and analysis of planar flexible deployable structures consisting of scissor-like elements (SLEs) is presented. This modeling method is based on a comprehensive consideration of the symmetry and array characteristics of deployable structure and on an improved absolute node coordinate formulation (ANCF), which can model the warping of beam section using the locking-free shear deformable beam element. An effective node separation method is proposed to reduce the number of degrees of freedom of the dynamic equation in the ANCF framework, eliminate the constraint equations within and between SLEs and obtain a compact matrix. This reduction method has good adaptability and can be extended to all kinds of scissor deployable structures with array characteristics, whether they are planar or spatial structures. In addition, the modified generalized \(\alpha\) method is utilized to solve the motion equations of deployable structure and eliminate the false high-frequency response generated in the calculation process. Finally, the methodology is validated using a cantilever beam case, and the parametric dynamic response of 2 × 2 and 1 × 2 deployable structures is implemented in this paper. The obtained results show that flexibility has an important impact on the dynamic characteristics of large deployable structures, and the deployable structure is unstable near \(0^{ \circ }\) and \(90^{ \circ }\), and its safe working angle is \(17^{ \circ }\)–\(75^{ \circ }\). It is necessary to carry out parametric research on this structures in the design stage because the prediction of these parameters such as initial configuration and component materials can improve the stability and deployment accuracy of deployable structures in orbit.
Similar content being viewed by others
References
Cai, J.G., Deng, X.W., Zhang, Y.T., et al.: Folding behavior of a foldable prismatic mast with kresling origami pattern. J. Mech. Robot. 8(3), JMR-15-1160 (2016)
Jin, Y.L., Liu, T., Lyu, R.X., et al.: Theoretical analysis and experimental investigation on buckling of FAST Mast deployable structures. Int. J. Struct. Stab. Dyn. 15(5), 1450075 (2015)
Cai, J., Deng, X., Xu, Y., et al.: Geometry and motion analysis of origami-based deployable shelter structures. J. Struct. Eng. 141(10), 06015001 (2015)
Otsuka, K., Makihara, K.: Absolute nodal coordinate beam element for modeling flexible and deployable aerospace structures. AIAA J. 57(3), 1343–1346 (2019)
Li, Y.Y., Wang, C., Huang, W.H.: Dynamics analysis of planar rigid-flexible coupling deployable solar array system with multiple revolute clearance joints. Mech. Syst. Signal Process. 117, 188–209 (2019)
Wu, C., Viquerat, A.: Computational and experimental study on dynamic instability of extended bistable carbon/epoxy booms subjected to bending. Compos. Struct. 188(Mar.), 347–355 (2018)
You, B.D., Liang, D., Hao, P.B., et al.: Deployment dynamical behavior of planetary rover mast mechanism considering geometric nonlinearity and laminated structure characteristics. Arch. Appl. Mech. 3, 1605–1623 (2020)
Neto, M.A., Ambrósio, J.A.C., Leal, R.P.: Composite materials in flexible multibody systems. Compos. Methods Appl. Mech. Eng. 195, 6860–6873 (2006)
Zhang, Y.Q., Duan, B.Y., Li, T.J.: A controlled deployment method for flexible deployable space antennas. Acta Astronaut. 81(1), 19–29 (2012)
Shabana, A.A.: Flexible multibody dynamics: review of past and recent developments. Multibody Syst. Dyn. 1(2), 189–222 (1997)
Peng, Q.A., Wang, S.M., Li, B., et al.: Dynamics analysis of deployable structures considering a two-dimensional coupled thermo-structural effect. Int. J. Aerosp. Eng. 2018, 1752815 (2018)
Li, T., Wang, Y.: Deployment dynamic analysis of deployable antennas considering thermal effect. Aerosp. Sci. Technol. 13(4–5), 210–215 (2009)
Orzechowski, G.: Analysis of beam elements of circular cross section using the absolute nodal coordinate formulation. Arch. Mech. Eng. 59(3), 283–296 (2012)
Khude, N.N.: Efficient simulation of flexible body systems with frictional contact/impact. Dissertations and theses, Gradworks (2015)
Dmitrochenko, O.N., Pogorelov, D.Y.: Generalization of plate finite elements for absolute nodal coordinate formulation. Multibody Syst. Dyn. 10(1), 17–43 (2003)
Kübler, L., Eberhard, P., Geisler, J.: Flexible multibody systems with large deformations using absolute nodal coordinates for isoparametric solid brick elements. In: ASME 2003 international design engineering technical conferences and computers and in-formation in engineering conference, pp. 31–52 (2003)
Pappalardo, C.M., Zhang, Z.G., Shabana, A.A.: Use of independent volume parameters in the development of new large displacement ANCF triangular plate/shell elements. Nonlinear Dyn. 91, 2171–2202 (2018)
Pappalardo, C.M., Wang, T., Shabana, A.A.: On the formulation of the planar ANCF triangular finite elements. Nonlinear Dyn. 89, 1019–1045 (2017)
Karin, N., Peter, G., Johannes, G.: Structural and continuum mechanics approaches for a 3D shear deformable ANCF beam finite element: application to static and linearized dynamic examples. J. Comput. Nonlinear Dyn. 8(2), 92–110 (2013)
Hussein, B.A., Sugiyama, H., Shabana, A.A.: Coupled deformation modes in the large deformation finite element analysis: problem definition. ASME J. Comput. Nonlinear Dyn. 2, 146–154 (2007)
Schwab, A.L., Meijaard, J.P.: Comparison of three-dimensional beam elements for dynamic analysis: finite element method and absolute nodal coordinate formulation. In: Proceedings of the ASME 2005 International Design Engineering Technical Conferences and Computer and Information in Engineering Conference (DETC2005–85104), pp. 24–28. Long Beach (2005).
Nachbagauer, K., Pechstein, A.S., Irschik, H., et al.: A new locking-free formulation for planar, shear deformable, linear and quadratic beam finite elements based on the absolute nodal coordinate formulation. Multibody Syst. Dyn. 26(3), 245–263 (2011)
Nachbagauer, K., Gruber, P., Gerstmayr, J.: A 3D shear deformable finite element based on the absolute nodal coordinate formulation. Multibody dynamics. Comput. Methods Appl. Sci. 28, 77–96 (2013)
Dufva, K., Sopanen, J., Mikkola, A., et al.: A two-dimensional shear deformable beam element based on the absolute nodal coordinate formulation. J. Sound Vib. 280(3), 719–738 (2005)
Gantes, C.: Analytical predictions of the snap-through characteristics of deployable structures. Trans. Built Environ. 21, 83–92 (1996)
Gantes, C., Konitopoulou, E.: Geometric design of arbitrarily curved bi-stable deployable arches with discrete joint size. Int. J. Solids Struct. 41, 5517–5540 (2004)
Chen, Y., You, Z., Tarnai, T.: Threefold-symmetric Bricard linkages for deployable structures. Int. J. Solids Struct. 42(8), 2287–2301 (2005)
Li, Y.Y., Wang, Z.L., Wang, C., et al.: Planar rigid-flexible coupling spacecraft modeling and control considering solar array deployment and joint clearance. Acta Astronaut. 142, 138–151 (2018)
Li, Y.Y., Wang, C., Huang, W.H.: Rigid-flexible-thermal analysis of planar composite solar array with clearance joint considering torsional spring, latch mechanism and attitude controller. Nonlinear Dyn. 96, 2031–2053 (2019)
Otsuka, K., Makihara, K.: ANCF-ICE beam element for modeling highly flexible and deployable aerospace structures. In: AIAA Scitech 2019 Forum, 2019, San Diego, California
Liu, C., Tian, Q., Yan, D., et al.: Dynamic analysis of membrane systems undergoing overall motions, large deformations and wrinkles via thin shell elements of ANCF. Comput. Methods Appl. Mech. Eng. 258, 81–95 (2013)
Floreano, D., Wood, R.J.: Science, technology and the future of small autonomous drones. Nature 521(7553), 460–466 (2015)
Hachem, C., Hanaor, A., Karni, E.: Evaluation of biological deployable systems. Int. J. Space Struct. 20(4), 189–200 (2005)
Lederman, G., Zhong, Y., Glišić, B.: A novel deployable tied arch bridge. Eng. Struct. 70(3), 1–10 (2014)
Hu, H.Y., Tian, Q., Zhang, W., et al.: Nonlinear dynamics and control of large deployable space structures composed of trusses and meshed. Adv. Mech. 43, 390–414 (2013)
Li, B., Wang, S.M., Zhi, C.J., et al.: Analytical and numerical study of the buckling of planar linear array deployable structures based on scissor-like element under its own weight. Mech. Syst. Signal Process. 83, 474–488 (2017)
Li, B., Wang, S.M., Tan, U.-X.: Buckling analysis of planar linear uniform deployable structures consisting of scissor-like element in space under compression. Sci China Technol. Sci. (2020). https://doi.org/10.1007/s11431-020-1569-6
Friedman, N.: Investigation of highly flexible, deployable structures: review, modelling, control, experiments and application. In: Budapest University of Technology and Economics (BME). Budapest: Hungary (2012)
Li, B., Wang, S.M., Yuan, R., et al. Dynamic characteristics of planar linear array deployable structure based on scissor-like element with joint clearance using a new mixed contact force model. In: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1989–1996, pp. 203–210, 0954406215607903 (2016)
Li, B., Wang, S.M., Makis, V., et al.: Dynamic characteristics of planar linear array deployable structure based on scissor-like element with differently located revolute clearance joints. In: Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1989–1996, pp. 203–210, 095440621771027 (2017)
Sun, Y., Wang, S., Li, J., et al.: Mobility analysis of the deployable structure of SLE based on screw theory. Chin. J. Mech. Eng. 26(4), 793–800 (2013)
Yildiz, K., Lesieutre, G.A.: Effective beam stiffness properties of n-strut cylindrical tensegrity towers. AIAA J. 57(5), 2185–2194 (2019)
Peng, Q.A., Wang, S.M., Zhi, C., et al.: A new flexible multibody dynamics analysis methodology of deployable structures with scissor-like elements. Chin. J. Mech. Eng. 32(1), 1–10 (2019)
Peng, Q.A., Wang, S.M., Li, B., et al.: A novel thermo-flexible coupled dynamics analysis method of planar deployable structures in the deploying process. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 1989–1996 233(17), 6089–6098 (2019)
Omar, M.A., Shabana, A.A.: A two-dimensional shear deformable bear for large rotation and deformation problems. J. Sound Vib. 243(3), 565–576 (2001)
Daniel, G.-V., Mikkola, A.M., Escalona, J.L.: A new locking-free shear deformable finite element based on absolute nodal coordinates. Nonlinear Dyn. 50(1–2), 249–264 (2007)
Shabana, A.A., Yakoub, R.Y.: Three dimensional absolute nodal coordinate formulation for beam elements: theory. J. Mech. Des. 123(4), 614–621 (2001)
Yakoub, R.Y., Shabana, A.A.: Three dimensional absolute nodal coordinate formulation for beam elements: implementation and applications. J. Mech. Des. 123(4), 614–621 (2001)
Shabana, A.A.: Coupling between shear and bending in the analysis of beam problems: planar case. J. Sound Vib. 419, 510–525 (2018)
Wang, W.T.: Modeling and Analysis of the Double-Link Flexible Manipulator Based on the Absolute Nodal Coordinate Formulation. X’ian University of Technology, X’ian (2015)
Tian, Q., Flores, P., Lankarani, H.M.: A comprehensive survey of the analytical, numerical and experimental methodologies for dynamics of multibody mechanical systems with clearance or imperfect joints. Mech. Mach. Theory 122, 1–57 (2018)
Cavalieri, F.J., Cardona, A.: Non-smooth model of a frictionless and dry three-dimensional revolute joint with clearance for multibody system dynamics. Mech. Mach. Theory 121, 335–354 (2018)
Li, Y., Luo, Z., Liu, Z., et al.: Nonlinear dynamic behaviors of a bolted joint rotor system supported by ball bearings. Arch. Appl. Mech. 89(7), 2381–2395 (2019)
Askari, E., Flores, P.: Coupling multi-body dynamics and fluid dynamics to model lubricated spherical joints. Arch. Appl. Mech. 90(3), 2091–2111 (2020)
Acknowledgements
The authors gratefully acknowledge the financial support of the National Natural Science Foundation of China (Grant No. 51175422) and Natural Science Basic Research Plan in Shaanxi Province of China (Program No. 2019JQ-753).
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare that there is no conflict of interests regarding the publication of this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Li, B., Duan, C., Peng, Q. et al. Parametric study of planar flexible deployable structures consisting of Scissor-like elements using a novel multibody dynamic analysis methodology. Arch Appl Mech 91, 4517–4537 (2021). https://doi.org/10.1007/s00419-021-01997-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00419-021-01997-z