Abstract
Proof-of-concept laboratory experiments demonstrated grafting diacetone acrylamide (DAAM) onto natural rubber (NR) latex particles and crosslinking these sites via the keto-hydrazide reaction. Graft copolymers of NR and PDAAM (NR-g-PDAAM) were prepared by seeded emulsion polymerization at 50 °C. The morphology of the obtained graft copolymers was characterized by transmission electron microscopy. The degree of grafting of poly(diacetone acrylamide), PDAAM, phase in NR-g-PDAAM was evaluated by 1H NMR technique. The keto-hydrazide crosslinking reaction of the ketone carbonyl of grafted PDAAM with adipic acid dihydrazide (ADH) was initially investigated using attenuated total reflection Fourier transform infrared (ATR-FTIR). The FTIR spectra of the NR-g-PDAAM film with added ADH lacked the absorption peak of ketone carbonyl in PDAAM. This result is consistent with the observations that the tensile strength of the cast films with ADH was higher than those without ADH, corroborating that the crosslinking reaction was taking place in the cast NR-g-PDAAM latex film. Then, the adhesive performance of NR-g-PDAAM latexes with various DAAM contents was determined, using ADH as the crosslinking agent. The lap shear strength increased noticeably with the amount of DAAM in the latex adhesives. This is attributed to the crosslinking in the adhesive film increasing with DAAM content and giving correspondingly improved cohesive strength. The effect of tackifier (i.e., gum rosin) content on the shear strength of NR-g-PDAAM latex adhesive was subsequently investigated. Adhesion tests indicated that the optimal gum rosin loading was 50 phr for attaining the maximum shear strength.
Similar content being viewed by others
References
De Sadhan K (2003) Natural rubber-based adhesives. In: Pizzi A, Mittal KL (eds) Handbook of adhesive technology, revised and expanded, 2nd edn. Marcel Dekker Inc, New York, pp 511–514
Edward MP (2000) Handbook of adhesives and sealants. The Mc Graw-hill companies Inc, New York, p 395
Coran AY (2005) Vulcanization. In: Mark JE, Erman B, Eirich FR (eds) Science and technology of rubber, 3rd edn. Elsevier Inc, Burlington, pp 331–349
Kessel N, Illsley DR, Keddie JL (2008) The diacetone acrylamide crossliking reaction and its influence on the film formation of an acrylic latex. J Coat Tech Res 3:285–297
Foster AB, Lovell PA, Rabjohns MA (2009) Control of properties through structured particle design of water-born pressure-sensitive adhesives. Polymer 50:654–1670
Zhang X, Liu Y, Huang H, Li Y, Chen H (2012) The diacetone acrylamide crosslinking reaction and its control of core-shell polyacrylate lattices at ambient temperature. J Appl Polym Sci 123:1822–1832
Tale NV, Jagtap RN (2010) Synthesis of diacetone acrylamide monomer andthe film properties of its copolymers. Iran Polym J 19:801–810
Coleman LE, Bork JF, Wyman DP, Hoke DI (1965) Synthesis and polymerization of N[2-(2-methyl-4-oxopentyl)]-acrylamide-a new reactive vinyl monomer. J Appl Polym Sci Part A: Polym Chem 3:1601–1608
Thongnuanchan B, Nokkaew K, Kaesaman A, Nakason C (2007) Epoxidized natural rubber-bonded para rubber wood particleboard. Polym Eng Sci 47:421–428
Kangwansupamonkon W, Gilbert RG, Kiatkamjornwong S (2005) Modification of natural rubber by grafting with hydrophilic vinyl monomers. Macromol Chem Phys 206:2450–2460
Kochthongrasamee T, Prasassarakich P, Kiatkamjornwong S (2006) Effects of redox initiator on graft copolymerization of methyl methacrylate onto natural rubber. J Appl Polym Sci 101:2587–2601
Arayapranee W, Prasassarakich P, Rempel GL (2002) Synthesis of graft copolymers from natural rubber using cumene hydroperoxide redox initiator. J Appl Polym Sci 83:2993–3001
Oliveira PC, Guimara˜es A, Cavaille´ J-Y, Chazeau L, Gilbert RG, Santos AM (2005) Poly(dimethylaminoethyl methacrylate) grafted natural rubber from seeded emulsion polymerization. Polymer 46:1105–1111
Lamb DJ, Anstey JF, Fellows CM, Monteiro MJ, Gilbert RG (2001) Modification of natural rubber and artificial polymer colloids by topology-controlled emulsion polymerization. Biomacromolecules 2:518–525
Ellis B, Welding GN (1964) Estimation, from swelling, of the structural contribution of chemical reactions to the vulcanization of natural rubber Part I. General method. Rubber Chem Technol 37:563–570
Flory PJ, Rehener J (1943) Statistical mechanics of crosslinked polymer networks II. Swelling. J Chem Phys 11:521–526
Martín-Martínez JM (2002) Rubber base adhesives. In: Chaudhary M, Pocius AV (eds) Adhesion science and engineering-2 surfaces, chemistry and applications. Elsevier science BV, Amsterdam, pp 598–603
Everaerts AI, Clemens LM (2002) Pressure sensitive adhesives. In: Chaudhary M, Pocius AV (eds) Adhesion science and engineering-2 surfaces, chemistry and applications. Elsevier science BV, Amsterdam, p 476
Poh BT, Yee KW, Lim HB (2008) Viscosity and shear strength of natural-rubber-based adhesives in the presence of gum rosin and petroresin. J Appl Polym Sci 110:4079–4083
Azura AR, Lee XM, Misman MA (2013) Effect of natural and synthetic tackifiers on viscosities, adhesion properties and thermal stability of SNR and DPNR solution adhesives. J Adhes Sci Technol 28:637–652
Acknowledgments
This work was supported by the Higher Education Research Promotion and National Research University Project of Thailand, Office of the Higher Education Commission. The authors would like to thank the Research and Development Office (RDO) and Assoc. Prof. Seppo Karrila for editing this article.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Thongnuanchan, B., Ninjan, R., Kaesaman, A. et al. A novel method to crosslink natural rubber latex adhesive at ambient temperature. Polym. Bull. 72, 135–155 (2015). https://doi.org/10.1007/s00289-014-1264-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00289-014-1264-5