Abstract
With some attention to temperature calibration but no other special precautions the temperatures of both solid-solid and melting transitions can be determined to within a few tenths of a Kelvin of absolute values in a range of heat-flux and power-compensation DSC instruments. Materials showing several solid-solid transitions are potentially useful multiple calibrants but require some work to define appropriate thermal treatments that lead to reproducible behaviour.
Zusammenfassung
Unter Beachtung der Temperaturkalibrierung, jedoch ohne jegliche andere Vorkehrungen können in einer Reihe von Wärmefluß- und Leistungskompensations- DSC-Geräten sowohl die Temperaturen von Feststoff-Feststoff-Umwandlungen als auch von Schmelzvorgängen innerhalb einiger Zehntel Kelvin (absolut) bestimmt werden. Substanzen mit mehreren Feststoff-Feststoff-Umwandlungen sind potentiell anwendbare Mehrfach-Kalibrierstoffe, bedürfen jedoch einiger Arbeit zur Festlegung entsprechender thermischer Behandlunge, um ein reproduzierbares Verhalten zu erreichen.
Similar content being viewed by others
References
P. D. Garn and O. Menis, Thermochim. Acta, 42 (1980) 125.
H. G. McAdie, P. D. Garn and O. Menis, ‘Selection of Differential Thermal Analysis Temperature Standards through a Cooperative Study (SRM 758, 759, 760)’ NBS Special Publication 260-40, National Bureau of Standards, Washington DC 1972.
G. W. H. Höhne, H. K. Cammenga, W. Eysel, E. Gmelin and W. Hemminger, Thermochim. Acta, 160 (1990) 1.
Y. A. Badr and S. Awad, J. Phys. Chem. Solids, 45 (19840 351.
C. N. R. Rao, B. Prakash and M. Natarajan, ‘Crystal Structure Transformation in Inorganic Nitrites, Nitrates and Carbonates’, NSRDS-NBS 53, National Bureau of Standards, Washington, DC, 1975.
K. H. Stern, J. Phys. Chem. Ref. Data, 1 (1972) 747.
J. D. Menczel and T. M. Leslie, Proc. of 10th ICTA Congress Vol. 3, 1993, p. 957.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Charsley, E.L., Davies, J.P., Glöggler, E. et al. Sub-ambient and medium temperature calibration. Journal of Thermal Analysis 40, 1405–1414 (1993). https://doi.org/10.1007/BF02546904
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02546904