Skip to main content
Log in

Process engineering investigations of penicillin production

  • Biotechnology
  • Published:
European journal of applied microbiology and biotechnology Aims and scope Submit manuscript

Summary

As part of a project on the production of penicillin, the penicillin production of two strains of Penicillium chrysogenum which have a different penicillin productivity was investigated in bubble column bioreactors and for comparison in stirred fermenters. The main interest of this study were the complicated interrelations between the stirrer speed, the stirrer type, the shear stress, the morphology of the mycelium and broth viscosity as well as the effect of the oxygen transfer behavior on antibiotic productivity.

Stirred tank reactors with different turbine stirrers as well as with a draught tube and propeller were employed.

The main variable investigated was the stirrer speed. At low stirrer speeds, gas dispersion is inadequate and the insufficient oxygen transfer rate is a limiting factor. At higher stirrer speeds, the oxygen supply of pulpy mycelia is improved and more cell mass is formed. This result is the same for both strains in all three reactors.

If the oxygen partial pressure is near the lower cirtical value, a high percentage of the carbon source is converted into penicillin but the penicillin productivity is low due to a low percentage of penicillin producing cells. At oxygen partial pressures just above 8% saturation, the absolute penicillin productivity is maximal. At higher stirrer speeds and dissolved oxygen concentrations the penicillin production phase is shorter, cell growth is higher and a higher percentage of the carbon source is converted into CO2.

In reactors with a draught tube and propeller, a lower productivity is attained than in those with turbine stirrers.

The behavior of the two strains is fairly similar. The higher producing strain, however, has a more distinct separation between its periods of growth and production than does the low producing one. At high stirrer speeds the increase in the cell growth rate is less significant and the substrate yield coefficients are higher for the high producing strain than for the low producing one.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

Abbreviations

C:

Dissolved oxygen concentration (mg l−1)

C* :

C at saturation (mg l−1)

kLa:

Volumetric mass transfer coefficient (h−1)

OTR:

Oxygen transfer rate (mg l−1 h−1)

OUR:

Oxygen uptake rate (mg l−1 h−1)

rpm:

Impeller speed (min−1)

X:

(Dry) biomass concentration (g kg−1)

Vg :

Volumetric gas flow rate (Nl min−1)

CMC:

Carboxymethyl cellulose

References

  • Bauermeister GD (1978) Patent P28.01233.9-52 Elektrodenanordnung

  • Cooney CL (1979) Conversion yield in penicillin production: Theory vs. Practice. Process Biochem, May, p 31

  • Cooney CL, Acevedo F (1977) Theoretical conversion yields for penicillin synthesis. Biotechn Bioeng 19:1449

    Google Scholar 

  • Giona AR, Marelli L, Toro L, Santis de R (1976) Kinetic analysis of penicillin production by semicontinuous fermenters. Biotechn Bioeng 18:473

    Google Scholar 

  • Heijnen JJ, Roels JA, Stouthamer AH (1979) Application of balancing methods in the penicillin fermentation. Biotechn Bioeng 21:2175

    Google Scholar 

  • König B, Lippert J, Schügerl K (1979) A steady state method for the determination of kLa values in stirred tank reactors. Oxygen transfer rate in model fermentation media with high speed tube stirrer. Ger Chem Eng 2:371

    Google Scholar 

  • König B (1980) Untersuchungen zur Penicillinproduktion in Blasensäulen. Dissertation, University of Hannover

  • Mason HRS, Righelato RC (1976) Energetics of fungal growth: The effect of growth-limiting substrate on respiration of penicillin chrysogenum. J Appl Chem Biotechnol 26:145

    Google Scholar 

  • Metz B, Kossen NWF, Sujdam von IC (1979) The rheology of mould suspensions. Ghose TK, Fiechter A, Blakebrough N (eds) Advances in biochemical vol. 11 energineous Springer, Berlin Heidelberg Blackwell New York 104

    Google Scholar 

  • Pirt SJ (1975) Principles of microbe and cell cultivation. Blackwell New York. Scientific Publications. Oxford

    Google Scholar 

  • Quicker G, Schumpe A, König B, Deckwer W-D (1981) Comparison of measured and calculated oxygen solubilities in fermentation media. Biotechn Bioeng. 23:635

    Google Scholar 

  • Ryu DDY, Hospodka J (1980) Quantitative physiology of penicillin chrysogenum in Penicillin fermentation. Biotechnol Bioeng 22:289

    Google Scholar 

  • Sittig W, Heine H (1977) Forderungen von Betrieb und Praxis an die Ausrüstung biotechnologischer Anlagen. Verfahrenstechnik 7:400

    Google Scholar 

  • Wittler R (1980) Untersuchungen zur Verbesserung der Penicillin-produktion durch Entwicklung und Anpassung analytischer Verfahren. Diplomarbeit, University of Hannover

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

König, B., Seewald, C. & Schügerl, K. Process engineering investigations of penicillin production. European J. Appl. Microbiol. Biotechnol. 12, 205–211 (1981). https://doi.org/10.1007/BF00499488

Download citation

  • Received:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF00499488

Keywords

Navigation