Abstract
Oxidation of the Cr20Mn20Fe20Co20Ni20 (at%) high-entropy alloy (HEA) was investigated at 500–900 °C in laboratory air. At 600 °C the oxide was mainly Mn2O3 with a thin inner Cr2O3 layer; at 700 and 800 °C it was mainly Mn2O3 with some Cr enrichment; at 900 °C it was Mn3O4. The oxidation rate was initially linear but became parabolic at longer times with an activation energy of 130 kJ/mol, comparable to that of Mn diffusion in Mn oxides but much lower than that for sluggish diffusion of Mn in the HEA. The diffusion of Mn through the oxide is considered to be the rate-limiting process.
Similar content being viewed by others
References
K. Y. Tsai, M. H. Tsai, and J. W. Yeh, Acta Materialia 61, 4887 (2013). doi:10.1016/j.actamat.2013.04.058.
J. Y. He, C. Zhu, D. Q. Zhou, W. H. Liu, T. G. Nieh, and Z. P. Lu, Intermetallics 55, 9 (2014). doi:10.1016/j.intermet.2014.06.015.
O. N. Senkov, S. V. Senkova, D. M. Dimiduk, C. Woodward, and D. B. Miracle, Journal of Materials Science 47, 6522 (2012). doi:10.1007/s10853-012-6582-0.
P. K. Huang, J. W. Yeh, T. T. Shun, and S. K. Chen, Advanced Engineering Materials 6, 74 (2004). doi:10.1002/adem.200300507.
C. M. Liu, H. M. Wang, S. Q. Zhang, H. B. Tang, and A. L. Zhang, Journal of Alloys and Compounds 583, 162 (2014). doi:10.1016/j.jallcom.2013.08.102.
B. Gorr, M. Azim, H. J. Christ, T. Mueller, D. Schliephake, and M. Heilmaier, Journal of Alloys and Compounds 624, 270 (2015). doi:10.1016/j.jallcom.2014.11.012.
Y.-X. Liu, C.-Q. Cheng, J.-L. Shang, R. Wang, P. Li, and J. Zhao, Transactions of Nonferrous Metals Society of China 25, 1341 (2015). doi:10.1016/S1003-6326(15)63733-5.
G. Holcomb, J. Tylczak, and C. Carney, JOM 67, 2326 (2015). doi:10.1007/s11837-015-1517-2.
T. M. Butler, J. P. Alfano, R. L. Martens, and M. L. Weaver, JOM 67, 246 (2015). doi:10.1007/s11837-014-1185-7.
Y. Y. Chen, T. Duval, U. D. Hung, J. W. Yeh, and H. C. Shih, Corrosion Science 47, 2257 (2005). doi:10.1016/j.corsci.2004.11.008.
Y. Y. Chen, U. T. Hong, H. C. Shih, J. W. Yeh, and T. Duval, Corrosion Science 47, 2679 (2005). doi:10.1016/j.corsci.2004.09.026.
C. P. Lee, C. C. Chang, Y. Y. Chen, J. W. Yeh, and H. C. Shih, Corrosion Science 50, 2053 (2008). doi:10.1016/j.corsci.2008.04.011.
Y. L. Chou, Y. C. Wang, J. W. Yeh, and H. C. Shih, Corrosion Science 52, 3481 (2010). doi:10.1016/j.corsci.2010.06.025.
Y. L. Chou, J. W. Yeh, and H. C. Shih, Corrosion Science 52, 2571 (2010). doi:10.1016/j.corsci.2010.04.004.
Y.-F. Kao, T.-D. Lee, S.-K. Chen, and Y.-S. Chang, Corrosion Science 52, 1026 (2010). doi:10.1016/j.corsci.2009.11.028.
F. Otto, Y. Yang, H. Bei, and E. P. George, Acta Materialia 61, 2628 (2013). doi:10.1016/j.actamat.2013.01.042.
M. J. Yao, K. G. Pradeep, C. C. Tasan, and D. Raabe, Scripta Materialia 72–73, 5 (2014). doi:10.1016/j.scriptamat.2013.09.030.
F. Otto, N. L. Hanold, and E. P. George, Intermetallics 54, 39 (2014). doi:10.1016/j.intermet.2014.05.014.
A. Haglund, M. Koehler, D. Catoor, E. P. George, and V. Keppens, Intermetallics 58, 62 (2015). doi:10.1016/j.intermet.2014.11.005.
G. Laplanche, P. Gadaud, O. Horst, F. Otto, G. Eggeler, and E. P. George, Journal of Alloys and Compounds 623, 348 (2015). doi:10.1016/j.jallcom.2014.11.061.
G. Laplanche, O. Horst, F. Otto, G. Eggeler, and E. P. George, Journal of Alloys and Compounds 647, 548 (2015). doi:10.1016/j.jallcom.2015.05.129.
D. Ma, M. Yao, K. G. Pradeep, C. C. Tasan, H. Springer, and D. Raabe, Acta Materialia 98, 288 (2015). doi:10.1016/j.actamat.2015.07.030.
Y. Deng, C. C. Tasan, K. G. Pradeep, H. Springer, A. Kostka, and D. Raabe, Acta Materialia 94, 124 (2015). doi:10.1016/j.actamat.2015.04.014.
B. Schuh, F. Mendez-Martin, B. Völker, E. P. George, H. Clemens, R. Pippan, and A. Hohenwarter, Acta Materialia 96, 258 (2015). doi:10.1016/j.actamat.2015.06.025.
M. Laurent-Brocq, A. Akhatova, L. Perrière, S. Chebini, X. Sauvage, E. Leroy, and Y. Champion, Acta Materialia 88, 355 (2015). doi:10.1016/j.actamat.2015.01.068.
G. D. Sathiaraj and P. P. Bhattacharjee, Journal of Alloys and Compounds 637, 267 (2015). doi:10.1016/j.jallcom.2015.02.184.
F. Otto, A. Dlouhý, C. Somsen, H. Bei, G. Eggeler, and E. P. George, Acta Materialia 61, 5743 (2013). doi:10.1016/j.actamat.2013.06.018.
A. Gali and E. P. George, Intermetallics 39, 74 (2013). doi:10.1016/j.intermet.2013.03.018.
N. Stepanov, M. Tikhonovsky, N. Yurchenko, D. Zyabkin, M. Klimova, S. Zherebtsov, A. Efimov and G. Salishchev, Intermetallics 59, 8 (2015). doi:10.1016/j.intermet.2014.12.004.
Z. Wu, H. Bei, G. M. Pharr, and E. P. George, Acta Materialia 81, 428 (2014). doi:10.1016/j.actamat.2014.08.026.
B. Gludovatz, A. Hohenwarter, D. Catoor, E. H. Chang, E. P. George, and R. O. Ritchie, Science 345, 1153 (2014). doi:10.1126/science.1254581.
A. Rist, M.F. Ancey-Moret, C. Gatellier, and P.V. Riboud, Techniques de l’Ingénieur M1730a (1974).
R. K. Wild, Corrosion Science 17, 87 (1977). doi:10.1016/0010-938X(77)90011-7.
F. H. Stott, F. I. Wei, and C. A. Enahoro, Materials and Corrosion 40, 198 (1989). doi:10.1002/maco.19890400403.
A. L. Marasco and D. J. Young, Oxidation of Metals 36, 157 (1991). doi:10.1007/BF00938460.
D. L. Douglass, F. Gesmundo, and C. de Asmundis, Oxidation of Metals 25, 235 (1986). doi:10.1007/BF00655899.
D. L. Douglass and F. Rizzo-Assuncao, Oxidation of Metals 29, 271 (1988). doi:10.1007/BF00751800.
Standard pratice for calibration of temperature scale for thermogravimetry, in: American Society for Testing and Materials, 2014.
P. Kofstad, High temperature corrosion, (Elsevier applied science publishers, New York, 1988).
P. J. Potts, A handbook of silicate rock analysis, (Blackie, Glasgow, 1987).
D. H. Speidel and A. Muan, Journal of the American Ceramic Society 46, 577 (1963).
R. S. Roth, Phase equilibria diagrams (The American Ceramic Society, Westerville, 1995).
A. Petric and H. Ling, Journal of the American Ceramic Society 90, 1515 (2007). doi:10.1111/j.1551-2916.2007.01522.x.
P. R. S. Jackson and G. R. Wallwork, Oxidation of Metals 21, 135 (1984). doi:10.1007/BF00741468.
J.-G. Duh, J. W. Lee, and C.-J. Wang, Journal of Materials Science 23, 2649 (1988). doi:10.1007/BF01111928.
J. G. Duh and C. J. Wang, Journal of Materials Science 25, 268 (1990). doi:10.1007/BF00544219.
J. Y. Liu and S. C. Chang, Corrosion Science 39, 1021 (1997). doi:10.1016/S0010-938X(96)00083-2.
C.-J. Wang and Y.-C. Chang, Materials Chemistry and Physics 76, 151 (2002). doi:10.1016/S0254-0584(01)00515-6.
Z. Wu, H. Bei, F. Otto, G. M. Pharr, and E. P. George, Intermetallics 46, 131 (2014). doi:10.1016/j.intermet.2013.10.024.
O. T. Goncel, D. P. Whittle, and J. Stringer, Corrosion Science 19, 305 (1979). doi:10.1016/0010-938X(79)90023-4.
V. R. Howes and C. N. Richardson, Corrosion Science 9, 385 (1969). doi:10.1016/S0010-938X(69)80034-X.
C. Lowell and D. Deadmore, Oxidation of Metals 7, 55 (1973). doi:10.1007/BF00611984.
D. G. Lees and J. M. Calvert, Corrosion Science 16, 767 (1976). doi:10.1016/0010-938X(76)90008-1.
J. Païdassi and A. Echeverría, Acta Metallurgica 7, 293 (1959). doi:10.1016/0001-6160(59)90024-0.
N. L. Peterson and W. K. Chen, Journal of Physics and Chemistry of Solids 43, 29 (1982). doi:10.1016/0022-3697(82)90170-6.
Acknowledgments
G.L. acknowledges funding by the German Research Foundation through project LA 3607/1-1.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Laplanche, G., Volkert, U.F., Eggeler, G. et al. Oxidation Behavior of the CrMnFeCoNi High-Entropy Alloy. Oxid Met 85, 629–645 (2016). https://doi.org/10.1007/s11085-016-9616-1
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11085-016-9616-1