Abstract
The need for advanced materials has always been desirable in all kinds of industries such as mechanical, aeronautical, civil and automobile. Almost all industries are looking for low-cost materials with better properties. These are the main components that attract every engineer or industrialist to produce an advanced and new material. This requirement may be attained in the form of composite materials. The better mechanical properties and light weight of composite mainly depend upon fabrication method and reinforcement used in the composite. This paper attempts to review the single and hybrid reinforcement used to prepare aluminium MMCs and liquid-phase fabrication method. Various liquid-phase fabrication methods were discussed which is used for the production of Al MMCs but especially put effort on stir casting technique.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Dhingra AK (1986) Metals replacement by composites. JOM 38(3):17–17. https://doi.org/10.1007/bf03257887
Clyne T (2000) An introductory overview of MMC systems, types, and developments. Compreh Com Mater 1–26. https://doi.org/10.1016/b0-08-042993-9/00001-2
Bunsell A (1980) Foreword. Adv Comp Mater 1-2. https://doi.org/10.1016/b978-1-4832-8370-8.50004-8
Diler EA, Ipek R (2013) Main and interaction effects of matrix particle size, reinforcement particle size and volume fraction on wear characteristics of Al–sicp composites using central composite design. Compos B Eng 50:371–380. https://doi.org/10.1016/j.compositesb.2013.02.001
Natrayan L, Senthil Kumar M (2018) Study on squeeze casting of aluminum matrix composites—a review. Adv Manuf Mater Sci 75–83. https://doi.org/10.1007/978-3-319-76276-0_8
Rajesh AM, Kaleemulla M (2016) Experimental investigations on mechanical behavior of aluminium metal matrix composites. IOP Conf Ser Mater Sci Eng 149:012121. https://doi.org/10.1088/1757-899x/149/1/012121
Daniel Silas Kumar M, Jagadamba P, Srikiran S, Pujari S (2019) Mechanical behavioural aspects of Al-356 under the influence of boron carbide and magnesium. Lecture notes on multidisciplinary industrial engineering, pp 437–447. https://doi.org/10.1007/978-981-13-7643-6_35
Chen F, Gupta N, Behera RK, Rohatgi PK (2018) Graphene-reinforced aluminum matrix composites: a review of synthesis methods and properties. JOM 70(6):837–845. https://doi.org/10.1007/s11837-018-2810-7
Khan MM, Dixit G (2019) Evaluation of microstructure, mechanical, thermal and erosive wear behavior of aluminum-based composites. Silicon 12(1):59–70. https://doi.org/10.1007/s12633-019-00099-4
Singh M, Rana R, Purohit R, Sahu K (2015) Development and analysis of Al-matrix Nano composites fabricated by ultrasonic assisted squeeze casting process. Mater Today Proc 2(4–5):3697–3703. https://doi.org/10.1016/j.matpr.2015.07.146
Samal P, Mandava RK, Vundavilli PR (2020) Dry sliding wear behavior of al 6082 metal matrix composites reinforced with red mud particles. SN Appl Sci 2(2). https://doi.org/10.1007/s42452-020-2136-2
Lukose L, Babu K, Srinivasan S (2020) Development of aluminium 6082 alloy reinforced with Al2O3 by die casting and investigation of microstructural and mechanical properties. Mater Today Proc 27:2520–2525. https://doi.org/10.1016/j.matpr.2019.09.229
James SJ, Venkatesan K, Kuppan P, Ramanujam R (2014) Hybrid aluminium metal matrix composite reinforced with sic and TiB2. Procedia Eng 97:1018–1026. https://doi.org/10.1016/j.proeng.2014.12.379
Venkatesh L, Arjunan TV, Ravikumar K (2019) Microstructural characteristics and mechanical behaviour of aluminium hybrid composites reinforced with groundnut shell ash and B4C. J Braz Soc Mech Sci Eng 41(7). https://doi.org/10.1007/s40430-019-1800-1
Oladayo O, Sikirat AK (2019) Mechanical and electrochemical behaviour of aluminum-based hybrid composites reinforced with silicon carbide and pride of barbardos seed ash produced by stir casting. Mater Sci Eng Int J 3(5). https://doi.org/10.15406/mseij.2019.03.00110
Chandla NK, Yashpal Kant S, Goud M, Jawalkar C (2020) Experimental analysis and mechanical characterization of al 6061/alumina/bagasse ash hybrid reinforced metal matrix composite using vacuum-assisted stir casting method. J Com Mater 54(27):4283–4297. https://doi.org/10.1177/0021998320929417
Dolata AJ, Mróz M, Dyzia M, Jacek-Burek M (2020) Scratch testing of AlSi12/SiCp composite layer with high share of reinforcing phase formed in the centrifugal casting process. Materials 13(7):1685. https://doi.org/10.3390/ma13071685
Reddy PV, Prasad PR, Krishnudu DM, Goud EV (2019) An investigation on mechanical and wear characteristics of al 6063/TiC metal matrix composites using RSM. J Bio Tribo Corros 5(4). https://doi.org/10.1007/s40735-019-0282-0
Dwivedi S, Srivastava A, Maurya N, Maurya M (2019) Microstructure and mechanical properties of al 6061/Al2O3/fly-ash composite fabricated through stir casting. Annales de Chimie - Science des Matériaux 43(5), 341–346. https://doi.org/10.18280/acsm.430510
Kumar UKAV (2017) Method of stir casting of aluminum metal matrix composites: a review. Mater Today Proc 4(2):1140–1146
Singh J, Jawalkar CS, Belokar RM (2019) Analysis of mechanical properties of AMC fabricated by vacuum stir casting process. Silicon 12(10):2433–2443. https://doi.org/10.1007/s12633-019-00338-8
Senemar M, Niroumand B, Maleki A, Rohatgi PK (2017) Synthesis of the in situ aluminum matrix composite through pyrolysis of high temperature vulcanization silicone. J Compos Mater 52(1):123–134. https://doi.org/10.1177/0021998317702955
Vinod B, Ramanathan S, Ananthi V, Selvakumar N (2018) Fabrication and characterization of organic and in-organic reinforced A356 aluminium matrix hybrid composite by improved double-stir casting. Silicon 11(2):817–829. https://doi.org/10.1007/s12633-018-9881-5
Venkata Siva SB, Sahoo KL, Ganguly RI, Dash RR, Singh SK, Satpathy BK, Srinivasarao G (2013) Preparation of aluminum metal matrix composite with novel in situ ceramic composite particulates, developed from waste colliery shale material. Metall and Mater Trans B 44(4):800–808. https://doi.org/10.1007/s11663-013-9832-x
Abdizadeh H, Baghchesara MA (2013) Investigation on mechanical properties and fracture behavior of A356 aluminum alloy based ZrO2 particle reinforced metal-matrix composites. Ceram Int 39(2):2045–2050. https://doi.org/10.1016/j.ceramint.2012.08.057
Sharma P, Sharma S, Khanduja D (2015) A study on microstructure of aluminium matrix composites. J Asian Ceram Soc 3(3):240–244. https://doi.org/10.1016/j.jascer.2015.04.001
Alaneme KK, Sanusi KO (2015) Microstructural characteristics, mechanical and wear behaviour of aluminium matrix hybrid composites reinforced with alumina, rice husk ash and graphite. Eng Sci Technol Int J 18(3):416–422. https://doi.org/10.1016/j.jestch.2015.02.003
Imran M, Khan AA, Megeri S, Sadik S (2016) Study of hardness and tensile strength of aluminium-7075 percentage varying reinforced with graphite and bagasse-ash composites. Resour Efficient Technol 2(2):81–88. https://doi.org/10.1016/j.reffit.2016.06.007
Quader SM, Murthy BS, Ravinder Reddy P (2016) Processing and mechanical properties of Al2O3 and red mud particle reinforced AA6061 hybrid composites. J Miner Mater Charact Eng 04(02):135–142. https://doi.org/10.4236/jmmce.2016.42013
Singh K, Rana R, Pandey A (2017) Fabrication and mechanical properties characterization of aluminium alloy LM24/B 4 C composites. Mater Today Proc 4(2):701–708. https://doi.org/10.1016/j.matpr.2017.01.075
Magibalan S, Senthilkumar P, Palanivelu R, Senthilkumar C, Shivasankaran N, Prabu M (2018) Dry sliding behavior of aluminum alloy 8011 with 12% fly ash composites. Mater Res Express 5(5):056505. https://doi.org/10.1088/2053-1591/aabf46
Prasad DS, Ebenezer NS, Shoba C, Raju P, Rao PS (2018) The effect of T6 heat treatment on corrosion behavior of nickel electroplated metal matrix composites. Silicon 11(4):2025–2032. https://doi.org/10.1007/s12633-018-0023-x
Karthikeyan A, Jinu GR (2019) Investigation on mechanical and corrosion behaviour of AA8011 reinforced with tic and graphite hybrid composites. Mater Res Express. https://doi.org/10.1088/2053-1591/ab3e87
Karuppusamy T, Velmurugan C, Thirumalaimuthukumaran M (2019) Experimental study on the mechanical properties of heat treated aluminium composites. Mater Res Express 6(9):096552. https://doi.org/10.1088/2053-1591/ab2ebb
Soundararajan R, Ramesh A, Sivasankaran S, Vignesh M (2017) Modeling and analysis of mechanical properties of aluminium alloy (A413) reinforced with boron carbide (B 4 C) processed through squeeze casting process using artificial neural network model and statistical technique. Mater Today Proc 4(2):2008–2030. https://doi.org/10.1016/j.matpr.2017.02.047
Ghomashchi MR, Vikhrov A (2000) Squeeze casting: an overview. J Mater Process Technol 101(1–3):1–9
Baghi M, Niroumand B, Emadi R (2017) Fabrication and characterization of squeeze cast A413-CSF composites. J Alloy Compd 710:29–36. https://doi.org/10.1016/j.jallcom.2017.03.136
Yue H, Wang B, Gao X, Zhang S, Lin X, Yao L, Guo E (2017) Effect of interfacial modifying on the microstructures, mechanical properties and abrasive wear properties of aluminum borate whiskers reinforced 6061Al composite. J Alloy Compd 692:395–402. https://doi.org/10.1016/j.jallcom.2016.09.082
Kannan C, Ramanujam R (2017) Comparative study on the mechanical and microstructural characterisation of AA 7075 nano and hybrid nanocomposites produced by stir and squeeze casting. J Adv Res 8(4):309–319. https://doi.org/10.1016/j.jare.2017.02.005
Chen G, Yang M, Jin Y, Zhang H, Han F, Chen Q, Zhao Z (2019) Ultrasonic assisted squeeze casting of a wrought aluminum alloy. J Mater Process Technol 266:19–25. https://doi.org/10.1016/j.jmatprotec.2018.10.032
Zhang Q, Dong S, Ma S, Hou X, Yang W, Zhang Y, Wu G (2020) Microstructure and compressive behavior of lamellar Al2O3p/Al composite prepared by freeze-drying and mechanical-pressure infiltration method. Sci Eng Compos Mater 27(1):1–9. https://doi.org/10.1515/secm-2020-0001
Kim HH, Babu JS, Kang CG (2014) Hot extrusion of A356 aluminum metal matrix composite with carbon nanotube/Al2O3 hybrid reinforcement. Metall and Mater Trans A 45(5):2636–2645. https://doi.org/10.1007/s11661-014-2185-5
Che Z, Wang Q, Wang L, Li J, Zhang H, Zhang Y, Wang X, Wang J, Kim MJ (2017) Interfacial structure evolution of ti-coated diamond particle reinforced al matrix composite produced by gas pressure infiltration. Compos B Eng 113:285–290. https://doi.org/10.1016/j.compositesb.2017.01.047
Zhang H, Wu J, Zhang Y, Li J, Wang X (2015) Effect of metal matrix alloying on mechanical strength of diamond particle-reinforced aluminum composites. J Mater Eng Perform 24(6):2556–2562. https://doi.org/10.1007/s11665-015-1527-9
Inegbenebor AO, Bolu CA, Babalola PO, Inegbenebor AI, Fayomi OS (2016) Aluminum silicon carbide particulate metal matrix composite development via stir casting processing. Silicon 10(2):343–347. https://doi.org/10.1007/s12633-016-9451-7
Sambath kumar M, Navaneethakrishnan P, Ponappa K, Sasikumar K (2017) Mechanical and corrosion behavior of Al7075 (Hybrid) metal matrix composites by two step stir casting process. Latin Am J Solids Struct 14(2):243–255. https://doi.org/10.1590/1679-78253132
Am R, Kaleemulla M, Doddamani S, Kn B (2019) Material characterization of sic and Al2O3–reinforced hybrid aluminum metal matrix composites on wear behavior. Adv Comp Lett 28:096369351985635. https://doi.org/10.1177/0963693519856356
Soltani S, Azari Khosroshahi R, Taherzadeh Mousavian R, Jiang Z, Fadavi Boostani A, Brabazon D (2015) Stir casting process for manufacture of al–sic composites. Rare Met 36(7):581–590. https://doi.org/10.1007/s12598-015-0565-7
Mohana kumara, K., Rajashekar, H., Ghanaraja, S., & Ajitprasad, S. (2014) Development and mechanical properties of sic reinforced cast and extruded al based metal matrix composite. Procedia Mater Sci 5:934–943. https://doi.org/10.1016/j.mspro.2014.07.381
Barekar N, Tzamtzis S, Dhindaw BK, Patel J, Hari Babu N, Fan Z (2009) Processing of aluminum-graphite particulate metal matrix composites by advanced shear technology. J Mater Eng Perform 18(9):1230–1240. https://doi.org/10.1007/s11665-009-9362-5
Hu Q, Zhao H, Li F (2017) Microstructures and properties of sic particles reinforced aluminum-matrix composites fabricated by vacuum-assisted high pressure die casting. Mater Sci Eng A 680:270–277. https://doi.org/10.1016/j.msea.2016.10.090
Mansoor M, Shahid M (2016) Carbon nanotube-reinforced aluminum composite produced by induction melting. J Appl Res Technol 14(4):215–224. https://doi.org/10.1016/j.jart.2016.05.002
Prasad DS, Shoba C, Ramanaiah N (2014) Investigations on mechanical properties of aluminum hybrid composites. J Market Res 3(1):79–85. https://doi.org/10.1016/j.jmrt.2013.11.002
Pawar P, Utpat AA (2014) Development of aluminium based silicon carbide particulate metal matrix composite for spur gear. Procedia Mater Sci 6:1150–1156. https://doi.org/10.1016/j.mspro.2014.07.187
Dhanasekaran S, Sunilraj S, Ramya G, Ravishankar S (2015) SiC and Al2O3 reinforced aluminum metal matrix composites for heavy vehicle clutch applications. Trans Indian Inst Met 69(3):699–703. https://doi.org/10.1007/s12666-015-0542-8
Kumar D, Singh PK (2019) Microstructural and mechanical characterization of al-4032 based metal matrix composites. Mater Today Proc 18:2563–2572. https://doi.org/10.1016/j.matpr.2019.07.114
Pitchayyapillai G, Seenikannan P, Raja K, Chandrasekaran K (2016) Al6061 hybrid metal matrix composite reinforced with alumina and molybdenum disulphide. Adv Mater Sci Eng 2016:1–9. https://doi.org/10.1155/2016/6127624
Shao C, Zhao S, Wang X, Zhu Y, Zhang Z, Ritchie RO (2019) Architecture of high-strength aluminum–matrix composites processed by a novel micro casting technique. NPG Asia Mater 11(1). https://doi.org/10.1038/s41427-019-0174-2
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Chawla, D., Nayak, M., Gupta, P. (2024). A Comprehensive Review on Aluminium MMC Fabricated by Liquid-Phase Fabrication Methodologies. In: Tyagi, R.K., Gupta, P., Das, P., Prakash, R. (eds) Advances in Engineering Materials. FLAME 2022. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-99-4758-4_18
Download citation
DOI: https://doi.org/10.1007/978-981-99-4758-4_18
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-4757-7
Online ISBN: 978-981-99-4758-4
eBook Packages: EngineeringEngineering (R0)