Abstract
Care for human life should be a priority for all the people on Earth. The number of elements jeopardizing human life, including pathogenic microbes, has been increasing. Many microbial infections are often challenging to treat and result in the patient’s death. Moreover, the currently applied decontamination methods are often not effective. Therefore, research around the world has been focused on developing new solutions to fight against harmful microbes. An interesting and promising concept in this field are polymers exhibiting antimicrobial activity. Among such polymers, much attention has been paid to maleic anhydride-derived materials. Maleic anhydride is a well-known raw material used in a wide spectrum of industries. Due to its specific structure it finds its applications in many polymerization and copolymerization processes. Some of the products possess antimicrobial properties and can be used as protective coatings or drug carriers. This chapter presents the examples of the scientists achievements in the field of antimicrobial maleic anhydride polymers.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abd El-Rehim HA, El-Hag Ali A, Mostafa TB et al (2004) Anti-microbial activity of anhydride copolymers and their derivatives prepared by ionizing radiation. Eur Polym J 40:2203–2212. https://doi.org/10.1016/j.eurpolymj.2004.01.044
Ahamad A, Mary Lubi C, Mohan A et al (2001) Synthesis of unsaturated polyester resin - effect of anhydride composition. Des Monomers Polym 4:260–267. https://doi.org/10.1163/156855501750536242
Andersson JA, Fitts EC, Kirtley ML et al (2016) New role for FDA-approved drugs in combating antibiotic-resistant bacteria. Antimicrob Agents Chemother 60:3717–3729. https://doi.org/10.1128/AAC.00326-16
Ashland (2017) Product Stewardship Summary Maleic Anhydride. http://www.ashland.com/sustainability/product/product-stewardship. Accessed 10 Mar 2020
Atanasova KR, Yilmaz Ö (2015) Prelude to oral microbes and chronic diseases: past, present and future. Microbes Infect 17:473–483. https://doi.org/10.1016/j.micinf.2015.03.007
Barman S, Konai MM, Samaddar S et al (2019a) Amino acid conjugated polymers: antibacterial agents effective against drug-resistant Acinetobacter baumannii with no detectable resistance. ACS Appl Mater Interfaces 11:33559–33572. https://doi.org/10.1021/acsami.9b09016
Barman S, Mukherjee S, Ghosh S et al (2019b) Amino-acid-conjugated polymer-rifampicin combination: effective at tackling drug-resistant Gram-negative clinical isolates. ACS Appl Bio Mater 2:5404–5414. https://doi.org/10.1021/acsabm.9b00732
Bastarrachea LJ, Goddard JM (2015) Antimicrobial coatings with dual cationic and N-halamine character: characterization and biocidal efficacy. J Agric Food Chem 63:4243–4251. https://doi.org/10.1021/acs.jafc.5b00445
Bastarrachea LJ, Goddard JM (2016) Self-healing antimicrobial polymer coating with efficacy in the presence of organic matter. Appl Surf Sci 378:479–488. https://doi.org/10.1016/j.apsusc.2016.03.198
Ben Maamar S, Hu J, Hartmann EM (2020) Implications of indoor microbial ecology and evolution on antibiotic resistance. J Expo Sci Environ Epidemiol 30:1–15. https://doi.org/10.1038/s41370-019-0171-0
Benčina M, Mavrič T, Junkar I et al (2018) The importance of antibacterial surfaces in biomedical applications. Adv Biomembr Lipid Self Assembly 28:115–165. https://doi.org/10.1016/bs.abl.2018.05.001
Bielawski CW, Grubbs RH (2007) Living ring-opening metathesis polymerization. Prog Polym Sci 32:1–29. https://doi.org/10.1016/j.progpolymsci.2006.08.006
Bisen PS, Debnath M, Prasad GBKS (2012a) Human and microbial world. In: Microbes: concepts and applications, 1st edn. Wiley, Hoboken, pp 1–64
Bisen PS, Debnath M, Prasad GBKS (2012b) Microbes as a tool for industry and research. In: Microbes: concepts and applications, 1st edn. Wiley, Hoboken, pp 567–684
Bodnar A, Solymoss M, Szmercsanyi IV et al (1990) Method of preparation of unsaturated polyester resins from maleic acid/anhydride. United States Patent 4,902,773
Boruah M, Gogoi P, Adhikari B et al (2012) Preparation and characterization of Jatropha Curcas oil based alkyd resin suitable for surface coating. Prog Org Coat 74:596–602. https://doi.org/10.1016/j.porgcoat.2012.02.007
Brinkac L, Voorhies A, Gomez A et al (2017) The threat of antimicrobial resistance on the human microbiome. Microb Ecol 74:1001–1008. https://doi.org/10.1007/s00248-017-0985-z
Brown D (2015) Antibiotic resistance breakers: can repurposed drugs fill the antibiotic discovery void? Nat Rev Drug Discov 14:821–832. https://doi.org/10.1038/nrd4675
Can HK, Karakus G, Tuzcu N (2014) Synthesis, characterization and in vitro antibacterial assessments of a novel modified poly[maleic anhydride-alt-acrylic acid]/acriflavine conjugate. Polym Bull 71:2903–2921. https://doi.org/10.1007/s00289-014-1230-2
Cerkez I (2018) N-Halamine-based antimicrobial coatings. In: Handbook of antimicrobial coatings. Elsevier, London, pp 391–409
Chatterjee A, Abraham J (2018) Microbial contamination, prevention and early detection in food Industry. In: Microbial contamination and food degradation. Elsevier, London, pp 23–62
Chatterjee S, Raval IH (2019) Pathogenic microbial genetic diversity with reference to health. In: Microbial diversity in the genomic era. Elsevier, London, pp 559–577
Chlebicz A, Śliżewska K (2018) Campylobacteriosis, Salmonellosis, Yersiniosis, and Listeriosis as zoonotic foodborne diseases: a review. Int J Environ Res Public Health 15:1–28. https://doi.org/10.3390/ijerph15050863
Cloete WJ, Verwey L, Klumperman B (2013) Permanently antimicrobial waterborne coatings based on the dual role of modified poly(styrene-co-maleic anhydride). Eur Polym J 49:1080–1088. https://doi.org/10.1016/j.eurpolymj.2013.01.012
Croxen MA, Law RJ, Scholz R et al (2013) Recent advances in understanding enteric pathogenic Escherichia coli. Clin Microbiol Rev 26:822–880. https://doi.org/10.1128/CMR.00022-13
Den Boon S, Marston BJ, Nyenswah TG et al (2019) Ebola virus infection associated with transmission from survivors. Emerg Infect Dis 25:240–246. https://doi.org/10.3201/eid2502.181011
Dente M, Pierucci S, Tronconi E et al (2003) Selective oxidation of n-butane to maleic anhydride in fluid bed reactors: detailed kinetic investigation and reactor modelling. Chem Eng Sci 58:643–648. https://doi.org/10.1016/S0009-2509(02)00590-0
Dizman B, Elasri MO, Mathias LJ (2004) Synthesis and antimicrobial activities of new water-soluble bis-quaternary ammonium methacrylate polymers. J Appl Polym Sci 94:635–642. https://doi.org/10.1002/app.20872
Dodds WK, Whiles MR (2020) Microbes and plants. In: Freshwater ecology. Elsevier, London, pp 211–249
Dominic GJ, Yashoda MP, Ajith Kumar MP et al (2016) Process of making antimicrobial polymers from quaternary ammonium maleic di-ester surfmers and methyl methacrylate by emulsion polymerization. Macromol Symp 362:119–128. https://doi.org/10.1002/masy.201400264
Edwards RC (1985) United States Patent Number 4,515,904 Catalysts for the production of maleic anhydride by the oxidation of butane
Ergene C, Yasuhara K, Palermo EF (2018) Biomimetic antimicrobial polymers: recent advances in molecular design. Polym Chem 9:2407–2427. https://doi.org/10.1039/c8py00012c
Fang W, Cai Y, Chen X et al (2009) Poly(styrene-alt-maleic anhydride) derivatives as potent anti-HIV microbicide candidates. Bioorg Med Chem Lett 19:1903–1907. https://doi.org/10.1016/j.bmcl.2009.02.059
Ganewatta MS, Chen YP, Wang J et al (2014) Bio-inspired resin acid-derived materials as anti-bacterial resistance agents with unexpected activities. Chem Sci 5:2011–2016. https://doi.org/10.1039/c4sc00034j
Ganewatta MS, Miller KP, Singleton SP et al (2015) Antibacterial and biofilm-disrupting coatings from resin acid-derived materials. Biomacromolecules 16:3336–3344. https://doi.org/10.1021/acs.biomac.5b01005
Gascón J, Téllez C, Herguido J et al (2005) Fluidized bed reactors with two-zones for maleic anhydride production: different configurations and effect of scale. Ind Eng Chem Res 44:8945–8951. https://doi.org/10.1021/ie050638p
Gliścińska E, Gutarowska B, Brycki B et al (2013) Electrospun polyacrylonitrile nanofibers modified by quaternary ammonium salts. J Appl Polym Sci 128:767–775. https://doi.org/10.1002/app.38210
Gomes TAT, Elias WP, Scaletsky ICA et al (2016) Diarrheagenic Escherichia coli. Braz J Microbiol 47:3–30. https://doi.org/10.1016/j.bjm.2016.10.015
González LF, Joubert A, Andrès Y et al (2016) Filtration performances of HVAC filters for PM10 and microbial aerosols—influence of management in a lab-scale air handling unit. Aerosol Sci Technol 50:555–567. https://doi.org/10.1080/02786826.2016.1167833
Gooch JW (ed) (2007) Encyclopedic dictionary of polymers. Springer, New York
Grice EA, Segre JA (2012) The human microbiome: our second genome. Annu Rev Genomics Hum Genet 13:151–170. https://doi.org/10.1146/annurev-genom-090711-163814
Groneberg DA, Hilgenfeld R, Zabel P (2005) Molecular mechanisms of severe acute respiratory syndrome (SARS). Respir Res 6:1–16. https://doi.org/10.1186/1465-9921-6-8
Hacker J, Dobrindt U (2006) Pathogenomics: genome analysis of pathogenic microbes. Wiley, Hoboken
Hatti-Kaul R, Mamo G, Mattiasson B (2016) Anaerobes in biotechnology. In: Advances in biochemical engineering/biotechnology. Springer, Cham, pp 1–471
Hemalatha P, Veeraiah MK, Prasannakumar S et al (2014) Synthesis, characterisation and antibacterial activity of copolymer (N-vinylpyrrolidone – maleic anhydride) with N- diethylethanolamine. Int J Res Eng Technol 3:56–64. https://doi.org/10.15623/ijret.2014.0303011
Hernandez-Milian A, Payeras-Cifre A (2014) What is new in listeriosis? Biomed Res Int 2014:358051. https://doi.org/10.1155/2014/358051
Hernández-Moreno D, de la Casa RI, Soler-Rodríguez F (2014) Maleic anhydride. In: Encyclopedia of toxicology, 3rd edn. Elsevier, London, pp 138–141
Higgins R, Hutchings GJ (1980) Production of maleic anhydride. United States Patent 4,222,945
Hogg S (2005) Essential microbiology. Wiley, Hoboken
Huang J, Turner SR (2017) Recent advances in alternating copolymers: the synthesis, modification, and applications of precision polymers. Polymer 116:572–586. https://doi.org/10.1016/j.polymer.2017.01.020
Huang KS, Yang CH, Huang SL et al (2016) Recent advances in antimicrobial polymers: a mini-review. Int J Mol Sci 17:1578. https://doi.org/10.3390/ijms17091578
Institute of Medicine (2003) Microbial threats to health: emergence, detection, and response. National Academies Press, Washington DC
Jeong JH, Byoun YS, Ko SB et al (2001) Chemical modification of poly(styrene-alt-maleic anhydride) with antimicrobial 4-aminobenzoic acid and 4-hydroxybenzoic acid. J Ind Eng Chem 7:310–315
Jeong JH, Byoun YS, Lee YS (2002) Poly(styrene-alt-maleic anhydride)-4-aminophenol conjugate: synthesis and antibacterial activity. React Funct Polym 50:257–263. https://doi.org/10.1016/S1381-5148(01)00120-1
Jiang S, Wang L, Yu H et al (2006) Study on antibacterial behavior of insoluble quaternary ammonium. J Appl Polym Sci 99:2389–2394. https://doi.org/10.1002/app.22810
Jiao Y, Niu L, Ma S et al (2017) Quaternary ammonium-based biomedical materials: state-of-the-art, toxicological aspects and antimicrobial resistance. Prog Polym Sci 71:53–90. https://doi.org/10.1016/j.progpolymsci.2017.03.001
Kamaruzzaman NF, Tan LP, Hamdan RH et al (2019) Antimicrobial polymers: the potential replacement of existing antibiotics? Int J Mol Sci 20:112747. https://doi.org/10.3390/ijms20112747
Karakuş G (2016) Synthesis, structural characterization, and water solubility of a novel modified poly(maleic anhydride-co-vinyl acetate)/acriflavine conjugate. J Biol Chem 44:549–558. https://doi.org/10.15671/HJBC.2016.135
Kenawy ER, Abdel-Hay FI, El-Shanshoury AERR et al (2002) Biologically active polymers. V. Synthesis and antimicrobial activity of modified poly(glycidyl methacrylate-co-2-hydroxyethyl methacrylate) derivatives with quaternary ammonium and phosphonium salts. J Polym Sci Part A Polym Chem 40:2384–2393. https://doi.org/10.1002/pola.10325
Kenawy ER, Worley SD, Broughton R (2007) The chemistry and applications of antimicrobial polymers: a state-of-the-art review. Biomacromolecules 8:1359–1384. https://doi.org/10.1021/bm061150q
Khazaei A, Saednia S, Saien J et al (2013) Grafting amino drugs to poly(styrene-alt-maleic anhydride) as a potential method for drug release. J Braz Chem Soc 24:1109–1115. https://doi.org/10.5935/0103-5053.20130145
Kumar A, Chordia N (2017) Role of microbes in human health. Appl Microbiol Open Access 3:2. https://doi.org/10.4172/2471-9315.1000131
Lustgarten MS (2016) Classifying aging as a disease: the role of microbes. Front Genet 7:10–13. https://doi.org/10.3389/fgene.2016.00212
Majumdar P, Lee E, Gubbins N et al (2009) Synthesis and antimicrobial activity of quaternary ammonium-functionalized POSS (Q-POSS) and polysiloxane coatings containing Q-POSS. Polymer 50:1124–1133. https://doi.org/10.1016/j.polymer.2009.01.009
Mani S, Wierzba T, Walker RI (2016) Status of vaccine research and development for Shigella. Vaccine 34:2887–2894. https://doi.org/10.1016/j.vaccine.2016.02.075
Mcewen SA, Collignon PJ (2017) Antimicrobial resistance: a one health colloquium. Microbiol Spectr 6:1–26. https://doi.org/10.1128/microbiolspec.ARBA-0009-2017
Memarzadeh F, Olmsted RN, Bartley JM (2010) Applications of ultraviolet germicidal irradiation disinfection in health care facilities: effective adjunct, but not stand-alone technology. Am J Infect Control 38:S13–S24. https://doi.org/10.1016/j.ajic.2010.04.208
Miró-Canturri A, Ayerbe-Algaba R, Smani Y (2019) Drug repurposing for the treatment of bacterial and fungal infections. Front Microbiol 10:41. https://doi.org/10.3389/fmicb.2019.00041
Moghadam PN, Azaryan E, Zeynizade B (2010) Investigation of poly(styrene-alt-maleic anhydride) copolymer for controlled drug delivery of ceftriaxone antibiotic. J Macromol Sci Part A Pure Appl Chem 47:839–848. https://doi.org/10.1080/10601325.2010.492265
Möritz M, Peters H, Nipko B, Rüden H (2001) Capability of air filters to retain airborne bacteria and molds in heating, ventilating and air-conditioning (HVAC) systems. Int J Hyg Environ Health 203:401–409. https://doi.org/10.1078/1438-4639-00054
Morrison KR, Allen RA, Minbiole KPC et al (2019) More QACs, more questions: recent advances in structure activity relationships and hurdles in understanding resistance mechanisms. Tetrahedron Lett 60:150935. https://doi.org/10.1016/j.tetlet.2019.07.026
Musa OM (2016) Handbook of maleic anhydride based materials: syntheses, properties and applications. Springer, Cham
Musumeci T, Puglisi G (2013) Antimicrobial agents. In: Drug-biomembrane interaction studies: the application of calorimetric techniques. Woodhead Publishing Limited, Oxford, pp 305–333
Nagaraja A, Jalageri MD, Puttaiahgowda YM et al (2019) A review on various maleic anhydride antimicrobial polymers. J Microbiol Methods 163:105650. https://doi.org/10.1016/j.mimet.2019.105650
Nasirtabrizi MH, Ziaei ZM, Jadid AP et al (2013) Synthesis and chemical modification of maleic anhydride copolymers with phthalimide groups. Int J Ind Chem 4:11. https://doi.org/10.1186/2228-5547-4-11
National Academies of Sciences Engineering and Medicine (2017) Microbiomes of the built environment: a research agenda for indoor microbiology, human health, and buildings. The National Academies Press, Washington, DC
Nicolle LE (2011) Antimicrobial resistance. Eur Infect Dis 5:92–97. https://doi.org/10.4037/nci.0000000000000102
Noh H, Yu JS, Ko JS et al (2017) Preparation of poly(ethylene-co-acrylic acid) grafted with aliphatic quaternary ammonium salts as antibacterial polymers. Bull Kor Chem Soc 38:890–898. https://doi.org/10.1002/bkcs.11198
Noorbakhsh F, Abdolmohammadi K, Fatahi Y et al (2019) Zika virus infection, basic and clinical aspects: a review article. Iran J Public Health 48:20–31. https://doi.org/10.18502/ijph.v48i1.779
Nurdin N, Helary G, Sauvet G (1993) Biocidal polymers active by contact. II. Biological evaluation of polyurethane coatings with pendant quaternary ammonium salts. J Appl Polym Sci 50:663–670. https://doi.org/10.1002/app.1993.070500411
Parker SF, Wilson CC, Tomkinson J et al (2001) Structure and dynamics of maleic anhydride. J Phys Chem A 105:3064–3070. https://doi.org/10.1021/jp0038005
Patel H, Raval DA, Madamwar D et al (1997) Polymeric prodrugs. Synthesis, release study and antimicrobial properties of polymer-bound acriflavine. Die Angew Makromol Chem 245:1–8. https://doi.org/10.1016/j.ijpharm.2003.07.016
Patel H, Raval DA, Madamwar D et al (1998) Polymeric prodrug: synthesis, release study and antimicrobial property of poly(styrene-co-maleic anhydride)-bound acriflavine. Angew Makromol Chem 263:25–30. https://doi.org/10.1002/(SICI)1522-9505(19981215)263:1<25::AID-APMC25>3.0.CO;2-9
Patel JS, Patel SV, Talpada NP et al (1999) Bioactive polymers: synthesis, release study and antimicrobial properties of polymer bound Ampicillin. Angew Makromol Chem 271:24–27. https://doi.org/10.1002/(SICI)1522-9505(19991101)271:1<24::AID-APMC24>3.0.CO;2-L
Pegues DA, Ohl ME, Miller SI (2006) Nontyphoidal Salmonellosis. Trop Infect Dis 1:241–254. https://doi.org/10.1016/B978-0-443-06668-9.50023-5
Pigłowski M (2019) Pathogenic and non-pathogenic microorganisms in the rapid alert system for food and feed. Int J Environ Res Public Health 16:1–19. https://doi.org/10.3390/ijerph16030477
Prasad R, Siddhardha B, Dyavaiah M (2020) Nanostructures for antimicrobial and antibiofilm applications. Springer International Publishing, Cham. ISBN 978-3-030-40336-2. https://www.springer.com/gp/book/9783030403362
Rani N, Sangwan P, Joshi M et al (2019) Wastewater treatment. In: Microbial wastewater treatment. Elsevier, London, pp 83–102
Reed NG (2010) The history of ultraviolet germicidal irradiation for air disinfection. Public Health Rep 125:15–27. https://doi.org/10.1177/003335491012500105
Rodríguez-Hernández J (2017) Polymers against microorganisms. Springer, New York
Rutala WA, Weber DJ (2019) Disinfection, sterilization, and antisepsis: an overview. Am J Infect Control 47:A3–A9. https://doi.org/10.1016/j.ajic.2019.01.018
Sauvet G, Fortuniak W, Kazmierski K et al (2003) Amphiphilic block and statistical siloxane copolymers with antimicrobial activity. J Polym Sci Part A Polym Chem 41:2939–2948. https://doi.org/10.1002/pola.10895
Schlagenhauf P, Poumerol G, Santos-O’Connor F (2017) Microbes on the move: prevention, required vaccinations, curtailment, outbreak. In: Peterson E, Chen LH, Schlagenhauf-Lawlor P (eds) Infectious diseases: a geographic guide, 2nd edn. Wiley, Hoboken, pp 45–54
Septimus EJ (2018) Antimicrobial resistance: an antimicrobial/diagnostic stewardship and infection prevention approach. Med Clin North Am 102:819–829. https://doi.org/10.1016/j.mcna.2018.04.005
Siedenbiedel F, Tiller JC (2012) Antimicrobial polymers in solution and on surfaces: overview and functional principles. Polymers 4:46–71. https://doi.org/10.3390/polym4010046
Singh SR, Krishnamurthy NB, Mathew BB (2014) A review on recent diseases caused by microbes. J Appl Environ Microbiol 2:106–115. https://doi.org/10.12691/JAEM-2-4-4
Smith M (2020) Microorganisms and microbiome. In: Gene environment interactions. Elsevier, London, pp 177–203
Stockwell RE, Ballard EL, O’Rourke P et al (2019) Indoor hospital air and the impact of ventilation on bioaerosols: a systematic review. J Hosp Infect 103:175–184. https://doi.org/10.1016/j.jhin.2019.06.016
Sun J, Chang EB (2014) Exploring gut microbes in human health and disease: pushing the envelope. Genes Dis 1:132–139. https://doi.org/10.1016/j.gendis.2014.08.001
Talu M, Uzluk E, Yüksel B (2010) Synthesis, characterization and bactericidal properties of poly(N-vinyl-2-pyrrolidone-co-maleic anhydride-co-N-isopropyl acrylamide). Macromol Symp 297:188–199. https://doi.org/10.1002/masy.200900140
Temiz A, Toǧay SÖ, Şener A et al (2006) Antimicrobial poly(N-vinyl-2-pyrrolidone-alt-maleic anhydride)/ poly(ethylene imine) macrocomplexes. J Appl Polym Sci 102:5841–5847. https://doi.org/10.1002/app.24903
Tiller JC, Liao CJ, Lewis K et al (2001) Designing surfaces that kill bacteria on contact. Proc Natl Acad Sci U S A 98:5981–5985. https://doi.org/10.1073/pnas.111143098
Timofeeva L, Kleshcheva N (2011) Antimicrobial polymers: mechanism of action, factors of activity, and applications. Appl Microbiol Biotechnol 89:475–492. https://doi.org/10.1007/s00253-010-2920-9
Tiwari A, Chaturvedi A (2018) Antimicrobial coatings—technology advancement or scientific myth. In: Handbook of antimicrobial coatings. Elsevier, London, pp 1–5
Tseng CC, Li CS (2005) Inactivation of virus-containing aerosols by ultraviolet germicidal irradiation. Aerosol Sci Technol 39:1136–1142. https://doi.org/10.1080/02786820500428575
Uppu DSSM, Haldar J (2016) Lipopolysaccharide neutralization by cationic-amphiphilic polymers through pseudoaggregate formation. Biomacromolecules 17:862–873. https://doi.org/10.1021/acs.biomac.5b01567
Uppu DSSM, Samaddar S, Ghosh C et al (2016) Amide side chain amphiphilic polymers disrupt surface established bacterial bio-films and protect mice from chronic Acinetobacter baumannii infection. Biomaterials 74:131–143. https://doi.org/10.1016/j.biomaterials.2015.09.042
Vaydya UR, Nadkarni VM (1987) Unsaturated polyester resins from poly(ethylene terephthalate) waste. 1. Synthesis and characterisation. Ind Eng Chem Res 26:194–198. https://doi.org/10.1021/ie00062a003
Veron L, Revol M, Mandrand B et al (2001) Synthesis and characterization of poly(N-vinyl pyrrolidone-alt-maleic anhydride): conjugation with bovine serum albumin. J Appl Polym Sci 81:3327–3337. https://doi.org/10.1002/app.1789
Vicente AI, Campos J, Bordado JM et al (2008) Maleic anhydride modified ethylene-diene copolymers: synthesis and properties. React Funct Polym 68:519–526. https://doi.org/10.1016/j.reactfunctpolym.2007.10.026
Wang J, Chen YP, Yao K et al (2012) Robust antimicrobial compounds and polymers derived from natural resin acids. Chem Commun 48:916–918. https://doi.org/10.1039/c1cc16432e
Wang C, Hu X, Zhang Z (2019a) Airborne disinfection using microwave-based technology: energy efficient and distinct inactivation mechanism compared with waterborne disinfection. J Aerosol Sci 137:105437. https://doi.org/10.1016/j.jaerosci.2019.105437
Wang J, Sui M, Ma Z et al (2019b) Antibacterial performance of polymer quaternary ammonium salt-capped silver nanoparticles on: Bacillus subtilis in water. RSC Adv 9:25667–25676. https://doi.org/10.1039/c9ra05944j
Wang Q, Zhu X, Zhu P et al (2019c) N-halamine antibacterial cellulose fabrics functionalized with copoly(acrylamide-maleic anhydride). Fibers Polym 20:906–912. https://doi.org/10.1007/s12221-019-8865-4
Williamson DA, Carter GP, Howden BP (2017) Current and emerging topical antibacterial and antiseptics: agents, action, and resistance patterns. Clin Microbiol Rev 30:827–860. https://doi.org/10.1128/CMR.00112-16
World Health Organization (2015) Global action plan on antimicrobial resistance. Microbe Mag 10:354. https://doi.org/10.1128/microbe.10.354.1
Xue Y, Xiao H, Zhang Y (2015) Antimicrobial polymeric materials with quaternary ammonium and phosphonium salts. Int J Mol Sci 16:3626–3655. https://doi.org/10.3390/ijms16023626
Yang Y, Cai Z, Huang Z et al (2018) Antimicrobial cationic polymers: from structural design to functional control. Polym J 50:33–44. https://doi.org/10.1038/pj.2017.72
Zeng M, Xu J, Luo Q et al (2020) Constructing antibacterial polymer nanocapsules based on pyridine quaternary ammonium salt. Mater Sci Eng C 108:110383. https://doi.org/10.1016/j.msec.2019.110383
Zhang Z, Wagner VE (2017) Antimicrobial coatings and modifications on medical devices. Springer, New York
Zhang Z, Cheng G, Carr LR et al (2008) The hydrolysis of cationic polycarboxybetaine esters to zwitterionic polycarboxybetaines with controlled properties. Biomaterials 29:4719–4725. https://doi.org/10.1016/j.biomaterials.2008.08.030
Zhang A, Liu Q, Lei Y et al (2015) Synthesis and antimicrobial activities of acrylamide polymers containing quaternary ammonium salts on bacteria and phytopathogenic fungi. React Funct Polym 88:39–46. https://doi.org/10.1016/j.reactfunctpolym.2015.02.005
Zhong W, Dong C, Liuyang R et al (2017) Controllable synthesis and antimicrobial activities of acrylate polymers containing quaternary ammonium salts. React Funct Polym 121:110–118. https://doi.org/10.1016/j.reactfunctpolym.2017.10.010
Zhong Y, Godwin P, Jin Y et al (2020) Biodegradable polymers and green-based antimicrobial packaging materials: a mini-review. Adv Ind Eng Polym Res 3:27–35. https://doi.org/10.1016/j.aiepr.2019.11.002
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Wal, K., Stawiński, W., Dmochowska, A., Rutkowski, P. (2021). Advanced Antimicrobial Materials and Applications: Maleic Anhydride Antimicrobial Polymers. In: Inamuddin, Ahamed, M.I., Prasad, R. (eds) Advanced Antimicrobial Materials and Applications. Environmental and Microbial Biotechnology. Springer, Singapore. https://doi.org/10.1007/978-981-15-7098-8_7
Download citation
DOI: https://doi.org/10.1007/978-981-15-7098-8_7
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-7097-1
Online ISBN: 978-981-15-7098-8
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)