Abstract
Finishing operations represent a critical and expensive phase of overall production processes. The most labor intensive, uncontrollable area in the manufacturing of precision parts involves final finishing operations, which frequently demand as much as 15% of the total manufacturing cost. The dimensional and alignment accuracy and quality of surface finish are taken care of by finishing processes such as grinding, lapping, honing, and super-finishing (i.e. traditional methods of finishing). But, the applications of these traditional abrasive finishing processes are limited to the production of work pieces of basic forms such as flat, cylindrical, etc. These finishing processes are being pushed to their limits of performance especially in components of hard materials and complicated shapes. The need to develop finishing processes with wider bounds of application areas, better quality performance, higher productivity, and automatic operation has led to the development of nano-finishing processes.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ali-Tavoli M, Zadeh NN, Khakhali A, Mehran M (2006) Multi-objective optimization of abrasive flow machining processes using polynomial neural networks and genetic algorithms. Mach Sci Technol 10:1–20
Bandyopadhyay BP, Ohmori H (1999) The effect of ELID grinding on the flexural strength of silicon nitride. Int J Mach Tools Manuf 39:839–853
Bandyopadhyay BP, Ohmori H, Takahashi I (1996) Ductile regime mirror finish grinding of ceramics with electrolytic in-process dressing (ELID) grinding. Mater Manuf Proc 11:789–801
Barletta M (2009) Progress in abrasive fluidized bed machining. J Mater Process Technol 209(20):6087–6102
Bergh F, Engelbrecht AP (2006) A study of particle swarm optimization particle trajectories. Inf Sci 176:937–971
Bifano TG, Dow TA, Scattergood RO (1991) Ductile-regime grinding: a new technology for machining brittle materials. J Eng Ind 113:184–189
Biswas I, Kumar AS, Rahman M (2010) A study on the equilibrium condition of the oxide layer in ELID grinding. Int J Abras Technol 3(1):7–12
Chang GW, Yan BH, Hsu RT (2002) Study on cylindrical magnetic abrasive finishing using unbonded magnetic abrasives. Int J Mach Tools Manuf 42:575–583
Das M, Jain VK, Ghoshdastidar PS (2008) Fluid flow analysis of magnetorheological abrasive flow finishing (MRAFF) process. Int J Mach Tools Manuf 48(3–4):415–426
El-Taweel TA (2008) Modeling and analysis of hybrid electrochemical turning-magnetic abrasive finishing of 6061 Al/Al2O3 composite. Int J Adv Manuf Technol 37(7–8):705–714
Fang L, Zhao J, Li B, Sun K (2009) Movement patterns of ellipsoidal particle in abrasive flow machining. J Mater Process Technol 209(20):6048–6056
Fathima K, Kumar AS, Rahman M, Lim HS (2003) A study on wear mechanism and wear reduction strategies in grinding wheels used for ELID grinding. Wear 254:1247–1255
Fathima K, Rahman M, Kumar AS, Lim HS (2007) Modeling of ultra-precision ELID grinding. J Manuf Sci Eng 129(2):296–302
Fathima K, Schinhaerl M, Geiss A, Rascher R, Sperber P (2010) A knowledge based feed-back control system for precision ELID grinding. Precis Eng 34(10):124–132
Fox M, Agrawal K, Shinmura T, Komanduri R (1994) Magnetic abrasive finishing of rollers. CIRP Ann Manuf Technol 43(1):181–184
Fujihara K, Ohshiba K, Komatsu T, Ueno M, Ohmori H, Bandyopadhyay BP (1997) Precision surface grinding characteristics of ceramic matrix composites and structural ceramics with electrolytic inprocess dressing. Mach Sci Technol 1:81–94
Gorana VK, Jain VK, Lal GK (2004) Experimental investigations into cutting forces and active grain density during abrasive flow machining. Int J Mach Tools Manuf 44:201–211
Gorana VK, Jain VK, Lal GK (2006) Forces prediction during material deformation in abrasive flow machining. Wear 260:128–139
Gorana VK, Jain VK, Lal GK (2006) Prediction of surface roughness during abrasive flow machining. Int J Adv Manuf Technol 31:258–267
Im IT, Mun SD, Oh SM (2009) Micro machining of an STS 304 bar by magnetic abrasive finishing. J Mech Sci Technol 23(7):1982–1988
Jain VK (2009) Magnetic field assisted abrasive based micro-/nano-finishing. J Mater Process Technol 209(20):6022–6038
Jain VK (2000) Advanced machining processes. Allied Publishers, New Delhi
Jain VK, Adsul SG (2000) Experimental investigation into abrasive flow machining. Int J Mach Tools Manuf 40:1003–1021
Jain RK, Jain VK (1999) Simulation of surface generated in abrasive flow machining process. Robotics Comput Integr Manuf 15:403–412
Jain RK, Jain VK (2000) Optimum selection of machining conditions in abrasive flow machining using neural network. J Mater Process Technol 108:62–67
Jain RK, Jain VK (2001) Specific energy and temperature determination in abrasive flow machining process. Int J Mach Tools Manuf 41:1689–1704
Jain RK, Jain VK (2004) Stochastic simulation of active grain density in abrasive flow machining. J Mater Process Technol 152:17–22
Jain NK, Jain VK, Jha S (2007) Parametric optimization of advanced fine-finishing processes. Int J Adv Manuf Technol 34:1191–1213
Jain RK, Jain VK, Kalra PK (1999) Modeling of abrasive flow machining process: a neural network approach. Wear 231:242–248
Jain RK, Jain VK, Dixit PM (1999) Modeling of material removal and surface roughness in abrasive flow machining process. Int J Mach Tools Manuf 39:1903–1923
Jain VK, Kumar P, Behra PK, Jayswal SC (2001) Effect of working gap and cicumferential speed on the performance of magnetic abrasive finishing process. Wear 250:384–390
Jain VK, Kumar R, Dixit PM, Sidpara A (2009) Investigations into abrasive flow finishing of complex workpieces using FEM. Wear 267(1–4):71–80
Jayswal SC, Jain VK, Dixit PM (2005) Modeling and simulation of abrasive finishing process. Int J Adv Manuf Technol 26:477–490
Jha S, Jain VK (2006) Modeling and simulation of surface roughness in magnetorheological abrasive flow finishing (MRAFF) process. Wear 261(7–8):856–866
Jha S, Jain VK (2004) Design and development of the magnetorheological abrasive flow finishing process. Int J Mach Tools Manuf 44:1019–1029
Kar KK, Ravikumar NL, Tailor PB, Ramkumar J, Sathiyamoorthy D (2009) Performance evaluation and rheological characterization of newly developed butyl rubber based media for abrasive flow machining process. J Mater Process Technol 209(4):2212–2221
Kato T, Ohmori H, Zhang C, Yamazaki T, Akune Y, Hokkirigawa K (2001) Improvement of friction and wear properties of CVD-SiC films with new surface finishing method ‘ELID-grinding. Key Eng Mater 196:91–101
Kim J, Choi M (1995) Simulation for the prediction of surface-accuracy in magnetic abrasive machining. J Mater Process Technol 53:630–642
Ko SL, Baron YM, Park JI (2007) Micro deburring for precision parts using magnetic abrasive finishing method. J Mater Process Technol 187–188:19–25
Kumar G, Yadav V (2009) Temperature distribution in the workpiece due to plane magnetic abrasive finishing using FEM. Int J Adv Manuf Technol 41(11–12):1051–1058
Kremen GZ, Elsayed EA, Rafalorich VI (1996) Mechanism of material removal in magnetic abrasive process and the accuracy of machining. Int J Prod Res 34(9):2629–2638
Kremen GZ, Elsayed EA, Ribeiro JL (1994) Machining time estimation for magnetic abrasive processes. Int J Prod Res 32(12):2817–2825
Kwak JS (2009) Enhanced magnetic abrasive polishing of non-ferrous metals utilizing a permanent magnet. Int J Mach Tools Manuf 49(7–8):613–618
Lee ES (2000) A study on the mirror-like grinding of die steel with optimum in-process electrolytic dressing. J Mater Process Technol 100(1–3):200–208
Lim HS, Ohmori H, Lin W, Qian J (2000) High productivity and high accuracy electrode-less ELID grinding on die material. J Mould Tehchnol 15:148–149
Lim HS, Ohmori H, Lin W, Qian J (2001) Electrode-less micro ELID grinding on die and mould material. Jpn Soc Grind Eng 45:298–303
Mali HS, Manna A (2010) Optimum selection of abrasive flow machining conditions during fine finishing of Al/15Â wt% SiC-MMC using Taguchi method. Int J Adv Manuf Technol. doi:10.1007/s00170-010-2565-y
Mayer JE, Fang GP (1994) Effect of grit depth of cut on strength of ground ceramic. CIRP Ann Manuf Technol 43(1):299–312
Mollah AA, Pratihar DK (2008) Modeling of TIG welding and abrasive flow machining processes using radial basis function networks. Int J Adv Manuf Technol 37(9–10):937–952
Mori T, Hirota K, Kawashima Y (2003) Clarification of magnetic abrasive finishing mechanism. J Mater Process Technol 143–144:682–686
Ohmori H, Moriyasu S, Li W, Takahashi I, Park KY, Itoh N, Bandyopadhyay BP (1999) Highly efficient and precision fabrication of cylindrical parts from hard materials with the application of ELID (electrolytic in-process dressing). Mater Manuf Process 14:1–12
Ohmori H, Nakagawa T (1990) Mirror surface grinding of silicon wafers with electrolytic in-process dressing. CIRP Ann Manuf Technol 39(1):329–333
Ohmori H, Nakagawa T (1997) Utilization of nonlinear conditions in precision grinding with ELID (Electrolytic In-Process Dressing) for fabrication of hard material components. CIRP Ann Manuf Technol 46(1):261–264
Qian J, Wei L, Ohmori H (2000) Cylindrical grinding of bearing steel with electrolytic in-process dressing. Precis Eng 24:153–159
Rahman M, Kumar AS, Lim HS, Fatima K (2003) ELID grinding technique for nano finishing of brittle materials. SADHNA J Eng Sci Indian Acad Sci 28(5):1–18
Rajeshwar G, Kozak, Rajurkar KP (1994) Modeling and computer simulation of medium flow in abrasive flow machining process. In: Proceedings of International Mechanical Engineering Congress and Exposition. Chicago, PED 68:965–971
Rao RV, Pawar PJ (2010) Optimization of abrasive flow machining process parameters using artificial bee colony algorithm. In: Proceedings of International Conference on Advances in Mechanical Engineering. Surat, pp. 768–773
Rao RV, Pawar PJ, Davim JP (2009) Optimization of abrasive flow machining process parameters using particle swarm optimization and simulated annealing algorithms. In: Davim JP (ed) Artificial intelligence in manufacturing research. Nova Science Publications, New York
Rhoades LJ (1987) Abrasive flow machining with not-so-silly putty. Met Finish, 27–29 July
Rhoades LJ (1991) Abrasive flow machining: a case study. J Mater Process Technol 28:107–116
Sankar MR, Mondal S, Ramkumar J, Jain VK (2009) Experimental investigations and modeling of drill bit-guided abrasive flow finishing (DBG-AFF) process. Int J Adv Manuf Technol 42(7–8):678–688
Sankar MR, Ramkumar J, Jain VK (2009) Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow finishing (AFF) process. Wear 266(7–8):688–698
Shinmura T, Takazawa K, Hatano E, Matsunaga T (1990) Study in magnetic abrasive finishing. CIRP Ann Manuf Technol 39(1):325–328
Singh DK, Jain VK, Raghuram V (2004) Parametric study of magnetic abrasive finishing process. J Mater Process Technol 149:22–29
Singh S, Shan HS (2002) Development of magneto abrasive flow machining process. Int J Mach Tools Manuf 42:953–959
Stephenson DJ, Hedge J, Corbett J (2002) Surface finishing of Ni–Cr–B–Si composite coatings by precision grinding. Int J Mach Tools Manuf 42:357–363
Stephenson DJ, Veselovac D, Manley S, Corbett C (2001) Ultra-precision grinding of hard steels. Precis Eng 25:336–345
Tonshoff HK, Peters I, Inasaki PT (1992) Modeling and simulation of grinding processes. CIRP Ann Manuf Technol 41(2):677–688
Uhlmann E, Mihotovic V, Coenen A (2009) Modeling the abrasive flow machining process on advanced ceramic materials. J Mater Process Technol 209(20):6062–6066
Venkatesh VC, Inasaki I, Toenshof HK, Nakagawa T, Marinescu ID (1995) Observations on polishing and ultraprecision machining of semiconductor substrate materials. CIRP Ann Manuf Technol 44:611–618
Walia RS, Shan HS, Kumar P (2006) Parametric optimization of centrifugal force- assisted abrasive flow machining (CFAAFM) by the Taguchi method. Mater Manuf Process 21:375–382
Walia RS, Shan HS, Kumar P (2006) Multi-response optimization of CFAAFM process through Taguchi method and utility concept. Mater Manuf Process 21:907–914
Wang P, Shi Z, Xin Q (2000) Optical surface grinding of optical glasses with ELID grinding technique. Proc SPIE Int Soc Opt Eng 4231:509–514
Wani AM, Yadava V, Khatri A (2007) Simulation for the prediction of surface roughness in magnetic abrasive flow finishing (MAFF). J Mater Process Technol 190(1–3):282–290
Williams RE (1998) Acoustic emission characteristics of abrasive flow machining. J Manuf Sci Eng 120:264–271
Williams RE, Rajurkar KP (1992) Stochastic modeling and analysis of abrasive flow machining. J Eng Ind 144:74–81
Yamaguchi H, Shinmura T (2004) Internal finishing process for alumina ceramic components by a magnetic field assisted finishing process. Precis Eng 28:135–142
Yang LD, Lin CT, Chow HM (2009) Optimization in MAF operations using Taguchi parameter design for AISI304 stainless steel. Int J Adv Manuf Technol 42(5–6):595–605
Zhang F, Li W, Qiu Z, Ohmori H (2000) Application of ELID grinding technique to precision machining of optics. Proc SPIE Int Soc Opt Eng 4231:218–223
Zhanga C, Ohmori H, Kato T, Morita N (2001) Evaluation of surface characteristics of ground CVDSiC using cast iron bond diamond wheels. Precis Eng 25:56–62
Zhang B, Yang F, Wang J, Zhu Z, Monahan R (2000) Stock removal rate and workpiece strength in multi-pass grinding of ceramics. J Mater Process Technol 104:178–184
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2011 Springer-Verlag London Limited
About this chapter
Cite this chapter
Venkata Rao, R. (2011). Modeling and Optimization of Nano-finishing Processes. In: Advanced Modeling and Optimization of Manufacturing Processes. Springer Series in Advanced Manufacturing. Springer, London. https://doi.org/10.1007/978-0-85729-015-1_4
Download citation
DOI: https://doi.org/10.1007/978-0-85729-015-1_4
Published:
Publisher Name: Springer, London
Print ISBN: 978-0-85729-014-4
Online ISBN: 978-0-85729-015-1
eBook Packages: EngineeringEngineering (R0)