Overview
- Editors:
-
-
Quan-Sheng Shu
-
AMAC International, Inc., Newport News, USA
Access this book
Other ways to access
Table of contents (123 chapters)
-
- S. Claudet, P. Gayet, U. Wagner
Pages 1269-1276
-
- P. Dauguet, G. M. Gistau-Baguer, P. Briend
Pages 1277-1284
-
- J. Bösel, B. Chromec, A. Meier
Pages 1285-1292
-
-
- S. Claudet, Ph. Gayet, Ph. Lebrun, L. Tavian, U. Wagner
Pages 1301-1308
-
- M. Chorowski, Ph. Lebrun, G. Riddone
Pages 1309-1316
-
- G. J. Laughon, C. H. Rode, R. Ganni, W. C. Chronis, D. M. Arenius, B. S. Bevins
Pages 1317-1322
-
- M. Iarocci, J. Sondericker, K. C. Wu, Y. Farah, C. Lac, A. Morgillo et al.
Pages 1323-1330
-
- K. Aoki, Y. Doi, T. Haruyama, M. Kawai, T. Kobayashi, Y. Kondo et al.
Pages 1331-1338
-
- R. Maekawa, T. Mito, K. Takahata, S. Yamada, A. Iwamoto, K. Ooba et al.
Pages 1339-1346
-
- A. Kabe, K. Hara, K. Hosoyama, Y. Kojima, Y. Morita, H. Nakai et al.
Pages 1347-1354
-
- D. Chatain, J. P. Perin, D. Desenne
Pages 1355-1362
-
- M. A. Green, E. H. Hoyer, R. D. Schlueter, C. E. Taylor, S. T. Wang, J. Zbasnik
Pages 1363-1370
-
- A. Ballarino, A. Bézaguet, P. Gomes, L. Metral, L. Serio, A. Suraci
Pages 1371-1378
-
- L. Dufay, A. Perin, R. van Weelderen
Pages 1379-1386
-
- W. Erdt, G. Riddone, R. Trant
Pages 1387-1394
-
- K. Hosoyama, K. Hara, A. Kabe, Y. Kojima, Y. Morita, H. Nakai et al.
Pages 1395-1402
-
-
- J. A. Demko, J. W. Lue, M. J. Gouge, J. P. Stovall, R. Martin, U. Sinha et al.
Pages 1411-1418
-
- A. Anghel, B. Jakob, G. Pasztor, R. Wesche, A. M. Fuchs, G. Vecsey et al.
Pages 1419-1426
About this book
In recent years, the technology of cryogenic comminution has been widely applied in the field of chemical engineering, food making, medicine production, and particularly in recycling of waste materials. Because of the increasing pollution of waste tires and the shortage of raw rubber resource, the recycling process for waste rubber products has become important and commercially viable. This technology has shown a great number of advantages such as causing no environmental pollution, requiring low energy consumption and producing high quality products. Hence, the normal crusher which was used to reclaim materials, such as waste tires, nylon, plastic and many polymer materials at atmospheric 12 temperature is being replaced by a cryogenic crusher. • In the cryogenic crusher, the property of the milled material is usually very sensitive to temperature change. When a crusher is in operation, it will generate a great deal of heat that causes the material temperature increased. Once the temperature increases over the vitrification temperature, the material property will change and lose the brittle behavior causing the energy consumption to rise sharply. Consequently, the comminution process cannot be continued. Therefore, it is believed that the cryogenic crusher is the most critical component in the cryogenic comminution system. The research on the temperature increase and energy consumption in the cryogenic crusher is not only to reduce the energy consumption of the crasher, but also to reduce the energy consumption of the cryogenic system.
Reviews
about previous volumes:
`The Advances in Cryogenic Engineering series provides a timely and authoritative entrée to the field for the outsider. For the insider, it is a must.'
Materials Science and Engineering
`Provides in-depth coverage of current research on technical materials of primary interest in the cryogenic engineering community, reviews important breakthroughs of the past, and outlines directions for future research.'
Cryogenic Information Report
`An interdisciplinary review of all areas of low-temperature technology, this significant series annually updates existing knowledge of cryogenic processes, equipment, instrumentation, properties, and applications....The literature source for many important new discoveries in the field.'
IEEE Spectrum
Editors and Affiliations
-
AMAC International, Inc., Newport News, USA
Quan-Sheng Shu