Abstract
The basic damping properties of composite lathe structures are analyzed by modal diagnostics. New experimental results and literature data from non-Russian research are employed. The damping properties of cast-iron and composite lathe structures are compared. The composites considered are ferrocement, polymer concrete, and metal concrete.
Similar content being viewed by others
REFERENCES
Dos’ko, S.I., Modal diagnostics of machine engineering constructions: principles, technologies, and use, Trudy mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Intellektual’nye sistemy izmerenii, kontrolya i dispetcherizatsii izdelii v promyshlennosti,” g. Moskva, 28–29 oktyabrya 2014 g. (Proc. Int. Sci.-Tech. Conf. “Intelligent Systems of Measurements, Control, and Dispatching Products in Industry,” Moscow, October 28–29, 2014), Moscow, 2014, pp. 241–242.
Grigor’ev, S.N. and Vetrov, S.I., The effective use of composite metal-concrete base parts in lathes, Vestn. Mosk. Gos. Tekh. Univ., Stankin, 2009, no. 4 (8), pp. 1–13.
Rahman, M., Mansur, M., and Chua, K., Evaluation of advanced cementation composites for machine-tool structures, Ann. CIRP, 1988, vol. 37, no. 1, pp. 373–376.
Weck, M. and Kerstiens, P., Verbundwerkstoffe mit Kunststoffmatrix im Werkzeugmaschinenbau, Tech. Rundsch., 1986, vol. 78, no. 22, pp. 52–59.
Gusarov, S.V., The IMC-1i software for identification of mechanical systems in the frequency domain (interactive version), in Vysokie tekhnologii i fundamental’nye issledovaniya (High Technologies and Fundamental Studies), Kudinov, A.P., Ed., St. Petersburg: S.-Peterb. Politekh. Gos. Univ., 2010, vol. 1, pp. 127–135.
Gol’denberg, L.M., Tsifrovaya obrabotka signalov: uchebnoe posobie dlya vuzov (Digital Signal Processing: Manual for Higher Education Institutions), Moscow: Radio i Svyaz’, 1990.
Kukharenko, B.G., Research of system dynamics by Prony’s method based on time series, Tr. Mosk. Fiz.-Tekh. Inst., 2019, vol. 2, pp. 176–192.
Marple, S.L., Jr., Digital Spectral Analysis with Applications, Englewood Cliffs, NJ: Prentice-Hall, 1987.
ACKNOWLEDGMENTS
Financial support was provided by the Russian government (project 9.8514.2017/BCh, 2017).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Utenkov, V.M., Dos’ko, S.I., Molchanov, A.A. et al. Modal Diagnostics of Lathe Designs with Composite Bases. Russ. Engin. Res. 39, 726–731 (2019). https://doi.org/10.3103/S1068798X19090223
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19090223