Abstract
The structure of linear negative matrices for the manufacture of Fresnel lenses and prisms is analyzed. The requirements on the equipment and cutting tool for the machining of negative matrices are discussed. A manufacturing technology for the matrices is outlined, and test results are presented.
Similar content being viewed by others
References
Davis, A. and Kühnlenz, F., Optical design using Fresnel lenses. Basic principles and some practical experiment, Opt. Photonics, 2007, no. 4, pp. 52–55.
Gaurav, A. Madhugiri and Karale, S.R., High solar energy concentration with a Fresnel lens: a review, Int. J. Mod. Eng. Res., 2012, vol. 2, pp. 1381–1385.
Sierra, C. and Vázquez, A.J., High solar energy concentration with a Fresnel lens, J. Mater. Sci., 2005, vol. 40, pp. 1339–1343.
Khamooshi, M., Salati, H., and Egelioglu, F., A review of solar photovoltaic concentrators, Int. J. Photoenergy, 2014, vol. 14, pp. 1–17.
Andreev, V.M., Ionova, E.A., Kalinovskii, V.S., Pokrovskii, P.V., Rumyantsev, V.D., and Khazova, E.V., RF Patent 2456645, Byull. Izobret., 2012, no. 20.
Grubyi, S.V. and Lapshin, V.V., Simulation of the process and the technology development of high precision processing of flat reflectors of single-cutter diamond milling head, Nauka Obraz., 2014, no. 2. doi 10.7463/0214.0699743
Lapshin, V.V. and Grubyi, S.V., Improvement of accuracy and quality of diamond edge cutting of plane surfaces, Vestn. Mashinostr., 2015, no. 5, pp. 57–62.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.V. Lapshin, E.M. Zakharevich, S.V. Grubyi, 2016, published in Vestnik Mashinostroeniya, 2016, No. 7, pp. 60–65.
About this article
Cite this article
Lapshin, V.V., Zakharevich, E.M. & Grubyi, S.V. Machining of linear negative matrices for Fresnel lenses and prisms. Russ. Engin. Res. 36, 826–830 (2016). https://doi.org/10.3103/S1068798X16100105
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16100105