Abstract
The contribution of tool error to machining precision is examined.
Similar content being viewed by others
References
Belyakovskii, V.P., Seligei, A.M., and Gol’draikh, G.M., Conical Tool Joints with Small Inclination, Stanki Instrum., 1979, no. 6, pp. 15–17.
Konicheskie soedineniya: Sprav. posob. (Conical Joints: A Handbook), Zhuravlev, A.N. et al. (Eds.), Moscow: Mashinostroenie, 1968.
Kuznetsov, Yu.I., Maslov, A.R., and Baikov, A.N., Osnastka dlya stankov s ChPU (Equipment for Numerically Controlled Machine Tools), Moscow: Mashinostroenie, 1990.
Maslov, A.R. and Balkov, V.P., Using Tailpieces with 7:24 Taper and Possible Alternatives, Struzhka, 2004, no. 1, pp. 30–32.
Ukrazhenko, K.A., Method of Assessing and Selecting the Type of Tool System for Multipurpose Machine Tools, Vestn. MGTU Baumana, 2003, no. 4, pp. 95–105.
Ukrazhenko, K.A., Increasing the Rigidity of Tool Systems for Multipurpose Machine Tools, Aviatsionnaya i raketno-kosmicheskaya tekhnika s ispol’zovaniem novykh tekhnicheskikh reshenii (Aerospace Technology Using Technical Innovations), Rybinsk, 2006, vol. 2, pp. 170–173.
Yurkevich, V.V., Determining the Machining Precision for a Machine Tool, Stanki Instrum., 1999, no. 4, p. 15.
Lizogub, V.A., Influence of a Machine Tool’s Spindle Parameters on the Machining Precision, Stanki Instrum., 2003, no. 3, p. 16.
Yurin, V.N., Thermoelastic Effects That Ensure Machining Precision, Stanki Instrum., 2001, no. 10, p. 8.
Levin, Z.M. and Reshetov, D.N., Kontaktnaya zhestkost mashin (Contact Rigidity of Machines), Moscow, 1971.
Denisenko, A.F., Kazakova, O.Yu., and Novikov, A.Yu., Experiments on the Basing and Attachment Precision for Tools with a Conical Tailpiece in Systems for Automatic Tool Replacement, Mezhdunar. Konf. Vysokie tekhnologii v mashinostroenii-2006 (2006 International Conference on High Technology in Manufacturing), Samara, 2006, pp. 101–106.
Denisenko, A.F., Petrushin, V.I., and Kazakova, O.Yu., Operation of Systems for Automatic Tool Replacement, Stanki Instrum., 2007, no. 2, pp. 2–6.
Denisenko, A.F. and Kazakova, O.Yu., Formirovanie ekspluatatsionnykh kharakteristik mekhanizma avtomaticheskoi smeny instrumentov (Operational Characteristics of Systems for Automatic Tool Replacement), Volgograd: Izvestiya Volgogradskogo GTU, 2007, pp. 26–30.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.F. Denisenko, O.Yu. Kazakova, 2010, published in Vestnik Mashinostroeniya, 2010, No. 5, pp. 46–50.
About this article
Cite this article
Denisenko, A.F., Kazakova, O.Y. Improving metal-cutting precision by attention to tool-replacement systems. Russ. Engin. Res. 30, 473–477 (2010). https://doi.org/10.3103/S1068798X10050102
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X10050102